Yes! it works fine. Don't forget to update FW because original one is BS. You must have an lcd programmer box to update FW. Without an updated fw the esc is useless, i had a lot of problem with a 5.5t motor before updating.
the problem is not the fan but the way indicated to connect it if you invert the red and black from the indication of the esc it will run but now you have to try with a new fan cause that one is burned!!! the esc is not burned!!!
i complained & they have send me a 2nd one but havent tried it yet
i pulled the 1st one apart & the soldering was very dodgy ... not all strands of wires for the on/off switch were done properly & looked like they were touching
sensor wire conection didnt work
fan didnt work & over heated
fan would work in reverse polarity with a hobbyking fan
Yes! it works fine. Don't forget to update FW because original one is BS. You must have an lcd programmer box to update FW. Without an updated fw the esc is useless, i had a lot of problem with a 5.5t motor before updating.
capacitor1975 3 weeks ago
Does it still work ok?
danosborne661 3 weeks ago
The second arrived and it's good.
I confirm to use fan connector with reversed polarity respect the instruction.
It gave me a lot of problems, but ufter a fw update i can declare it's perfect!
I bought it for 30 euros, and its very good for the price.
without fw update its almost unuseable
capacitor1975 1 month ago
This esc works only for few minutes. Mine, after a deep accelleration, begin to work as if battery
were empty. this esc represent another epic fail of cheap chinese electronic.
I had to resolder wires in the switch because it was as i pressed the red button.
If you stay too much to solder wires on the esc, the golden pieces go off the mother board.
If you want a good esc, buy a speed-passion; it costs the triple, but you can go around with a problem-free experience. This esc is bull-shit-storm
capacitor1975 2 months ago
the problem is not the fan but the way indicated to connect it if you invert the red and black from the indication of the esc it will run but now you have to try with a new fan cause that one is burned!!! the esc is not burned!!!
Fastforwardss 3 months ago
i got 1 also from ebay & it didnt work
i complained & they have send me a 2nd one but havent tried it yet
i pulled the 1st one apart & the soldering was very dodgy ... not all strands of wires for the on/off switch were done properly & looked like they were touching
sensor wire conection didnt work
fan didnt work & over heated
fan would work in reverse polarity with a hobbyking fan
so far i think they are crap
Bing05lee 3 months ago
does this work...
is it worth buying?
MRG12EG 3 months ago
bull-shit-storm
capacitor1975 3 months ago
hi there i guess you got this ESC from EBAY i was looking into to buying one of these do rate good or bad
YOYOMAN786 3 months ago