that back bumper looks a bit ricey imo. to put it subtly that is. DOesnt look good on any car and certainly shouldnt on a mini, but to each his own anyway
I'm using a red top pump but I have been told that an upgraded mechanical fuel pump would be better. I don't know how true this is. A supercharger kit will make lots of difference to a 1275.
thiking about supercharging my 1275 mini, did you do much to the fueling as obviously will need more fuel im looking at a supercharger kit says nothing about fuel bit worried lol, you think it will make much difference to a 1275 ??
You don't have to use an inter-cooler but I think it would make a massive difference to the power and drive-ability as the charger does get very hot. If I had more time I'd fit one, it can be done but it's not easy squeezing anything else in the tiny engine bay.
A smidgeon retarded on the rapid throttle opening? Its like the ignition timing in not advancing rapidly enough? I duuno, Its years since I been in the performance biz. I think I have lost my ear.
well done, it was a little retarded. this was first run though, it's running pretty good now although the set-up isn't ideal. Really it needs fuel injection but can't afford to do it.
No, the charger is standard. obviously you need the manifold to make it fit, I bought mine as a kit but to be honest I'd make my own if I did it again as I ended up remaking most of the kit anyway.
it's about 130 bhp at the moment but I'm going to have a good look at the engine next year as I don't think that is quite what it should be producing, plus the clutch is slipping. I had an original cooper for three years but wanted to go for something different this time.
Cool, have you thought about a different engine like a motorbike engine or something?? maybe an R1 or GSX-R, or hayabusa engine, that would be insane!! :D What sort of work have you done to make 130whp?
Hi, I'm using the supercharger from the new mini on my a series. It is quite simple to fit but you will have to make a custom inlet manifold aswell as a few other engine mods.
i duno if it true if you no please message me back supercharge of the new mini fits a series block ? what i bin told thinking of putting supercharger on my austin a35 van please let me no if supercharger of new mini fits
whooaaa! exhaust gave me goose bumps! nice! We got an MG B GT it has a 5 main bearring engine and dual carbs stock so it should be fast... we have lots of work though. We were thinking of putting on a similar s/c later down the road... But nice mini.... 5 stars!
Thanks, really happy with it now I've sorted the bugs out. The eaton charger is ok for the more classic look but if I did it again i'd use a rotrex. you'll have to get some vids of the MG up.
Will do when its video worthy, but if you want to see it, i will put up a video of it now in current condition. we got it only last december well it was a christmas present from my padre lol, best gift ever lol
Can't believe you are still running a servo, good work. Ive struggled to install mine with just the mastercylinder in place. Wish I have gone for a flip front! Sounds great, do you have a reduced pulley?
Yeah was a real squeeze, had to do away with the air intake that came with the kit to get it to miss everything, a flip front would have made it all alot easier. Still got the standard 10psi pulley, might change later though
that back bumper looks a bit ricey imo. to put it subtly that is. DOesnt look good on any car and certainly shouldnt on a mini, but to each his own anyway
artakisthebest 1 week ago
what sorta cam you running in this?? also what power figures are you achieving??? :)
Marrrk666 2 weeks ago
why make the back look like an rx8?
grandmaSmellsofFarts 7 months ago
room?
tradesmansassistant 10 months ago
lol, not much.
minigeorge666 10 months ago
I'm using a red top pump but I have been told that an upgraded mechanical fuel pump would be better. I don't know how true this is. A supercharger kit will make lots of difference to a 1275.
minigeorge666 1 year ago
thiking about supercharging my 1275 mini, did you do much to the fueling as obviously will need more fuel im looking at a supercharger kit says nothing about fuel bit worried lol, you think it will make much difference to a 1275 ??
rs200000000000 1 year ago
love the exhaust ; o
chickitakoowan 1 year ago
nice =D what sort of power figures you looking at??
Marrrk666 1 year ago
WHY that stupid exhasust? WHY that stupid bumper? ruined a good mini
LIP15 1 year ago
do you have to use an intercooler in the eaton E45? the bini uses one, but its dealing with another scale of power, and so eat also.
