let me tell u guys a lil secret.. my dad owns a big auto motive company and when u have to use a wetsand paper makesure,u,add water so the crystals in the sand paper dont make ugly deep scrathes ... sand paper is 1000 grit or finegrit after make sure u atleast add a clear coat evenly and dont add alot in one spot ... posting a vid of my del soon hopefully u guys watch
I think you did a great job and it looks really good!! To the average person seeing the car from 3 feet away they would NEVER know there was even a problem.
@crcooktube paint the whole car not to expensive maybe 400 for paint and clear rent a room and a borrow a god gun and maybe rent a room to paint its usually 100 for the room so maybe 500,
I did that on my black Honda. The clearcoat rustoleum paint gets all gooey in the hot sun agh!! And dust sticks to it....still looks better than it did hahahha!
Nice vid! Im about to this job on civic, the top of car and the trunk lid are peeling. I took a razon blade to get that faded clear coat off. The paing underneath appears to be good. Where can I purchase clear coat at, what brand? Wish me luck and thank you.
My car has quite a bit of scratches on the hood and faded paint over 10 years id say about 1/3 of my hood needs to be painted. Would the best action be to sand down the whole hood with 400 grit sand paper, wipe it down, add a primer coat or 2, then use a spray can it a few coats?
just a little tip. you shouldnt start spraying while youre over the "canvas" in this case the canvas is the car.. when you start spraying in the middle of the canvas youll get bloches. you should start spraying on the newspaper.. spray evenly all the way across to the other side of the newspaper and dont stop sprayin till youre off the newspaper.. this ensures a nice even coat with no blotches.
Has anyone ever used penatral to shine up a car. Or to extend the paint.
I used it on a fiberglass red boat. Wipe on wipe off , VERY THIN COAT at begaining of season in Lake havasu AZ mid season did the same. Could do this for 3 seasons and it always shined like a cherry. When it got heavy or yelow after 3 summers I took easy off oven cleaner. Just sprayed water on and washed off penatral and oven cleaner, Very fast. Then just started all over again.
sand orange peel in work area flat with 1500 to start finishing with 2000 grit yourlooking for a uniformely dull finish with no orange peel once you have your glasssmooth dull clear surface go pickup some meguires utimate cuttin compound and a high speedhigh powr orbital buffer with the foam pad proceed to polish the whole car with the ultimate..... Your entire cars paint will look brand new thus blending into your work!!! hope you wearing a smile.... let me know how you made out!!! cheers
@TheIncredibleMrOz best advice to give someone is don't buy a red car. Buy a silver or white one, red paintwork fades can be trouble. I got a red car same one as this guy, although my paintwork is much better condtion
I am doing this with the stone chips on the bonnet of my del sol. I paid 15 dollars a can but I got the special paint match. There are a few spots on my del sol I need to touch up. Its nowhere near as bad as this..
was a bit of an improvement but I've got a lot to learn,lol. It would be so much easier I guess if my car wasn't white colored because now the spots I tried to fix are so much brighter than the rest of the car. Back to the drawing board for me,lol.
i painted the exact same way.on a corolla, although I just covered the window to not get paint on it. was an approvement,easy to do,cheap, and stopped peeling. its not flawless, but better than looking at it peeling all the time.good vid, thanks for sharing. p.s.1000grit is good
dawg i couldnt stop rockin to that backround music, ima see dem niggas in concert next month dis shit gone be crazy. ima be huffin dat spray shit u using n b gettin fuked up!!!!@@
why is almost every comment critical? that's a nice job. congrats crcooktube, it looks half descent and at least you like it and that's all that maters
the way he is sanding is making me cringe, wow, putting your fingers straight onto the paper puts swirls and etc in it, they make sanding blocks for a reason lol
Carry out the same treatment that guy did in the vid only this time use a primer not like he didnt which will lead to flaking,also it will cover chips in the suface.
hey man for ten bucks not bad..... i got a pretty nice cavalier i bought but the paint was chipping and rusting around the door and the bumpers and grill look like crap.... 20 bucks later it looks great!!!!... Every six months I touch it up but better then spending hundreds!!!
