Custom BNSF Wrecked C44-9W Load - HO Scale

[AmtrakBoys]

were you modling a colision, fire... looks like wreck and fire

[CorneliusCorporation]

Umm... you know you could just strap it to some old TTX 89-foot flat, right? That's what BNSF usually does.

[BNforever2009]

thats nice!!!! You do the weathering jobs and superdetailing? Let me know. Got a few that needs good weathering.

[brickman067]

Very nice looking model, I saw one go through our town.

[trainzguy101]

are you selling this on ebay because there is one custom wrecked on there is that yours that you're selling?

[NSmodeler24]

Yes I am. This is the one. It ends this evening.

[ConrailDave1999]

NIce. You bought a real C44 and just screwed it up?

[madbeastification]

That is too cool!! I would pay $125 for those two cars!! Good job

[starguard]

That flat car with the trucks on it looks fine the way it is

[tartopfan]

dang that is cool it looks better than my wrecked engine XD. I think you need to send your engine to atlas or some company because I would like that on my N scale layout.

[yorktown1000]

love it

[joeyoung19475]

very nice handy work,thanks for sharing your talent...

[TheSd90mac]

Nice vid of the locomotive on the flatbed!

[sawman3333]

:( whyyyyyyyyyyyyy?!!!

[WorldOfNothin]

if no one else has told you, if you don't have a flat car big enough a lot of times you can see on trains hauling an oversize load they have a three flat car system! The middle car holds the weight while the two outside ones give the room for the overhang of the cargo so it doesn't hit the cars on the train around it!!! of course depending on the size of your curves on a model it might not work out the same lol

[MrWaka36]

how did you make that

[tothefuckingmoss]

Very nice!

[kf7strng]

And this.. Is how you tell manufacturers to go pound salt! Lets see ONE company that produces prototype wrecked units! Great job sir. Protect those hands. They will make you a millionaire one day!

[renotimothy]

the only problem i could spot was you need to get roller bearing trucks for the car. friction bearing trucks hve been banned for use on class ones since the 60s or 70s that engine is either to new for the car the or the car is outdated and could not plausibly be in service when the engine was in service without a truck upgrade. which the railroads actully do I kknow of alot of heavy BNSF (old ATSF) post war late 40s flat cars that have been converted into Concrete tie and welded ribbon rail cars

[ConrailDave1999]

Nice. I have a few customized train cars/locos too.

[2010californa]

wow nice

[amtrk128]

thats cool dude. that crew is dead. but I have to ask, why would you destroy such a beautiful engine????? If you had doubles I can see that.

[justincsx9999]

@amtrk128 Do you need a hearing aid?? He said he ''made it to look like'' that it was in a wreck.

[amtrk128]

@justincsx9999 I can HEAR just fine, as well as SEE just fine thank you very much. Proof??  I can CLEARLY HEAR YOU screaming like a little girl in your first youtube vid, and CLEARLY SEE that you cant film and focus on the train. Yes I UNDERSTAND he wants to make it look wrecked, but you as well as I know that is a beautiful engine and not a lot of people would destroy a new one. Go cry back to your train set now, and don't be getting on here saying stupid shit to others.

[NSFrankfort]

@justincsx9999 You are a turd. A worthless, scum-of-the-earth turd. Why don't you not pick on deaf people. Or people who prefer not to tear up trains.

[canadiantimberwolf1]

Nice talent there NSmodeler24, this can make you a nice bit of change on the side for sure.

[jaredkelly930]

Very cool

[curraheewolf]

Are there any updates on the BNSF wrecked unit on a flatcar? Very nice work on the wrecked unit by the way. Will you be sending any pictures of it to Model Railroader?

[NSmodeler24]

I havnt shown it since this video, but I did finish it. Ive never though about it but maby ill send a few and see if they use them..

[gtasandman]

@NSmodeler24 you sould show that to monter railroad 5*

[vivianvanhintum11]

i have 3 like this to looks great

[thatoneguy163]

thats pretty sweet,, we haul em just like that when somebody crashes em

[ble643]

by looking at t=it let me guess it rolled over nice load though

[CoastStarlight11]

Dang!!! Amazing work with that model. There are two trucks on either end of the car that has the engine.

[DJ4000VOLT]

nice 

[UP5853]

That War Bonnet must have gotten into a really bad wreck LOL :).

[CSXrules1]

was that the engine you won from als contest

[Weiberts]

Cool. I take it you melted the engine with a lighter?

[gnair227]

Nice

[104trucker]

nice job! i like the BN Flat car

[hoscalecody]

How is the flat car custom it looks like a regular flat car?

[NSmodeler24]

it was about 2 times as short, i replaced some of the side frames and it was custom painted

[PRRK4Lover]

Nice man!!! Im eventually gonna put an old bachmann AT&SF 4-8-4 steam engine and tender on 2 depressed bead flat cars, cant wait.

[NSmodeler24]

sweet! good luck!

[BNSF7508]

Good work! How were you able to make the loco to look wreced?

[NSmodeler24]

blow tourch

[Jamersonde]

@NSmodeler24 Very creative.

[meguell3]

@NSmodeler24 Just a tip but I found that a heat gun set on around 250 watts works best, no scorching and it doesnt bunch up the plastic.

[CMRSclub]

wow that looks great!! you did a really nice job on making the car, the engine, and everything i would love to try somthing like this!

[omari365]

i notest u dont have a cabose

[myowngod2]

This is looking real good.

[varacnahrim]

1 word beast that is amazing how did u build a custom car also how did u get 16 weeled car

[frontierfan]

wow great job

[xXDJIndeedXx]

Thats AMAZING,it looks so real lol.

man your good at that!

[trainamtrakcsx]

AWESOME THATS SOOOOO COOL

[darque29]

Thats some nice work. It looks great. Will i see it on ebay?

[shortline77]

I really like how the flat car came out. Great weathering and decals! It will be cool to see both cars and their loads running around your layout.

[UnionPacificRules]

U putting it on ebay!?

[JakBal3112]

looks great. Nice work on the flat car too!

[MegaJtrain]

how did you make it look like that? hammer?

[jimmyp42002]

soldering iron, heat gun, etc. adam did one like that as well.

[NSmodeler24]

Heat (from the blow torch) and molded and formed it with pliers

[things343]

wow thats detailed

[guitar446]

very cool  10*

[spazman13579]

Why did you have to ruin all the cars that you won from Al's contest?

[NSmodeler24]

I didnt ruin any cars from Als contest. These are completely different ones!