Lol... The wheels don't spin or turn, infact they don't even have suspension, and where's the steering wheel? Shouldn't you have indicators and brakes on this thing?! Looks like you failed big time.
Please note, all sarcasm was intended. There are some morons on Youtube. Good job & a great alternative to the £200+ (I'm British) slider kits that essentially do the same job!
@shouldigetit wheels are made to spin ... Without spinning you won't get a smooth video. the same as to slide camera on the table, so why to build it ?
@HSYNLI @HSYNLI WTFLOL?! Spirit levels are made to measure levels. Does that mean they shouldn't be used as camera slider tracks? If you don't have anything constructive to say, shut up. Douchebag.
@JBPTV dude, read attentively what I wrote there. I said WHEELS ARE MADE TO SPIN ! if you know they won't spin why did you put them there? You could slide anything on that level. I wasn't talking about the track. I was talking about wheels. You're so stupid. And for your attention I made a diy slider. watch?v=Wq21Vbuk0Gs
@manufan4eva If they moved, you'd have to make sure they were attached at exactly the same points on opposite sides of the piece of wood, OR you'd have to drill THROUGH the width of the wood to introduce an axle of some sort... It really would entail much more complication. With this example, even if your wheels aren't attached at exactly the same height or angle, all you've got to do is level your camera accordingly on your tripod head which you could attach to this simple setup.
@manufan4eva If they moved, you'd have to make sure they were attached at exactly the same points on opposite sides of the piece of wood, OR you'd have to drill THROUGH the width of the wood to introduce an axle of some sort... It really would entail much more complication. With this example, even if your wheels aren't attached at exactly the same height or angle, all you've got to do is level your camera accordingly on your tripod head which you could attach to this simple setup.
@manufan4eva Also, non moving wheels are still circular so will always slide far better than any other shape. If they come to a slight bump, although not ideal, at least they'll just glide over it rather than square edged sliders just digging in and causing the thing to stop and consequently messing up your video & making your entire project worthless.
@shouldigetit it would make it better if the wheels turned but not necessary- one problem if the wheels spun is that it might go off the end if you let go
@shouldigetit You have "allow instream advertising" selected in your "Advertising Options" They are playing commercials before your video, the one I saw was 1:30 long.
Yes. i've seen some youtube video where they tilted the camera on a tripod but only on two legs slowly forward. it made a flying-like effect towards the target they shot. that was great too. and the rubber ribbon to rotate the view. I like these.
Lol... The wheels don't spin or turn, infact they don't even have suspension, and where's the steering wheel? Shouldn't you have indicators and brakes on this thing?! Looks like you failed big time.
Please note, all sarcasm was intended. There are some morons on Youtube. Good job & a great alternative to the £200+ (I'm British) slider kits that essentially do the same job!
JBPTV 1 week ago
Can you message me the material list for this project?
chrishaze1 3 weeks ago
@chrishaze1 If you turn up your volume, he tells you in the video :)
JBPTV 1 week ago
This is a lovely rig, there is just one little problem.
The wheels dont spin.
bighardman33 1 month ago
wow i like this, thanx,
lokeydaniel 3 months ago
nice !!!
prostudiosHD 3 months ago
@mintweb25 K'nex
glennielp1 5 months ago
lol the tires don't spin
wakaphwap 6 months ago
@wakaphwap There are no tires and it does not need to spin. It's a "slider", not a "spinner".
shouldigetit 6 months ago 5
This has been flagged as spam show
@shouldigetit Zing!
WakeUpDummies 2 months ago
@shouldigetit wheels are made to spin ... Without spinning you won't get a smooth video. the same as to slide camera on the table, so why to build it ?
HSYNLI 1 month ago
@HSYNLI @HSYNLI WTFLOL?! Spirit levels are made to measure levels. Does that mean they shouldn't be used as camera slider tracks? If you don't have anything constructive to say, shut up. Douchebag.