Got the exact same problem on my wife's '94 Del Sol. i've got some minor rust and recontouring to clean up in the same area as well. A good warm, calm day and you can get wonders done. Like it's been said before, make sure you keep the surface clean and all oils removed before you repaint/topcoat. A good buffer will really help top it all off.
No one should attempt this, If your clear coat is peeling, don't dry sand the surface. Use a sanding block and 2000 grit sandpaper. get auto painters tape and tape all around the area that isn't damaged. once it's all smooth and even use a degreaser to remove oils, waxes, and grease. Dry the area. use a touch up clear or rattle can clear high gloss. spray one light coat at a time hold can atleast 10 inches away. using a rubbing compound and polish buff and your done.
dont forget to clean off the paint after u sand it other wise it will look terrible.. im pretty sure it was kleened in this video and was cut out but just dont for get that good luck guys
Sweet. I have hopes on my 89 MR2. The paint is good the clear coat is badly shot. I'll tried your technique and see how it turns out. Cool video thanks for sharing with us.
wow.. i would have just left it. wait to get a real paint job how bout.. and only using that much masking on a windy day? yikes. plus maybe if you have better than a 1.0 megapixel camera we would be able to tell it looks like pure shit
what... no primer? I have also found that the better the prepping... the better the result.
This means using a fresh roll of quality brand name masking tape; and take the time to mask the most minute details. You will be glad you did. Generic brands of masking tape bleed under the tape and are not worth the savings. As much as body shops charge, you can save a bundle by doing it yourself.
He did a crappy job because he had $10 of respect for the job he was doing. He even says it in the video, if I don't do a good job I'll have to paint it anyway. This is why so many people do crappy jobs. If you take the time to prep it properly before you go shooting paint you can do an awesome job cheap. Cheap out on the prep and your cheap job will look like ass. Also never lay that much paint down at once or you'll get runs of solvent pop. You shouldn't paint in the sun either, makes it worse
where do some of you get your information from? I hope nobody pays you to paint anything for them. Clear coats are ALWAYS nice, to heck with the you don't have to if its a so and so paint... Even single stage urethanes with the clear built in should be clear coated. unless you are going for a cheap ass maaco style paintjob that scratches off with your fingernails you should always clear. This guys technique sucks, he did a quickie job because it was cheap and thats why many DIYers do shit jobs.
its been a while and it still looks better than before. I'm happy and that all that counts. and by the way my paint job compares to your joke telling -- Charles --
You're right, it does. As my joke telling had perhaps a minute or two of thought behind it before the actual delivery. The difference is I don't have the side of a can to read to tell a joke right. What annoys me is when people post bad information and a bunch of people are like ooh Im gonna do that too. When clear coat delaminates, it's separating from the basecoat. It will keep delaminating. So you going to do it right or just keep polishing a turd?
The whole just of this video is 10$ to do a temporary fix untill later !!!!!! then get the whole thing repaint by a pro What the point of your 20$ wine video
good god man so many things done wrong....ahh....for starters you sand in circles not straight lines...then you most def did not mask enough cause you got overspray all over your window. i pray to god you masked your mirror. looks good though ill give ya that
Bad spraying technique! i think you would have been best off leaving it be tbh, every time you press the nozzle the can spits, therfore you should start spraying before you pass the area to paint and release it just after the area to be painted inestead of keep pressing it and letting it go, also the prep is very important, very botched up tbh hey.
you should have takent the belt moulding off and then you could have got the source of why the clear probably started peeling to begin with. (most likely painted before with the moulding left on..)
watever u think ive painted cars and ive seen alot of this you did a fairly better job you could have buffed the paint first not sand papered it.. it woud have been smoother and the paint would have shined brighter
u buff with compound afer the 2nd clear coat is wet sanded agian with a block.... buffing compound is a fine grade of sand... good quick fix man. that would have costed alot at body shop lol but u did it with less then 10 bucks... better then 350 in premium clear coat
you should have been wet sanding and using something like a block to keep things flat. sand with just the paper and your hand will leave grooves in the paint.
so I have the same type of peeling happening on my hood and fender, how far down should I sand? enough to just get the clear coat off or a little of the paint underneath also?
