[HD] Coolermaster HAF X Build

[Mrhalofan1996]

does any one know if i would still able to fit any of top 200mm fans (original)  or slim fans

thanks

[xCALLLmeCLUTCHx]

Where are your front panel headers? USB and audio

[wizzkid37]

I have this case, the only thing im not happy about is , when installing the Graphics card (XFX ATI 4890) the backpanel holes did not line up properly, so i had to push the rear of the case inwards a little to line up the 2 screws to secure the card!

Did you have this issue??

[wizzkid37]

Did the graphics card screw in ok ? I had to push the rear of the case inwards a little for the holes to line up for the PCI backplate.

[mainenwo]

@RKOver17 no usb headers hooked up?

[h272705335]

hi, how is the overall cooling performance when its fully loaded?

for the setup on the top, r u still using stock 200mm or replaced with 120mm fans?

is the raditor xspc rx 360?

[dOcrOckchetOng]

u use megalodon hv a problem or not..bcoz mine hv not working on  board usb. they hv work on hub usb. why?..pls tell me a info. tq

[SICKNESSstunting]

Nice word mate :) pretty good cabel managment

[RKOver17]

@SICKNESSstunting Thanks and I wish I had waited for the RAM and Coolermaster fan before recording this but ah well. All in description.

[marduk505]

very clean, looks good

[RKOver17]

@marduk505 I try my best :)

[1wigi]

Thanks :)

[1wigi]

Nice setup man! I am planning to buy this case and i see that you have a corsair hx power supply and i was wondering did you need any extension cables for it? Please respond !!! :)

[RKOver17]

@1wigi No mate.

[SN1P4MONK1]

sweet

[DamonWolf2392]

Hey, what radiator do you have installed? i cant hear what it is unfortunately, but i have a haf x case and i wish ti buy a triple radiator unit, help with this is greatly appreciated, thanks!

[RKOver17]

@DamonWolf2392 it's a Hardware Labs Black Ice® GT Xtreme 360mm

[KTCRITCH]

I have set of Megalodons myself, 100% worth the cash!

[DutchFreezeR]

Hi, i have a HAF X and im planning on buying a dual rad setup. But can you also put the rad on top of the mounting spot(so it replaces the rop fan(s).

And another question, du u use a fancontroller?

Thx in advance ofc.

[badboycarlos]

nice build but you shouldnt of replaced the lian li pc p80, watch my latest video im starting my build with the lian li and it will be powdercoated matt black

[RKOver17]

@badboycarlos I did regret it a little bit but I bought the HAF X because I wasn't keen on the radiator mounted externally. I want everything inside.

[badboycarlos]

@RKOver17 i got two triple rads inside my lian li pc p80 all internal

[ixy1987]

i have this case i am having problems screwing and unscrewing the fan as i dont have a screwdriver thin enough to go through one hole of the fan to reach another, please help ! which screwdriver did you use to reach the tight mounting hole ????

plz reply

[RKOver17]

@ixy1987 You'll have to explain yourself a bit more, which fan?

[ixy1987]

@RKOver17 the top stock fan....i tried to remove it but my screwdriver wouldn't reach the tight compact area to the screws...i was wondering whether you used specialised tool to reach the compact area ??...idk whether i need a flexible screwdriver or something....?

[mastermindzh]

@ixy1987 I used a special stanley small screwdriver.

[bvestationfan]

u like GTA? me too!

[RKOver17]

@bvestationfan Love the games, yeah.

[riddks1]

Quick question, I have the Haf X and i'm mounting a 360mm rad with 3 120mm fans. I was wondering what the order of mounting it would be. Is it Top of Case-->360rad-->3 120mm fans OR Top of Case-->3 120 fans-->360mm rad?

Second question: Should I have the 3 120mm fans on Intake or Exhaust?

[ixy1987]

i jus bought my corsair hx750 psu for my new build i tried to connect the psu to my LED fans to test the fans without any other peripheral connected but i couldn't get the LED fan to work...do i need to have a motherboard connected in order to get the fans to work ???

[Eclipezz]

Hi, what kind of tubing is that ?

[jaiwalka]

where did you put the reservoir?

[sundown798]

Hey fantastic build man. Im getting this case soon in the mail and would love a look at the other side for my cable management. Thanks for posting this!

[PusterPL]

Du you have the fans on the radiator taking air in from the outside or from the inside blowing out? :)

[legend98jasmeet]

how many watt psu?

