Belt CP Fuseado Jet Ranger

[mgrande11]

I realized that now that I've been flying for awhile.

[Unboltedsteak]

the wobble could also be caused by a bent spindle/feathering shaft i have expereinced this before and after replaceing the feathering shaft it was a non issue

[Trentaur]

in this video , i noticed that the blades werent perfectly in track, try to trace the paddles as it revs up. you will see it then .

[mgrande11]

I noticed a shutter and shimmy when you spooled up, my belt cp also does this. If I quickly bring up the throttle to 50% it doesn't, does anyone know why?

[Trentaur]

if it happens at a certain speed, then i would suspect a slight bend at the mainshaft, and thats a baaad thing! while its unoticable at higher rpm. Please take of the shaft and place it on a flat surface like glastable, with perfectly smoothsurface. Roll it, if it makes a tiniest wobbly sound then its bend..if it rolls with same "tune" then its not bend. Tighten all connections with mainshaft and recheck the pushrods lengths. Good luck and keep flying!

[Trentaur]

Also, the reason why it stops vibrating at higher speed is that since the gforces becomes greater at higher RPM it counteracts on the vibration that was first caused by either a bend shaft or blades/paddles that are out of track...this would be noticeble if it where out of track by greather than 1mm..

[bar4nda]

You must be check the main shaft, maybe have some crash and this occasion vibration after a coup and is bent

[bar4nda]

Thanks, already buy a Trex 500 and this sound it´s more realistic, greetings

[CDLEGO]

it sound good

[andersen95]

where did you buy this?

[bar4nda]

I buy this, direct by Hong Kong

[andersen95]

the bottom looks closed off how to you get at the battery? is the front and back 2 pieces and you take the front off to work on it

[bar4nda]

Yes, the fuse it´s in 3 pices total, one for the tail rotor, another for the main rotor and the last for the front that you can remove with some screws and chaing the battery.

[ice9fetus81]

i think your tail rotor is more vulnerable to ground strike...

[bar4nda]

I don´t understand...

[ice9fetus81]

i mean the tail blade might hit the ground?

[bar4nda]

May be but i still have no problem with that.

[sdrfgvrfgvsfravgdsvS]

holy shit

[osc8]

Awesome video! I am about to install E-Sky jet ranger scale body to my belt-cp.. i am a bit worried about the center of gravity though, how did your belt-cp balance out when you put the body on? More difficult to fly?

[bar4nda]

Was a bit difficult because I had to move the battery and speed control more forward, not to add more weight and that resolved the problem, regards!

[spader699]

i meant when it was startin up

[bar4nda]

Yes, It was a little shake, like a dog after the shower, jejeje.

[spader699]

ur helis got the heebadabajeebys he he

[gatoconbotas18]

Esta excelente el heli, que fuselaje mas padrisimo solo le faltan unas luces. :)

[bar4nda]

Muchas gracias, el fuselaje es el original del Belt CP con un poco de pintura extra, son muy buena opcion las luces, solo espero conseguir algo de plata para poder comprarle algo bueno, Saludos!