i have the same 1992 blue i got whit it sins 2001 but it has 200.000 miles thos blue yukon are read becaus thers no blue yukon's any more alot of people have tell me that if i want too sell it but i dont wany to because is read and my uncle has the honda del sol do a video of the yukon
Yes that my Baby 1992 Yukon GT with 107000 original miles its two tone grey with a red yukon GT Stickers From your Youtube bane I bet you know all about them -- Charles -- Sadly last year Hail storm totaled it and I bought it back for 1500$ but it not mint anymore ---
Its doing well I just had to replace the coil but other than that no problems and it broke in the best place in my driveway so it did not strand me -- Charles
What did you do about the masking line were you taped it off or does it show bad?? if you really wanted an knew what you were doing you could sand the whole door with a 2000 or higher paper just lightly so was smooth but it didnt burn through then wax it an it would likly take out the masking line and make it shine like it was new
do you know of anything that can stop fading paint? i have a 95 del sol. and it has 3 very light strips. very light. and is fadin. u can only see it in direct sunlight. still has clear coat on it. i do have a can of clear coat tho. i that would help. but any advise would be awesome
It was Just Clear Top Coat from Walmart Auto Department -- The Key is if the paint Job look good when its wet then the top coat will make it look like it wet and shine. If it still looks bad when wet then it will not help..--Charles
Well, if nothing else you probably stopped any rust from forming there and prevented any further peeling. If you end up getting a professional to paint it - you outta get something wild on it like a sunburst finish (lighter on the front end and gradually blending into another darker color on the back). That would be kinda cool.
That would be nice If I get it repainted I think I will put on a body kit and spooler I've seen a lot on YouTube that really look Sharp!!!! Thanks for stoping by Charles
let me tell u guys a lil secret.. my dad owns a big auto motive company and when u have to use a wetsand paper makesure,u,add water so the crystals in the sand paper dont make ugly deep scrathes ... sand paper is 1000 grit or finegrit after make sure u atleast add a clear coat evenly and dont add alot in one spot ... posting a vid of my del soon hopefully u guys watch
MegaJbigg 1 month ago
@MegaJbigg Thanks for the info reply with a video when u get it done so we all can see it - Charles
crcooktube 1 month ago
It looks great man you did an awsome job, wet sand paper works good for that too.
SandyPantsFFS 4 months ago
Very good job, only thing I didnt like is the 1970 porn music!
9520G 7 months ago
80s porn music..lol
HughMungus2k9 8 months ago
what the fuck is this shit.. i think i've leaned alot more about people who drive a del sol
igetwasted 9 months ago
you soaked it with clear, how did it not run??
bigfry33 9 months ago
how about some masks and wet sanding it ?
lemo815 10 months ago
I think you did a great job and it looks really good!! To the average person seeing the car from 3 feet away they would NEVER know there was even a problem.
Great job!!
matt888444 1 year ago
@matt888444 Thanks for stopping by
crcooktube 1 year ago
haha thats actually really good man..might be a little ghetto but i like like it and as long as u like it too thats all that counts
one2mad2sk8r 1 year ago
@one2mad2sk8r Thanks for the Comment
crcooktube 1 year ago
haha agreed
gustavovelarde 1 year ago
some ghetto ass shit
broncturd18 1 year ago
ok i will say spoting in is ok. atleast he didnt paint the hole damn car with a rattle can like some dumb ass people.
woodzo40 1 year ago
but this is just temporary or it will never peel off again?
Neny0610 1 year ago
@Neny0610 Temporry Perminent its been Three Years and it has not peeled off yet
Has turned a liyyle Yellow but it still better than all thatr peel off. When i can afford it
I will get a complete new paint Job and Body Work to restore it but untill then I still happy with It -- Charles
crcooktube 1 year ago
@crcooktube paint the whole car not to expensive maybe 400 for paint and clear rent a room and a borrow a god gun and maybe rent a room to paint its usually 100 for the room so maybe 500,
mauiboypoi 1 year ago
@crcooktube so what are the exact tools to do it... you got sandpaper but what kind???... and what kid of clear coat spray did you use???....
