JG BAR-10 airsoft sniper

[campinggear1]

great vids

[EmazingAzn]

Which is the better sniper rifle among the following:

TM VSR 10 PRO

TM VSR 10 G SPEC

JG BAR 10

CA m24 ENCHANCED

ECHO 1 M28

[poc95lol]

@EmazingAzn

-tm vsr lot of money.

-jg bar 10 cheap, marui clone lot of upgrade parts.

-echo1 m28 great fps from the box! i vote for JG BAR10

[jikchi1234]

Nice crocs

[1undeadskater1]

Epic Load out- Modified Kar98k (Gas), replace the Kar's barrel and bolt (all of the stuff thats not wood on top) with the JG BAR bolt and barrel. You can also cut out the area below where you'd usually put in the shells for the Kar, where you can put a magazine. THIS PROCESS TAKES TIME AND EQUIPMENT(sanding, cutting, ), SO PLEASE, ONLY ATTEMPT IF YOU HAVE SKILLS WITH WOOD WORK.

[RedFries3]

HOLY CRAP IT CAN GO THROUGH 2 POP CANS this guy is some serious stuff lol you can flick a pop can and put a dent in it

[HFH883]

nice crocs with socks

[remohugo99]

how long range to jg-bar10???

[darthturner122]

how do you make that awsome mag

[silentDMX]

such a light gun

[Paintballa4life96]

SELLING AIRSOFT SNIPER 450 fps WITH BIPOD AND 3X9 scope with 2 clips - PM IF INTEREST

[fordtruckrule]

Id like to see you shoot that cheap bastard through the bottom that can from 50 yards away lmao ooooh wait you can't thats right because thats a fucking toy get a real BB gun or a real gun

[split142]

@fordtruckrule your such a fucking tard. The only reason its not a real gun or a bb gun is so he can play against other people fucktard.

[fanofCOH]

@fordtruckrule but you cant shoot your friends?

[KenshenSim]

In the words of the gangster from Hard Boiled "this gun'll shoot through two cans come out and kill a guy!" XD kick ass

[bbgunhevern]

hi mate wat knd of mag is this and or how can i get my mag to hold more for as cheap as possible because in the uk the normal mags are a 10 pounds each ????

[muluukkunen]

Sry, I didnt watch whole vid.

[nitromehane189]

correct me if im wrong but from your info it says you play as a designated marksman with the jg bar-10? that is techinally not true as designated marksman usually uses a designated marksman rifle. DMRs are semi automatic. so you will still be considered a "sniper"

[jugglingmaster2]

why would you ever need a 300 or whatever round mag for a single shot bolt action sniper rifle, a nice bit of ingenuity but not really that practical

[Asken96]

how close are you? 100 ft ? 50 ?

[AbleSquadSniper]

Lol that mag looks gay

[josieonetoothh]

$50 on a sling? $1200 on a gun? omg....

[Nick98l]

you shouldnt hold the can while shooting it so you can see the FPS. look up poor man's chrono

[fightinairsoft]

is it good and reliable without upgrades?

[Iinspir3d]

correction, it doesnt show that it shoots well, it shows that it shoots hard, shooting well would require showing that it has accuracy

[shortstop202]

What type of hi cap mag is that?

[thenameisjulio]

cool u need to put a how to on he mag

[maruishotgun]

I've been thinking a Jing Jong Bar-10 and now I know that I will buy one of those. what does it cost? and from where did you buy it?

[Iinspir3d]

they cost around 100$ from any website, and with 50-100$ in mods you can have a realy good cheep sniper rifle

[drsatein]

where did you get your high cap mag at?

[rama4suns]

Hey That Is Really Creative of You! I Envy Your Tinkering Abilities! Can You Make Me One n I'll Buy It From You? lol:P

[MOOSERVERTE]

could a normal jg bar-10 do dat?

[xxABIGBOYxx]

yea and the spring doesn't get weak eather

[AirsoftGhillie]

shoot that dog while your at it...

[thetrazor]

exacly, takes much work to get an airsoft sniper acurate,, and those who put some work on there guns doesent seem to put out any videos...

whats needed is uppgrading hup up, butting some money on a rly good inner barrel, about an m190 spring the cylinder and everything in it... well pritty much all internals if u want an good airsoft sniper...

[formula90II]

Some tournies and places limit sniper rounds per mag. But honestly I don't think it matters all that much because he cannot rapid fire that gun.

It would be useful on a PSG-1 that has been heavily modified.

[thetrazor]

i dont even use high cap mag for my aeg^^ i dont need high cap, i hit when i shoot^^

star 30 cap is the shit!

[TreZeryoface]

But i mean that mag isn't pratical for sniping but its Hella Cool

[AUTGlitcher]

How many Joulöe does it has???

[thetrazor]

that depends on how heavy the bb is...

