How to disassemble & re-assemble a Airsoft M4/M16 High Cap Mag

[Revalutionize]

lol 2:22 voice crack no offense. NICE TUTORIAL!!!

helped alot

[ActionFilmsUnlimited]

Oh my! Thank you so much!

[clone723]

Im getting a lonex flash mag make a tutorial for that pls. And can you make one on how to dissasemble a classic army sportline m4a1 carbine please i really need to know ;(

[AlpacaFactory]

be careful not to put the metal guard thingy on the side of the spinning half circle on too tight or it will make the wheel too tight

[p8intballkid]

On my JG one (same one as in the video) It came without the wheel being able to stop, you could spin it both ways, so I stuck a flat skinny object in and moved it around and now it clicks and wont spin backwards, what caused it not to stay in the first place?

[p8intballkid]

On my JG one (same one as in the video) It came without the wheel being able to stop, you could spin it both ways, so I stuck a flat skinny object in and moved it around and now it clicks and wont spin backwards, what caused it not to stay in the first place?

[tanluj]

OMG thanks sooo much my lonex m4 flash mag was messed up but it had a broken bb jammed and i had no idea how to take the mag apart but ur vid helped a lot thanks

[tanluj]

OMG thanks sooo much my lonex m4 flash mag was messed up but it had a broken bb jammed and i had no idea how to take the mag apart but ur vid helped a lot thanks

[diehardbum3]

If you would please, add airsoft in future titles. I got my hopes up for the gunpowder type of M4 magazine. I don't dock you on that, I just jumped a little soon.

[LukeExcell]

@diehardbum3 Not a problem Airsoft has been added to the title.

[blviking56]

i took my hi cap m4 mag apart to clean it and the coil in the gear that winds the mag up un-spooled can u make a vid on how to re-spool a hi cap mag

[blviking56]

My cog unspooled Any help?

[planetluke]

very informative, i know what to do know thx :)

[deathangelsairsoft1]

thank you!!!saved me $30 :)

[parthshah1234]

how much did this cost



[applekid64]

TY very helpful

[MyLastUsernameSuckd]

I followed your instructions until you pulled apart the magazine and made it into two pieces @3:25. Mine won't open at the bottom. Maybe it has an extra screw or something but I can't find one. Any suggestions?

[joboikickme]

@MyLastUsernameSuckd mine is like that too, you need to force it open, use a screw driver as a lever, i got mine fix, mine's problem is loose spring

[markhluber]

Your left handed. :D

[SherriesVideos]

6:04 (just put it through the hole like that)THATS WHAT SHE SAID! he set him self up so much icant even post all of the thats what she saids.

[SherriesVideos]

6:04 (just put it through the hole like that)THATS WHAT SHE SAID

[TacticalPukeInbound]

@LukeExcell can i use wd40 to clean this?

[LukeExcell]

@TacticalPukeInbound I'd advise not as WD40 is a metal lubricant and can corrode plastic parts over time. Stick to silicone oil or grease

[FreeRunCentral]

Mid cap.

[FreeRunCentral]

Can you do a disassembly and reassembly of a p90 mag?

[AOPish]

mine broke... now it wont wind

[LukeExcell]

@beaztin12jerkz I only got Midcaps for my AK47, but i'll look into it, see if i can get a second hand one from someone

[daichi489]

thanks for telling me that

[daichi489]

does this fix your gun too?

[LukeExcell]

@daichi489 ....no.....this fixes the high cap magazine only

[0mgwtfbbq21]

and one more thing, i also have 10k rounds of unused bbs, are they still functional? only one bag is open and ive taken out like 20 bbs out of there :P

[LukeExcell]

@0mgwtfbbq21 U can still use those bb's there be perfectly fine, bb's have no expiring date :P

[0mgwtfbbq21]

@LukeExcell good! didnt wanna waste 40 bucks :P

[0mgwtfbbq21]

hey luke i bought 4 g&p mid caps like around september of 2010 and i havent used them at all yet, will they still work? i also bought some hi cap p mags, would they still work? thanks if u reply :D

[LukeExcell]

@0mgwtfbbq21 yea they'll work with no problems, thats assuming u haven't left them loaded with bbs for the last 4 months :P

[0mgwtfbbq21]

@LukeExcell not at all :D

[Walkman1OldSchool1]

where does the lock u took out that looks like a star go?

[LukeExcell]

@Walkman1OldSchool1 It goes on the big crank wheel when its together it fasten it tight. Check video from 8:24 i tell how it goes on then :P

[jonee140]

i have a plastic small piece that has 3 like branches 1 mid top another 1 mid bottom and one at bottom wha is it

[MrSleepyPuppy]

This tutorial helped a ton with painting my highcaps so they'd match the paintjob I did on my m4

[drakerr87]

thanks for this tutorial,very usefull

[rockon88888888]

Thanx alot...This video helped me very much.

[KairoScelus]

OMG this was such a big help!!! i had two huge rocks that got into my feeding chamber right before the spring that releases the bbs and i took a knife and tried to get it out the top but ended up cutting the plastic and now it dont feed right but then i found this vid got the rock out and felt like a dumbass

[xxMRGRENADExx]

the main wheel on mine that has all the tension came undone it was broke before disassebly how do i fix it?

[LukeExcell]

@xxMRGRENADExx skip to 5:45, this stage shows how to replace the spring onto the big wheel. Watch the video all the way through it shows you how to competly take it down and put it together so your problem should be fixed if you follow it unless its something thats snapped or cracked off and isn't clip on.

[xxMRGRENADExx]

@LukeExcell Ya my mag is past repair the bent part in the coil that attaches to the wheel had broken off so ill just get a new one instead of trying to fix it

[ghostsniper29]

the cap slider thing that covers where u put the BB into the mag will not open, i have determined that the slider piece thingy is not on the correct track and therfore will not slide, i cannot get this thing removed nor can i get the screw on the bottom to come off, is there anyone that can help me please?, ive never taken this apart so i do not know how this issue has manifested >.<

[TheHairyJacketMan]

Thanks for posting this vid it helped ALOT!!! :)

[TheHairyJacketMan]

Thanks for posting this vid it helped ALOT!!! :)

[spacedooky42]

Thank you! I found this silver semicircle piece in my hi cap that was rattling around. I read that it helps unwind the mag, but I dunno where to put it so I took it out. is this bad for the mag? Thank you again.

[LukeExcell]

@spacedooky42 if you stop the video at 2:43 you can see the semi circle counter weight. I'm not sure how it fits on or if it can be put back on if it breaks off.

but you can see the from the video where it sits on the magazine.

[halosucks22]

Where do you get the silicone spray?!?!?!?!?

[LukeExcell]

@halosucks22 Most of the majour airsoft retailers sell it

[BangkokAirsoft]

my chinese magazine was a NIGHTMARE thanks for the video helps A LOT

[MaurqelHbkWatts]

thanks !!!!!!!!!!!!!!!!!!!!

[T0byA]

And this is the caSIIING 2:23 :L

[LukeExcell]

@T0byA lol

[LukeExcell]

@FreerunnerAirsoft I was implying to manufatures, i completely assure nothing offensive was intended just a comment on build quality

[CRAAAZYMON]

Cool vid

[mattboxingfan]

I hate damn racists.......i joke this video doesn't prove anything......however i would never take my mag apart because i couldn't ever put it back together! Good vid though mate.