Neny0610 7 months ago
@Neny0610 At the time you could get it at walmart it was called top coat in a blue spray can and the sandpaper was 800 to 1000 - Charles
crcooktube 7 months ago
WERE THE HELL DID YOU FILM THING IN A DAMN JAZZ JUNGLE???? LOL
kilodiamond 1 year ago
@kilodiamond I thing the birds were getting it on in the Tree next Door -- Charles
crcooktube 1 year ago
Nice voice! MMmmm.......
BarbieBillionaire 1 year ago
damn thats actually REALLY good
taboo422 1 year ago
I did that on my black Honda. The clearcoat rustoleum paint gets all gooey in the hot sun agh!! And dust sticks to it....still looks better than it did hahahha!
EricWaterTruck 1 year ago
Maybe i could hear if there was no music
hoth260 1 year ago
wow, nice work.
Gojiira 1 year ago
what is up witht hem freaky birds????
BHBS661 1 year ago
Nice vid! Im about to this job on civic, the top of car and the trunk lid are peeling. I took a razon blade to get that faded clear coat off. The paing underneath appears to be good. Where can I purchase clear coat at, what brand? Wish me luck and thank you.
Xcaret916 1 year ago
@Xcaret916 I got it at Walmart it was in the Car Section called top coat -- Charles
crcooktube 1 year ago
My car has quite a bit of scratches on the hood and faded paint over 10 years id say about 1/3 of my hood needs to be painted. Would the best action be to sand down the whole hood with 400 grit sand paper, wipe it down, add a primer coat or 2, then use a spray can it a few coats?
coofootube 1 year ago
IF the music was gone i could watch so much longer.
Igentenos 1 year ago
thats....gonna look horrible
ultimatefighterispro 1 year ago
just a little tip. you shouldnt start spraying while youre over the "canvas" in this case the canvas is the car.. when you start spraying in the middle of the canvas youll get bloches. you should start spraying on the newspaper.. spray evenly all the way across to the other side of the newspaper and dont stop sprayin till youre off the newspaper.. this ensures a nice even coat with no blotches.
hope this helped
burtleturtle123 1 year ago
Has anyone ever used penatral to shine up a car. Or to extend the paint.
I used it on a fiberglass red boat. Wipe on wipe off , VERY THIN COAT at begaining of season in Lake havasu AZ mid season did the same. Could do this for 3 seasons and it always shined like a cherry. When it got heavy or yelow after 3 summers I took easy off oven cleaner. Just sprayed water on and washed off penatral and oven cleaner, Very fast. Then just started all over again.
puma5744 1 year ago
you should have just painted the whole door it would look more even
pdlsuper7 1 year ago
sand orange peel in work area flat with 1500 to start finishing with 2000 grit yourlooking for a uniformely dull finish with no orange peel once you have your glasssmooth dull clear surface go pickup some meguires utimate cuttin compound and a high speedhigh powr orbital buffer with the foam pad proceed to polish the whole car with the ultimate..... Your entire cars paint will look brand new thus blending into your work!!! hope you wearing a smile.... let me know how you made out!!! cheers
sdfab 1 year ago
Porn music = win.
DannyCantShuffle 1 year ago
600 grit wet sand and clearcoat ur door.. let it dry.. buff ur car.. thats all u have to do..
TheIncredibleMrOz 1 year ago
Is it a 10 dollar paint job or a 10 dollar car :P
guyi2545 1 year ago
You bought $50 in newspaper; I guess you can't have your cake and eat it too. xD
Da1RiSiN1sMoKe 1 year ago
that looks great going to have to give this a try on my accord!
civicaccordhonda 1 year ago
What's with that bird?
oaky132x 1 year ago
se lija con un taco querido, y no se pinta al rayo del sol !!
gatillado09 2 years ago
Aren't you supposed to wet sand it? Thats what I did. The guy at the store told me to run the hose and wetsand it.
Cdogpyjamas 2 years ago 3
@Cdogpyjamas yea.. with 400 to 600 grit.. and the whole door too.. then u buff the whole car.. this guy is a first timer.. but he had a good idea
TheIncredibleMrOz 1 year ago
@TheIncredibleMrOz best advice to give someone is don't buy a red car. Buy a silver or white one, red paintwork fades can be trouble. I got a red car same one as this guy, although my paintwork is much better condtion
Cdogpyjamas 1 year ago
I am doing this with the stone chips on the bonnet of my del sol. I paid 15 dollars a can but I got the special paint match. There are a few spots on my del sol I need to touch up. Its nowhere near as bad as this..