[lukazila111]

you should consider a barrel extension and a silencer to cover the barrel up. just a silence then is the same diameter as the guns out barrel

[SKBOMBERMAN]

i like how you spend a crap load of money to upgrade the gun and put that ugly ass mag into it when you still have the freaking orange tip

[stevenmichaelis]

The field where I was playing (as well as the Federal Law) requires that the orange tip is there.

[TreZeryoface]

I bet Skbomberman doesn't even own an airsoft gun cause his mommy think they are to dangerous. So why don't just shudup skbomber

[xxABIGBOYxx]

lol yea

good point

[thereaper8675309]

yo on the field if it requires it to be there just put black tape around it and its legal, it works for my field (=

[fanofCOH]

@stevenmichaelis actually federal law dosent require it. law only says you need to have it on their when you buy it/sell it

[hautala88]

where did you buy that magazine? i want one

[PoMPyRoMaGeOwnage]

arsoft is illigal in my country FFS thats why i cant get one...

[SmootheTank]

if you cant go thru a can with that gun at 0 inches, you probly got the crappy version, i got a 500 FPS for 130$

[justinyoface911]

I WANT THAT MAG!!!!!!!!

[TheAirsoftNewb]

you have to make it yourself with a m14 mag and a normal one

[lindenln23]

yeah buit think he was like 2inches away from the cans...

[skrimisher08]

that mag is freaken sweet i checked it out in the link you provided in the more info window very nice

[justinyoface911]

where did you get the extended mag?

[stevenmichaelis]

I made it. You might consider reading the info I posted.

[MATTNATTMATT]

my g36c can go though those at that distance

[ila6435]

not a BAR

[stevenmichaelis]

Not a gold bar, nor a rebar, not a bar where you get some beer. But it is a JG BAR 10 Airsoft Sniper Rifle by Jing Gong. Next question....?

[justinyoface911]

dude, where did you get the extended clip for the gun?

[Masturcheef1000]

how powerfll is it at first ?? will it go all the way through one can ?

[maxp8ntballer]

if it can go through 2 in the video, than it will go through 1. DOOOYYYY!!!

[lordkcaptainx]

actually not much...ive tried a few times with a stock JB bar 10 and it only dented it from like...10-30 feet

[stevenmichaelis]

It is important to know that increasing the spring quickly begins to make everything break -- the lip on your stock plastic piston starts to get eaten fitst, and then the others fail too. With a big spring you MUST also replace all those parts. Mine begain to fail after about 20 shots.

[stupidawesome123]

can you give me a list of upgrades applied. did you use the air brake mod or just new spring guide, spring, and piston. oh and where did you get that mag.

[mikekong13]

wait so that 150 spring made ur gun slam fire? should i get like laylax or deepfire sears cause theyre mad expensive...and do u know if the sears are plastic or metal cause airsoftgi are selling replacements that are metal and cheap, probably not the best quality but im low on cash

[Changmoblie45]

you paid 50.00 just for a sling!!!!!!! stupid

[stevenmichaelis]

Thank you for sharing your thoughtful insight.

[Lizzard343]

You'd die if you knew what I spend and what I would spend on gear.

[rs954]

wuts with the m14 mag?

[atal0071]

so what was this review about??

[mikekong13]

that magazine is AWESOME, so uh wat mods did u do?! airbrake mod?

[stevenmichaelis]

I do not remember what mods I did -- it was a while now. The most important thing that I did was I became a student of the gun. I read everything I could. I disassembled it so often that I could do it with my eyes closed, and I studied every part.

Then I worked to make them all work together better. The most important thing was securing a good air seal. There lots of other things too, like tight bore barrel, big spring, and trigger & sears parts, but I don't have room for that here.

[spartan117even]

where'd you get that mag?

[ITIAirsoft]

Why would you want a Hi Cap mag on a simi auto sniper?

[noobynico]

lol its not semi auto its bolt action.. idiot.

[monskie1969]

where didi you get that hi cap magazine?

fps?

[ztejas13]

That magazine makes the gun ugly as shit

[Aaidas2]

Wich 1 should I get for beginer the jg bar 10 or the well l96?

[zewfilms]

i have the well l96 and i love it!!!!!

[Georgeee1995]

where did u get that mag ?

[Sgtbullet69]

Just read the extra info

[Georgeee1995]

for a second there i tought u had a m14

[EMOISNOTMUSIC]

did you upgrade the internals on that at all? or is that stock? im wondering because i am in the market for a bar-10 myself and i want to get an idea of the chrono

[Sgtbullet69]

Stock fps is around 360 or so @ sea-level

Once the airbrake & teflon mods are done, you're

looking at 500fps without any real upgrades.

[stevenmichaelis]

Many people say this, but it was not my experience. For me 500 fps required a bigger spring.

[Sgtbullet69]

You're right. I've worked on mine quite a bit, just sealing everything nicely, but it's just under 500 at the moment. A bigger spring will push it over nicely.