[EMILKIHLSTRM]

@legend98jasmeet 1000w

[1337Buylken]

Thats one nice piece of art :) Congrats for you my friend ;)

[1337Buylken]

Well thats some nice english :P

[EliteComputerBuilds]

Very clean build, looks amazing. I am getting this case soon. Subscribed.

[MissileMoose]

Subscribed for more videos. :)

I'm planning an AMD/ATI build in the HAF X soon.

[damiengiles1]

Did you have any trouble with stretching the two CPU power cables from the top left, through the cable managment holes above the motherboard, behind the radiator, down the back of the case and in the coolermaster PSU sheild into the PSU? I couldn't mount mine that way so hoping corsair will send me a longer cable!

[peteyesco]

What cooling system is that? Link please?

[JoeyStormz]

nice rig man im going to be building mine in a week.

[RKOver17]

@JoeyStormz same case?

[JoeyStormz]

@RKOver17 yes i am getting the haf x

[kyle7412]

VERY CLEAN BUILD

[adam411114]

how did you mount that triple rad on the top? does the case come with a bracket for using a triple rad?

[RKOver17]

@adam411114 Remove the top fan then use the screws with the fan to hold rad up top then fans on the rad with screws as normal then done.

[fixx373]

Nice rig. Looks great. I just purchased this case today myself to replace my haf 932 because i like the haf x better.

[NoxeN2008]

Very nice computer RKOver17... good job man i really like that case. i have the HAF 932 all black inside and red lights

[RKOver17]

@NoxeN2008 I replaced the rear fan for a Coolermaster Sickleflow red LED 120mm.

[GenericName007]

Would like this case slightly more if the top 200mm fan was also LED, I plan to get another 200mm to go up there and want to get red LED but it would look a bit odd with only the one being LED. Don't really want to buy 2 red LED fans just so i can replace the one that comes with it, then have an extra that I'm sure I'll never use.

[RickArter]

Nice rig!

[HGTtec]

what mobo do u have?

[RKOver17]

@HGTtec Rampage II Extreme.

[voxmagna2]

nice work..  thanks needed to know if a triple fan radiator could fit at the top

[barbaros4ever]

Thanks a lot for your help man you have just made cm to sell another haf x :P

[barbaros4ever]

is the backplate hole biger than the 932's to allow to change at the rampage ii extreme the cpu cooler without take it out?????

[RKOver17]

@barbaros4ever yes.

[barbaros4ever]

no i mean.. because i have the HX1000 i know than every wire is very hard made and all the connectors are very tight..how did you manage to take every wire out of every molex etc without damaging it??? thanks for the reply ... and something more.... my new pc has the rampage ii extreme like you the hx1000 kai 3 gtx275 will the fit in the haf x??? because i want to buy it for the extra expantion slots that the haf 932 does not have and my 3rd gtx sends all the hot air inside my case

[RKOver17]

@barbaros4ever HAF X is capable of 4 way SLI.

[grpace]

Looks good.

[barbaros4ever]

how did you made all of the corsair 1000 cables sleeved??? sorry for my english i dont know if sleeved is the right word to say it.....

[RKOver17]

@barbaros4ever sleeved them myself.

[TylertheGeek28]

looks good Jason, nice work. lol at other peoples comments about the front panel connectors all I have connected is my usb.. anyways looks good

[WestCoastMods]

Looks good, but IMO I am not a big fan of this case. Also why don't hook up the front panel USB, Firewire and HD audio? And with everything else being sleeved what happen to the pwr/reset/HDD activity cables....?

And finally not that it's a big deal, but again in my opinion you should lower the HDD closer to the bottom of the cage, where it is cooler.

Cheers

LazyMan

[RKOver17]

@WestCoastMods You and your complaints haha. I do have some black sleeving and heatshrink but I kinda ordered some a tad too large. I WILL sleeve them black very soon.

[WestCoastMods]

@RKOver17 Sorry bro, I see

[zearsenalboy]

Why replace the ram not just adding more to it?

[RKOver17]

@zearsenalboy I want the best as possible in terms of speed.

[TehRamen]

Where are all the front panel connections?

[RKOver17]

@TehRamen I don't plug in e-SATA, firewire and USB simply because I don't use e-SATA and firewire at all and I use the USB's on the board.

[LH787]

well done.

but in my opinion the silverstone temjin 07 is best case ever!

[laservader1]

@LH787 its gettin old now tho

[LH787]

@laservader1

why?

[laservader1]

@LH787 less holes for cables unpainted insides no hotswap ect

[RKOver17]

@LH787 I have that case also but in my wardrobe. I keep my PC gear in there.

[Moreb0]

looking nice and neat. well done!

moreb0