Cdogpyjamas 2 years ago
nice
anjana123456789 2 years ago
sikkk nice job man
123asiasau 2 years ago
dont paint on sunshinn :(
tatayo07 2 years ago 2
one you were to close two you put way to much on for your first coat.
Gumbie2009 2 years ago
was a bit of an improvement but I've got a lot to learn,lol. It would be so much easier I guess if my car wasn't white colored because now the spots I tried to fix are so much brighter than the rest of the car. Back to the drawing board for me,lol.
sapher2020 2 years ago
Any improvement is better than none may be if you buff out the area around with rubbing compound and wax it it might even it out -- Charles
crcooktube 2 years ago
Thanks for the tip, I'll definitely give that a try and I'll let you know how it turned out. Thanks charles
sapher2020 2 years ago
@sapher2020 try workin with black lol everything shows, even when it rains my truck gets spots all over it.
DropDownLowrider 1 year ago
going to try this today on my cavalier. The clear coat is peeling like crazy on the hood and it just gets me crazy looking at it. Wish me luck,lol.
sapher2020 2 years ago
Good luck let us know how it turns out -- Charles
crcooktube 2 years ago
Having worked in an auto-parts store. this job is better than 90% of most people's touch-ups. good work.
etona66 2 years ago
i painted the exact same way.on a corolla, although I just covered the window to not get paint on it. was an approvement,easy to do,cheap, and stopped peeling. its not flawless, but better than looking at it peeling all the time.good vid, thanks for sharing. p.s.1000grit is good
crrazyy 2 years ago
Thanks for the comment -- Charles
crcooktube 2 years ago
dawg i couldnt stop rockin to that backround music, ima see dem niggas in concert next month dis shit gone be crazy. ima be huffin dat spray shit u using n b gettin fuked up!!!!@@
danig101 2 years ago
rofl i did this with my del sol too
supajakepanda 2 years ago
you wanna sell that car
dialtone777 2 years ago
Hi Thanks for the Comment.... How are the Kittens? -- Charles
crcooktube 2 years ago
you r one cheap messing cunt
leonpower35 2 years ago
this a joke lol.guys dont do this at home lol.only a professionial spraycan painter can do this lol
bigislandboy41 2 years ago
relaxing music...lOl i wanna make love too my girl with this song
saiintsliick 2 years ago 2
i dont think your blowup doll with like that
tec878 2 years ago
lmao nicee. but nahh u right my blowup doll wouldnt but ur mom would love 4 me too beat that pussy up with this track in the back round.
saiintsliick 2 years ago
LMAO Birdporn!
95concours 2 years ago 2
LOL! x2!
5spd5thgen 2 years ago
where did u get the paint?
allampedup88 2 years ago
Walmart
crcooktube 2 years ago
lol porn music xDD what's the name of the song? lolll
lilPat 2 years ago 2
I know it's from smart music but I need more info lol
lilPat 2 years ago
what is that noise in the background, i feel like this due has a bird porn on in the background
TalkToTheCold 2 years ago
This has been flagged as spam show
Wow. What a loser
Drewby230 2 years ago
thats a joke
ghostma13 2 years ago
you should use 40 grit sand papper for this oh it will look nice
ghostma13 2 years ago
looks far better then before
torpedo35 2 years ago
why is almost every comment critical? that's a nice job. congrats crcooktube, it looks half descent and at least you like it and that's all that maters
candle2k 2 years ago 12
Thanks for the Comment
crcooktube 2 years ago
Hahaha how good is the the porno music!
liri185 2 years ago 25
musics gays
cheapimpin 2 years ago
the way he is sanding is making me cringe, wow, putting your fingers straight onto the paper puts swirls and etc in it, they make sanding blocks for a reason lol
papaown 2 years ago
what can i do about paint peeling off?