[crackis4losers]

I like everything but the high cap mag. Some places wouldnt even let me play with that (theres some real douch bag airsofters in michigan).

[dataznthang]

r all airsoft snipers spring? cuz im gettin bar-10, but dont want a crapy 1

[bongo9090]

Bar 10s are not crappy..

its soo accurate if you set ya sights properly

[FatmanH]

Spring is not crappy if thats what you're saying

Spring pistols are shit

Spring assault rifles are shit

Spring snipers are the epic win

[darknessfalls714]

true :]

[atomicboii619]

Where did you get the mag? Im planning to get a JG BAR myself and i have to find out where you got thatXD

[stevenmichaelis]

I made a mag. If you read the "(more info)" there is a link to a write-up of how I made it.

-steve

[atomicboii619]

haha ok ty=]

[Photoshopper259]

how much FPS?

[drumlishus]

were u get the mag all i c on line r 30 round mags

[unwind1975]

Steve your CRAZY!

[hazzern]

yo where did u get the mag from??

[ziegler117]

dude, any every gun that i have ever bought have been able to shoot though empty cans at point blank. try doing it from a hundred feet next time.

[brutalback]

It's the poor man's chrono, genius...

[JakeT35]

no but a can is used to measure fps that gun did the cans top edge so that means 400-420 fps through the top middle is 421-550

[XxBuzzkill77xX]

range dumbass, 10 bucks says it won't do that at 50 feet

[nickzang]

how much?

[MrGuy266]

No no...you misunderstood...i am asking is he the kinda "airsoft sniper" that dresses up in the ghillie suit and is stealth...or does he just have a sniper rifle as a secondary...i am only curious

[MrGuy266]

Hey only curious here...are you the kinda sniper that has the ghillie suit, or you just have the sniper rifle?

If you are the "real" sniper (with the ghillie suit and stuff) then a high cap mag isnt good...cuz the mag will rattle and create noise...

(JUst giving you a heads up)

[Marthix]

If he were a "real" sniper he wouldn't be shooting BB's from his gun, would he? =|

Also, if he does play and he doesn't play in a forest type area, a ghillie suit wouldn't be good.

[jonathonk14]

im getting the gun for chrismas im so excited i just cant stand it :}

[sch595]

nice where did u get that mag for the bar 10

[Sucram212]

Nice gun! -- Should I get a JG bur-10 or a UTG-MK96? Im not sure which one to get.

[stevenmichaelis]

I think the JG- BAR-10 is the better pick because of the incredible proliferation of upgrade parts. Because it is 100% compatible with the Tokyo Marui VSR-10, all the parts swap over. If you plan on upgrading, the BAR-10 is a good pick. However, I personally think the 96 series is a better looking gun.

[jimmyjon77]

definetely Bar 10 as it is much higher quality over the utg mk96, the plastic is 10 times better

[timrvs]

LOL, I was hoping you'd use it shut up that stupid dog.

[stevenmichaelis]

Hi Tim! Cool to see you!

[stevenmichaelis]

...what do you know about stupid dogs?! lol.

[timrvs]

I know they don't like 300 round magazine BAR-10's.......yipe, yipe, yipe. LOL

[pyxiefrog124]

how did you get a hi cap mag?

[stevenmichaelis]

I made it.

[pyxiefrog124]

how did you make it?

[Rizrsniper]

What upgrades do you have in it?

[BERTGES75]

hey when you fire your gun with the scope does it fire left a little bit

[masicurr]

i tryed that mod with my l96 but didnt want to mess up my m14 ans l96 mags.

[Blank00024]

where did u get that extended mag?

[123robo123]

can any one do a reveiw on the jg bar 10 (2-toned)

[alexsirghi]

where can i order jg bar-1??

[TheGmeister123]

is that mag extended because its put me off buying the gun. i hope not. :s

[zohar98]

YES IT IS

[tornemoheart]

before you sold it what internal modifications, if any, did you do it it? :)

i have one and want to know what the best internals are

thanks :)

[riese1111]

really nice gun! i bought the one some days ago and i hope i will get it the next few days. can you tell me wich mods you did to improve fps? would be very nice thx ;)

[Timmortal94]

doesnt matter

[Timmortal94]

That is a big mag lol how much does it hold/

[Blank00024]

300

[connor0236]

do u think tht the jg bar 10 out of the box could kill a squirrel

[thriftyh4xx]

no...it's an airsoft gun...

[djfiorini1]

where did you get this mag?? and what is it called? plz reply

[ryanliewcy6]

why a big mag..??

[xxswiftxx]

nvm.. i saw your name but can you just sell the mag?

[xxswiftxx]

is your name philosopher on air soft forum cause i saw that modded mag

[rockstar1060]

tell me where you got it and is it in any shops in the uk preferebly wales

[rockstar1060]

tell me where you got it and is it in any shops in the uk preferebly wales

[ryanliewcy6]

cool man