XBox 360 RROD Fix : the oven method

[cacaribou]

17 000 people saw me scratching my balls. I can die happy.

[JamesBondHero]

ah... the french... they have such easy resolutions of stuff...

[KSardor1]

At 2:41 he scratches his penis :D

[juggalo60213]

i cant believe this shit worked i had like 5 360s with rrod and i got 3 of them working by per-heating my oven to 375 f degrees and putting my xbox in there for 10 min then letting it cool for about 45 min. thumbs up for making this vid. :D

[imprvrt]

so many languages so many countries we are still one in the hate of bill gates

[cpcheater1011]

why does the guy with the beard grab his balls, lol

[coldlmy1]

franchy guys with thier fransh xbox !!!!!!!!

u can just use a hummer !

[LimitlessAeon619]

Rofl, the last sentence at 1:00 made me lol

[highstona777]

Looks like roast xbox lol

[DassRullen55]

2:41 for epic moment =D

[ChaoticDragonStudios]

i did this method and did it all correctly, i even put triple layers of tape an tin foil but when cooking it in the oven, a few diodes blew up. is it still fixable? i REALLY need this xbox back because its jtag-able. could i buy more and re-solder them? please help me!

[MisterInnovation]

nice nut scratch for the camera

[blackninja10111]

I did mine for 9 minutes at 500 degrees farenheit, I insulated the outer edges (resistors, transistors etc.) with a towel and left the center exposed minus the heat syncs. reapplied thermal paste. did the penny trick, and voila. it worked

[jeffhardyiowa]

snaching balls at 2:40 :DD

[TheRsvideos123]

@jeffhardyiowa lol!!!



[titanfang]

If you had changed the temp to 356F (180C), removed the cage, heatsinks and all of the old thermal paste and had the board on a oven pan with 4 balls of foil on the corners keeping it up about a half inch from the pan, and did that... it would have lasted longer, the heatsinks took most of the heat away from the chips and the solder points (which need to melt back into place), but overall great vid

[irburnotice]

TROLOLOLOLOLOLOL OVEN WASNT EVEN ON ILL STICK MY DICK IN THERE AND SHOW U THE RESULT TROLOLOLOL

[Bitchtiki]

guy starts itchin his balls at 2:40

[bornwisedistruction]

ummm... inhale those cancerous fumes lolz!!!

[m4fka]

yea this is really good ,do i have to put any sesoning on it ,?

[powerkitemad]

120oC will not do the job properly. You should be looking at somewhere between 200-220oC ;)

[Timbojones0123]

your absauloute idiots you HAVE TO TAKE THe HEAT SINKS off and put foil on the Ur really lucky

[altonb93]

these guys are truly retarded "you are a pussy if you use towel trick" "real men put it in the oven"

[Mallorium]

@altonb93 Get a sense of humour =)

[yozas]

nice ball scratching 2:44

[yozas]

@yozas 2:40

[beauchristopher]

this is hilarious. you are a pussy if you use towel trick.. real mean put xbox in oven.. haha funny.. merci beaucoup

[Dre4dwolf]

Pre heat oven to 385, place xbox in for about 8 Min.

Let cool for 10 min

Put just a half drop of Arctic Silver 5 on the Gpu / Cpu Ditch the X clamps cause they blow and get some M5 8 Machine Screws and 2 washers on each side of screw.

Tighten till tight but not too tight.

.... xbox wont RROD again if you mod a fan into the system... use a 2" hole saw and drill a hole where the heatpipe is, get a 60 - 70mm fan and zip tie it to the thing... solder the red/black to the red black of the Rear fans.

[n3o1986]

something like 10 minutes...

but unfortunately after less than one month we've got back to the RROD...

this time we bought a new one...

[Yesitdid]

@n3o1986 BUY THE PS3!!!

[systemofadown158]

@Yesitdid no just no

[1996blue1996]

how long was it in the oven?

[RamyBoulet2]

J'adore Franz qui se touche les couilles vers la fin... Sinon, classe !