JBPTV 1 week ago
This has been flagged as spam show
@JBPTV dude, read attentively what I wrote there. I said WHEELS ARE MADE TO SPIN ! if you know they won't spin why did you put them there? You could slide anything on that level. I wasn't talking about the track. I was talking about wheels. You're so stupid. And for your attention I made a diy slider. watch?v=Wq21Vbuk0Gs
HSYNLI 1 week ago
@shouldigetit if they dont need to spin, why did you use wheels lol? Im sure you will get much smoother video if you got them moving.
manufan4eva 3 weeks ago
@manufan4eva If they moved, you'd have to make sure they were attached at exactly the same points on opposite sides of the piece of wood, OR you'd have to drill THROUGH the width of the wood to introduce an axle of some sort... It really would entail much more complication. With this example, even if your wheels aren't attached at exactly the same height or angle, all you've got to do is level your camera accordingly on your tripod head which you could attach to this simple setup.
JBPTV 1 week ago
@manufan4eva If they moved, you'd have to make sure they were attached at exactly the same points on opposite sides of the piece of wood, OR you'd have to drill THROUGH the width of the wood to introduce an axle of some sort... It really would entail much more complication. With this example, even if your wheels aren't attached at exactly the same height or angle, all you've got to do is level your camera accordingly on your tripod head which you could attach to this simple setup.
JBPTV 1 week ago
@manufan4eva Also, non moving wheels are still circular so will always slide far better than any other shape. If they come to a slight bump, although not ideal, at least they'll just glide over it rather than square edged sliders just digging in and causing the thing to stop and consequently messing up your video & making your entire project worthless.
JBPTV 1 week ago
Doesn't really look like the wheels actually turn man? Minor design flaw there...
scottlarockwell 8 months ago
@scottlarockwell they don't need to turn, its a slider, not a turner.
shouldigetit 8 months ago 13
@shouldigetit Why not just make the wheel spin around, it would make the slider alot smoother
Exlr8Films 4 months ago
@shouldigetit if the wheels are not supposed to turn.. why use wheels? Just use and L bracket..
bymac3 3 months ago
@shouldigetit it would make it better if the wheels turned but not necessary- one problem if the wheels spun is that it might go off the end if you let go
TheMindstormsPodcast 2 months ago
The ad before this video is 1:30.... whoa...
GaragebandandBeyond 9 months ago
@GaragebandandBeyond Please explain.
shouldigetit 9 months ago
Comment removed
GaragebandandBeyond 9 months ago
@shouldigetit You have "allow instream advertising" selected in your "Advertising Options" They are playing commercials before your video, the one I saw was 1:30 long.
GaragebandandBeyond 9 months ago
@GaragebandandBeyond thats funny. May I ask how you stumbled upon this video?
shouldigetit 9 months ago
@shouldigetit on a search for a DIY slider project
GaragebandandBeyond 9 months ago
@shouldigetit idk what he is on about coz it says free online games
50cliber 8 months ago
kewl!!
joemiked 9 months ago
cool!!! i was looking to do something like this
franrasore 11 months ago
@franrasore Awesome! Let me know if you make your own.
P.S I am currently tracking my order for my actual camera slider. I'll make a comparison video to see if it is worth the $100+.
shouldigetit 11 months ago
and if you use anything bigger than a minilense it will tip over :S
forreforre 1 year ago
Not bad buddy! check out my $5 slider video
defnyung 1 year ago
@defnyung Did you try that?
shouldigetit 1 year ago
im making one!!!
skater4life1000 1 year ago
@skater4life1000 Sweet. Leave a video response with sample footage?
shouldigetit 1 year ago
@shouldigetit u mind if a make a tutorial? lol
skater4life1000 1 year ago
@skater4life1000 That would be great. More tutorials = more ideas for people to see.
shouldigetit 1 year ago
@shouldigetit alright i made it and it is sooo nice.. thanks dude!
skater4life1000 1 year ago
@skater4life1000 NP. Mind linking my channel or putting an annotation in your vid?
shouldigetit 1 year ago
@shouldigetit yea ill put a big annotation!!!!!!!!!!! =)))
skater4life1000 1 year ago
right, I dislike this just because of the false thumbnail. it's just annoying.
good idea though.
NitsanPictures 1 year ago
It's great!
opeth84 1 year ago
@opeth84 Did you see the footage?
shouldigetit 1 year ago
@shouldigetit
Yes. i've seen some youtube video where they tilted the camera on a tripod but only on two legs slowly forward. it made a flying-like effect towards the target they shot. that was great too. and the rubber ribbon to rotate the view. I like these.
opeth84 1 year ago