TheTarrMan 2 years ago
Carry out the same treatment that guy did in the vid only this time use a primer not like he didnt which will lead to flaking,also it will cover chips in the suface.
citroeno 2 years ago
This comment has received too many negative votes show
you need to quit drinking or doing drugs.
tormozat 2 years ago
well,, i don't trust spray cans, anyway you like what you did.wear a mask next time.
vanbeckartworks 2 years ago
god job...but i think you make these paintjob at the wrong day..it was realy windy right?..a litle bit dangerus i think :)
housechris1990 2 years ago
hey man for ten bucks not bad..... i got a pretty nice cavalier i bought but the paint was chipping and rusting around the door and the bumpers and grill look like crap.... 20 bucks later it looks great!!!!... Every six months I touch it up but better then spending hundreds!!!
jradannarbor 3 years ago
Glad some one else has the same ideals as me just keep it going as long as possible!!!!! -- Charles
crcooktube 2 years ago
Why not just fix it once for all?
nordemoniac 2 years ago
Got the exact same problem on my wife's '94 Del Sol. i've got some minor rust and recontouring to clean up in the same area as well. A good warm, calm day and you can get wonders done. Like it's been said before, make sure you keep the surface clean and all oils removed before you repaint/topcoat. A good buffer will really help top it all off.
magick205 3 years ago
Good on you for having a go mate.
ispitanfart 3 years ago
No one should attempt this, If your clear coat is peeling, don't dry sand the surface. Use a sanding block and 2000 grit sandpaper. get auto painters tape and tape all around the area that isn't damaged. once it's all smooth and even use a degreaser to remove oils, waxes, and grease. Dry the area. use a touch up clear or rattle can clear high gloss. spray one light coat at a time hold can atleast 10 inches away. using a rubbing compound and polish buff and your done.
CryMoreToEazy 3 years ago
not too light, or it will have dry spray, one light tack coat first, two medium coats to finish.
UNHOLY916 2 years ago
dont forget to clean off the paint after u sand it other wise it will look terrible.. im pretty sure it was kleened in this video and was cut out but just dont for get that good luck guys
nottahat3rhotmail 3 years ago
Sweet. I have hopes on my 89 MR2. The paint is good the clear coat is badly shot. I'll tried your technique and see how it turns out. Cool video thanks for sharing with us.
Willtrax 3 years ago
yo DAT CAME OUT GOOD NOT BAD IMMA BOUT TO DO THAT TO MY CAR
gbaby566 3 years ago
Comment removed
jlafaive 3 years ago
thats pretty good.. the finish was actually nice.. thanks for this... this is usually useful for bumpers that are black coz its easier to paint..
ill try to apply it with my montero bumper hehe
jakemandoh 3 years ago
it doesn't even look that bad i think it came out good
ilovejuana 3 years ago
just because dont have money for professional paint job doesnt mean its not a paint job , its like saying poor people arent real people
seannopak25 3 years ago
wow.. i would have just left it. wait to get a real paint job how bout.. and only using that much masking on a windy day? yikes. plus maybe if you have better than a 1.0 megapixel camera we would be able to tell it looks like pure shit
hampsteracne 3 years ago
Missed the point don't have trhe money for a real paint job right now did this to get but until later it only cost me 10 bucks
-- Charles
crcooktube 3 years ago
hey not bad, I've seen alot worse :)
herbienbrian 3 years ago
why are you trying to make that ugly motherfucker look good
excaleber 3 years ago
what... no primer? I have also found that the better the prepping... the better the result.
This means using a fresh roll of quality brand name masking tape; and take the time to mask the most minute details. You will be glad you did. Generic brands of masking tape bleed under the tape and are not worth the savings. As much as body shops charge, you can save a bundle by doing it yourself.
srp960 3 years ago
good atemp mate if it looks better than before and your happy then thats all that counts. then you sell it 2 weeks later to someone else haha
djw117 3 years ago
This comment has received too many negative votes show
You FAIL at bodywork.
Sincerely, A Professional
dirksz24 3 years ago
ya I personally wouldnt use spraypaint on my del sol but thats just me. but ya any ways i guess it worked.
