JG g36c Assembly part 1

[jtlachappelle]

Nice job IDIOT....as youre putting the trigger/spring back in you say that "the trickiest part about this" is doing the spring, but then you only show if for half a second and its all out of focus. Sweet work jackass.

[noahsmorris]

Thanks a lot you helped me a ton!!!

[littlebootman2]

what is the little spring square spring button for infront of trigger

[DisguisedAirsofter]

@littlebootman2 in front of the trigger in the trigger guard area? I've got no idea, it doesn't serve any purpose on the airsoft gun. I don't even put those back in my own guns.

[littlebootman2]

@DisguisedAirsofter thanks bro. and nice vid to, very helpful

[navyteccs]

@DisguisedAirsofter hay the wires that come out of the left side of the gearbox that connect to the wires keep getting fucked up. idk why but after a while my wires start to tear, i got it fixed a while ago now it happened again and im getting it repaired again. u have any idea.?

[ForTheFutureOfMusic]

@littlebootman2 bolt catch, you press it to release the bolt in real life. serves no purpose in this aeg.

[slipknot164]

Is the trigger meant to click after reassembly? If not, what did i do wrong? (it clicks in your video, but sounds wrong)

[2Tellthetruth]

Can you please help me. My JG G36C appears to work but has no air pressure. The piston under the clip moves back and forth but it lacks any air pressure sound. Can you please advise a novice. Thank you!

[CaveTarra]

@2Tellthetruth

Your piston O-ring might have broke.

[Vanillanougat01]

PLEASE HELP!!!!! I followed this vid. and now my gun wont shoot on semi-auto, it sounds like the piston spring is only being pulled-back partially.

WHAT SHOULD I DO???? 

[DisguisedAirsofter]

@Vanillanougat01 Take it apart again to see if you did something wrong and put it back together.

[Vanillanougat01]

@DisguisedAirsofter I've done that numerous times and the problem remains....is there something that I might have missed in your vid?

[a7xsyngatescustom]

hey ineed help!!! my trigger sticks on semi auto do u know what could cause this be cause it returns on full auto

[DisguisedAirsofter]

@a7xsyngatescustom So the trigger stays forward in semi auto and you need to push it back, but not in FA?

That one is easy. Just make sure your trigger spring is in correctly (assuming it was in at all) and it will function properly.

[DisguisedAirsofter]

@MrRaghead69

Yes, due to the lesser kinetic energy transferred through the system upon the pickup of the piston by the sector gear.

[marty1091]

dude i can't get the lil lever on the bottom by the bevel gear to come down. that's the only thing that keeps popping up when i try to put the case back on. everything else that ppl have probs with like the spring and trigger are fine. what do i do man?

[marty1091]

i wish it was HD i've never done this so i have no idea what to do lol. im screwed. i got parts all over my desk and i need to put it together somehow.and it's not like a lego where u just see if something fits, this shit is impossible to know where everything goes.

[WarinhulAirsoft]

@Articfox1095

Ditto

[ArcticFox1095]

i hate putting those clone gearboxes together. i generally need 4 hands; 1 to hold trigger, 1 to hold anti-reversal latch, 1 for the spring/piston, and 1 to put the shell on. :/

[kanestuartskates]

yo thnx man your like the only guy that shows how to put it back together without skippin bits but will you make a vid or tell me how you made the trigger stay dere in tension coz when i do it it just pulls bakc?? 

[JAMProductions313]

hey its easier to put the mechbox together then slitghy close it then install the trigger trust ive upgraded it helps a ton

[tcv4]

should i get this or a jg sig 552

[DisguisedAirsofter]

@tcv4

I would get the G36 because I have heard of problems with the sig line.

[tcv4]

is the piston gear/ shaft metal because a review of it said that stripped and now bbs roll out the front

[DisguisedAirsofter]

@tcv4

The piston is a white polycarb that comes with most clone aegs. Metal pistons will damage your gearbox. It is much stronger than people make it out to be, and when the aeg is put together properly, it will last a long time. I have one on those pistons running at 35 rounds per second on a sp110 spring currently for example. Where waas the review? If it was made by someone on a retailer site, than it either is a lemon or they have no clue what they are talking about.

[tcv4]

thanks thats what i thought but wasnt sure. i think the guy just put it together wrong or got a lemon. but he did say he took it apart so...

[toxical1ty]

finally an actual motion video.. im fixing my friend's gun i was making sure i knew wut i was doing

nice vid

[DisguisedAirsofter]

thanks

[thehunted21432]

Thanks for the video. I was thinking about upgrading the internal parts for my JG G36K but I didn't know how to reassemble the gun. But know I do. By the way, will the Systema Magnum Motor Short Version fit in a G36?

[DisguisedAirsofter]

Yes, the systema magnum short type will fit in a g36. Thanks for commenting, and good luck upgrading.

[thehunted21432]

Thank you.