Will this work on like bike CRANKS the part it attaches to pedals well my crank got stripped i need to fix it but not paying 100 for cranks if i use this to glue my pedal and crank inside part were it stripped will it hold up?
can you maybe give an estimate on how many times the original volume it expands by? thank you and also i agree with someone else's comment, i think clamping is highly suggested
Wouldn't it be better just to clamp the joint somehow while it's drying so it doesn't come apart? I think they suggest it right in the directions on the bottle.
Do any of you think that Gorilla Super Glue is good? I need an adhesive that'll withstand a lot of force, that you apply to hard plastics. I want to be able to slam a hammer onto the fused objects and not have the bond break.
Gorilla glue sets-up rather quickly, but you have a few minutes to play with it before it begins to bond/expand. The warmer the room, the quicker it will set up.
If you use clamps like it says in the directions then you wont have this problem
edpokemon43 2 months ago
i like dynamite joints
andyass3 1 year ago
Will this work on like bike CRANKS the part it attaches to pedals well my crank got stripped i need to fix it but not paying 100 for cranks if i use this to glue my pedal and crank inside part were it stripped will it hold up?
YooTooPoo 1 year ago
@YooTooPoo jb weld made specifically for metal
mcfartard 1 year ago
how do you get it off skin?
demon1023 1 year ago
can you maybe give an estimate on how many times the original volume it expands by? thank you and also i agree with someone else's comment, i think clamping is highly suggested
belrocksg 2 years ago
Wouldn't it be better just to clamp the joint somehow while it's drying so it doesn't come apart? I think they suggest it right in the directions on the bottle.
pjwarez 2 years ago
This has been flagged as spam show
Do any of you think that Gorilla Super Glue is good? I need an adhesive that'll withstand a lot of force, that you apply to hard plastics. I want to be able to slam a hammer onto the fused objects and not have the bond break.
magitinacopper 3 years ago
how can u get it off ur fingers?
up4troublelater 3 years ago
its on my fingers
shootdomain 3 years ago
This has been flagged as spam show
@shootdomain try acetone or alcohol based liquids such as nail polish
MacsCanfly 2 years ago
eventually it gets carried away with your skin flakes
JungleFish 3 years ago
soap and water
TasinTurtle 2 years ago
@up4troublelater try acetone or alcohol based liquids such as nail polish
MacsCanfly 2 years ago
lol joint.
MakoSucks 3 years ago
Gorilla glue,rules
crypter27 3 years ago 2
would you be able to bond PVC to metal with this?
liquidflorian 4 years ago
you can bond anything to anything, lol.
Mekill60 3 years ago
except clothes =)
Algidcomedy 3 years ago
can I glue a 2" x 2" to a sheet of glass using this stuff? I had to use shoegoo(as you can build it up) to glue some other components
to the same glass...but I want a thinner film bond between the glass and wood. Is glass too shiny for Gorilla to work??
shoegooguru 4 years ago
the 2" by 2" is unpainted wood.
shoegooguru 4 years ago
I never used this glue, so the tip about set-up time is a good one.
tinkerer2 4 years ago
Loved the voice over. ;-) Very informative.
erynn619 4 years ago
Gorilla glue sets-up rather quickly, but you have a few minutes to play with it before it begins to bond/expand. The warmer the room, the quicker it will set up.
flgl06zrqm 4 years ago
@flgl06zrqm And also you can SNORT THIS FUCKING SHIT!
blakemanvideo2 1 year ago 2
how long does gorilla glue stay until it drys and its too late to attch something to it?
shakib666 4 years ago
I always wondered what made Gorilla Glue so special. Thanks for the tip!
andymanfsu 4 years ago 2
Interesing, I was not aware of this behavior... good to know.
drewbled 4 years ago