Nismo46920 3 years ago
He did a crappy job because he had $10 of respect for the job he was doing. He even says it in the video, if I don't do a good job I'll have to paint it anyway. This is why so many people do crappy jobs. If you take the time to prep it properly before you go shooting paint you can do an awesome job cheap. Cheap out on the prep and your cheap job will look like ass. Also never lay that much paint down at once or you'll get runs of solvent pop. You shouldn't paint in the sun either, makes it worse
captainp00pypants420 3 years ago
where do some of you get your information from? I hope nobody pays you to paint anything for them. Clear coats are ALWAYS nice, to heck with the you don't have to if its a so and so paint... Even single stage urethanes with the clear built in should be clear coated. unless you are going for a cheap ass maaco style paintjob that scratches off with your fingernails you should always clear. This guys technique sucks, he did a quickie job because it was cheap and thats why many DIYers do shit jobs.
captainp00pypants420 3 years ago
its been a while and it still looks better than before. I'm happy and that all that counts. and by the way my paint job compares to your joke telling -- Charles --
crcooktube 3 years ago
You're right, it does. As my joke telling had perhaps a minute or two of thought behind it before the actual delivery. The difference is I don't have the side of a can to read to tell a joke right. What annoys me is when people post bad information and a bunch of people are like ooh Im gonna do that too. When clear coat delaminates, it's separating from the basecoat. It will keep delaminating. So you going to do it right or just keep polishing a turd?
captainp00pypants420 3 years ago
The whole just of this video is 10$ to do a temporary fix untill later !!!!!! then get the whole thing repaint by a pro What the point of your 20$ wine video
crcooktube 3 years ago
stupid ass
RoyCoST 3 years ago
why tape off the body of the car its a clear coat!
ramonsuave1461 3 years ago
you should have used the FORWORDING button
elibaba7 3 years ago
were can you buy clear coat at?
henloy 3 years ago
Same thing happened to my friend Jamie's Del Slo.
rockerdude29 3 years ago
what's with the 80's porn music?
d3v07 3 years ago 5
the car is base coat, but he is spray solid colour. so no clear needed.
digiral11d 3 years ago
i'm a spray painter, it's not base coat so it won't set flat. it's a solid colour, anyway who cares.
digiral11d 3 years ago
good god man so many things done wrong....ahh....for starters you sand in circles not straight lines...then you most def did not mask enough cause you got overspray all over your window. i pray to god you masked your mirror. looks good though ill give ya that
gmaxking15 3 years ago
well it looks better eh. i prob would have done the hole door but any way 80% better
bjjxr8 3 years ago
Bad spraying technique! i think you would have been best off leaving it be tbh, every time you press the nozzle the can spits, therfore you should start spraying before you pass the area to paint and release it just after the area to be painted inestead of keep pressing it and letting it go, also the prep is very important, very botched up tbh hey.
supernovadw 3 years ago
you should have takent the belt moulding off and then you could have got the source of why the clear probably started peeling to begin with. (most likely painted before with the moulding left on..)
toddrudolph 3 years ago
hey man good for you, atleast you tried it and it looks better than b4.
98navihater 3 years ago
watever u think ive painted cars and ive seen alot of this you did a fairly better job you could have buffed the paint first not sand papered it.. it woud have been smoother and the paint would have shined brighter
trillakilla 3 years ago
u buff with compound afer the 2nd clear coat is wet sanded agian with a block.... buffing compound is a fine grade of sand... good quick fix man. that would have costed alot at body shop lol but u did it with less then 10 bucks... better then 350 in premium clear coat
x5t0rMx 3 years ago
well it does look good but does it really lools good
isayrawr98 3 years ago
Well it looks better than it did but is it really better than it was -- Charles
crcooktube 3 years ago
you don't need clear. it's not metallic. haha best 10 bucks you've ever spent.
digiral11d 3 years ago
when its a wave color he needs a clear coat!
bereal2012 3 years ago
dude unless your going for a flat look you always need clear and even then its a good thing to have for paint protection
gmaxking15 3 years ago
you should have been wet sanding and using something like a block to keep things flat. sand with just the paper and your hand will leave grooves in the paint.
IDBNVS2 3 years ago
how has it held up?
therealspanky34 3 years ago
so I have the same type of peeling happening on my hood and fender, how far down should I sand? enough to just get the clear coat off or a little of the paint underneath also?
s7carlover 3 years ago
You want to get ultra fine sand paper and sand just the clear coat, dont go into the base paint layer.
kevine17 3 years ago
just get clear coat and littel glaze if u go to much do 1500 wet sand !
