Dynam 4 Channel Extra 330 3D Aerobatic Brushless RC Remote C

[jack10996]

dont bother with this plane, its a wast of time. if flys ok, not enough power to do a prop hang as i tryed many times. if you do have this plane, get a new motor from a diffrent time or just buy a new prop shaft as the prop shaft if very flexabal and easly breaks. mine broke just from a nose over on a grass landing. i had a crash with mine not to long ago thats to ether the radio or plane as it just spun and there was no imput that i could do to change it.

get a new radio for it like the dx6i

[dragonbreathstinks]

I'm going to give mine a custom paint job to look like a WW2 plane.

[lolziloveminecraft]

why decals? just use spraypaint and tape!

[kangb22]

can i just paint the plane instead of the decals

[KrazyD420Mofo]

why can i not get my Rx from my blade 400 to work in this plane i was trying to use my dx6i

[PPPatrickWWW]

@KrazyD420Mofo Did you start with a fresh model in the model memory, set to acro, not heli? And then rebind it to the new model?

[Had2Ask]

I believe you had to bend the wires due to incorrectly mounting the horn on the upper side of the elevator. It should have been mounted on the bottom (180 out from how you did it). Then everything aligns correctly

[geminimen]

Hi Dave, I just bought this dynam extra 330 from hobby king. I dont have the lipo 1250 so i put a 11.1v 2200mah standard size 3 cell. but its size is larger than the 1250 mah 11.1v it comes with. Im a bit unsure about the weight difference of these batteries on this plane. Can you please suggest if it is ok to use the statndard size 11.1v 2200 mah lipo pack on this plane.

Kindly Advise.

Thanks

[tacos4u632]

should i get this 3d plane or the yak 54 3d plane?

[diegoyabo]

Hi, I want this extra 330 Dynam plane but with a 2,4Ghz Transmitter. Is that possible?

thanks.

[modernart86]

Hey Dave, how did you wire/install your lights on this? And what sort of battery were you using to power the lights? Thanks in advance ^_^!

[demon6xx]

Do you glue the landing gear to the plane? The instructions only says use the screws thats already on there but it doesn't reach the foam at all. Can any one help please?

[twhiteman42]

Why won't you respond to Questions ???? And to the other guys there is no nut, just an O ring and it work as well a proll better on crashes lol. I like where everyone is fasinated by this guy's screwdriver instead of incorrect build. The plane does fly nice though, I got one and you have to stay with it but it fly's Great :) I will post on Todds Hobby Page :)

[DirtyWyteBoy75]

Did you put a nut on your prop to hold it because in my kit it didn't come with one

[tanman77au]

@DirtyWyteBoy75 yeh... mine didnt come as well with that kinda nut...

[twhiteman42]

you put the rear wing on upside down and the servo links on the wrong side ?? did you switch the plugs on reciever to correct your mess up ???

[lordtangent]

Dave, where did you get the SMD LED strips?

[kmscws]

would you recomend this to a begginer

[KawaFord27]

@kmscws Fuck no.

I got one, and crashed 10 times.

[EchoCharlieBravo]

Great video! Neat power screwdriver made from the old Kraft servo!

[Flumphinator]

Nitroplanes should be paying you commission, sir. You just sold a plane to me.

[CularisPilot]

how much power you have used for the vertical in the air?

[batmancrap753]

would you recommend this plane because i like it?

[sundown798]

Are the SMD strip lights any good compared to the after dark ones?

[CamCommandatore]

I had this ailplane for about one year and it was great!! very reliable and tough!

[HeliMaster101]

how did you make the cool screw driver you should make a vid on how to make it please !!!

[Skydive4ever]

Great job on the review Dave, Nice night flying :-)

[ecsportscards17]

very nice plane, I love the design and the servos are already installed, easy.

[hermitcrabstuff34]

how much is it

[rdloco]

you D man dave!!

[livesteamtrains]

i give credit to nightflyer aka dave

[cruzader0]

go dave :D!!!

[urfate]

love what you did with the lights.

[f1adore]

nice video