HOBBYMAN93 3 years ago
i have the same 1992 blue i got whit it sins 2001 but it has 200.000 miles thos blue yukon are read becaus thers no blue yukon's any more alot of people have tell me that if i want too sell it but i dont wany to because is read and my uncle has the honda del sol do a video of the yukon
GMCYukon92 3 years ago
is that truck on the back is a blue yukon
GMCYukon92 3 years ago
Yes that my Baby 1992 Yukon GT with 107000 original miles its two tone grey with a red yukon GT Stickers From your Youtube bane I bet you know all about them -- Charles -- Sadly last year Hail storm totaled it and I bought it back for 1500$ but it not mint anymore ---
crcooktube 3 years ago
nice, I should have thought of that before taking mines into Maaco's cheap ass. They suck.
You got some good results on that 10 dollar job man. Props to you.
jmua6 3 years ago
hm, yes poor del sols and there sun damage!
I have a little bit on mine, not enough to want to get fixed yet lol.
Its on the metal part above the windshield.
atomicpuppet 3 years ago
This comment has received too many negative votes show
what the fuk is wrong with your neck, you got cancer or somthing?
skatepunk2242 3 years ago
No I guess it the light shining on my Fat Neck!!! - Charles - Looks kind of Bad doesn't I have watch this video and never noticed that before
crcooktube 3 years ago
this is a good video i think i might be geting a del sol in the sumer so yeah how is yours holding up
Weisty 4 years ago
Its doing well I just had to replace the coil but other than that no problems and it broke in the best place in my driveway so it did not strand me -- Charles
crcooktube 4 years ago
he should have taking it to tj where the park is jajaja they fixed cars like for 10dlls ajaja
remord 4 years ago
What did you do about the masking line were you taped it off or does it show bad?? if you really wanted an knew what you were doing you could sand the whole door with a 2000 or higher paper just lightly so was smooth but it didnt burn through then wax it an it would likly take out the masking line and make it shine like it was new
popescope18 4 years ago
do you know of anything that can stop fading paint? i have a 95 del sol. and it has 3 very light strips. very light. and is fadin. u can only see it in direct sunlight. still has clear coat on it. i do have a can of clear coat tho. i that would help. but any advise would be awesome
typeR1989 4 years ago
this is a great video...its great to see a how to once in a while...rather than just seeing someones speedometer.
bb5308 4 years ago 3
Thanks for stopping by and commenting.. So far the paints still ok hasen't peeled off -- Charles
crcooktube 4 years ago
What paint was used? My del Sol has those symptoms you had on your door, ALL over the targa top. And its also Milano Red like yours.
mitosis123 4 years ago
It was Just Clear Top Coat from Walmart Auto Department -- The Key is if the paint Job look good when its wet then the top coat will make it look like it wet and shine. If it still looks bad when wet then it will not help..--Charles
crcooktube 4 years ago
Thanks for the video. It's very useful. Could you tell me the size of sandpaper you used?
leedstao 4 years ago
I used wet/dry 1200 and 2000 to finish
Thanks for stoping by
crcooktube 4 years ago
I would have cut some corners to save some money ..jk it looks very nice.
jdmpassword08 4 years ago 2
awsome ... well spent 10 Dollars
hamilton2008 4 years ago
Thanks for stoping by time will tell on how long it will last
crcooktube 4 years ago
looks good for a cheap fix!!!
pinchetejano01 4 years ago
Thanks anything was better than the peeling clear coat and it even made my mirrors look better
crcooktube 4 years ago
Well, if nothing else you probably stopped any rust from forming there and prevented any further peeling. If you end up getting a professional to paint it - you outta get something wild on it like a sunburst finish (lighter on the front end and gradually blending into another darker color on the back). That would be kinda cool.
MyRealityBytes 4 years ago
That would be nice If I get it repainted I think I will put on a body kit and spooler I've seen a lot on YouTube that really look Sharp!!!! Thanks for stoping by Charles
crcooktube 4 years ago