RicardoR5 1 year ago
You don't have to use an inter-cooler but I think it would make a massive difference to the power and drive-ability as the charger does get very hot. If I had more time I'd fit one, it can be done but it's not easy squeezing anything else in the tiny engine bay.
minigeorge666 1 year ago
A smidgeon retarded on the rapid throttle opening? Its like the ignition timing in not advancing rapidly enough? I duuno, Its years since I been in the performance biz. I think I have lost my ear.
breebw 1 year ago
well done, it was a little retarded. this was first run though, it's running pretty good now although the set-up isn't ideal. Really it needs fuel injection but can't afford to do it.
minigeorge666 1 year ago
Whats the 0-60 time on that ? :)
Finlayenzo 1 year ago
Hi, not sure as the clutch does slip a bit and to be honest I haven't been brave enough to try it yet but it does shift :)
minigeorge666 1 year ago
@minigeorge666 Aw haha :D :L
Ive set some cash aside for a kit for my 1275gt :D
Finlayenzo 1 year ago
This has been flagged as spam show
@minigeorge666 Aw haha :D :L
Ive set some cash aside for a kit for my 1275gt :D
Finlayenzo 1 year ago
what kind of super charger are you running?
SignalLongboards 2 years ago
It's the eaton E45 charger from the new mini
minigeorge666 2 years ago
lol, good job, did you use anything special to convert it? or just bolt it on there??
SignalLongboards 2 years ago
No, the charger is standard. obviously you need the manifold to make it fit, I bought mine as a kit but to be honest I'd make my own if I did it again as I ended up remaking most of the kit anyway.
minigeorge666 1 year ago
thankyou, for the info.
SignalLongboards 1 year ago
OH MY GOD.... that sounds too good lol
UkDiamonds 2 years ago
Nice!
Tippeefewt 2 years ago
Cheers.
minigeorge666 2 years ago
Cool, what whp is it? don't like the rear end (keep it original looking)
TimZZR2 2 years ago
it's about 130 bhp at the moment but I'm going to have a good look at the engine next year as I don't think that is quite what it should be producing, plus the clutch is slipping. I had an original cooper for three years but wanted to go for something different this time.
minigeorge666 2 years ago
Cool, have you thought about a different engine like a motorbike engine or something?? maybe an R1 or GSX-R, or hayabusa engine, that would be insane!! :D What sort of work have you done to make 130whp?
TimZZR2 2 years ago
wooahh! i wanna see that running! sounds awsome!
zxbcx 2 years ago
it is running
you must mean driving :p
WRLondon 2 years ago
asa face si o dacie cand o accelerezi cam tot sunetu asta
romanu777 2 years ago
adevarat
Danwerty1 2 years ago
loveing the engine, hating the body kit
strapamotortoit 2 years ago
nice colour.....shit brown
novanerved 2 years ago
it's called PRIMER, the stuff that goes on before the colour?
minigeorge666 2 years ago
Im guessing thats the undercoat, the light fitting etc werent there because its going to be painted.
FreeZey78 2 years ago
Hi, I'm using the supercharger from the new mini on my a series. It is quite simple to fit but you will have to make a custom inlet manifold aswell as a few other engine mods.
minigeorge666 2 years ago
i duno if it true if you no please message me back supercharge of the new mini fits a series block ? what i bin told thinking of putting supercharger on my austin a35 van please let me no if supercharger of new mini fits
austina35lad 2 years ago
oh jesus, thats sweet
lyleattack 2 years ago
whooaaa! exhaust gave me goose bumps! nice! We got an MG B GT it has a 5 main bearring engine and dual carbs stock so it should be fast... we have lots of work though. We were thinking of putting on a similar s/c later down the road... But nice mini.... 5 stars!
QSideProductions 2 years ago
Thanks, really happy with it now I've sorted the bugs out. The eaton charger is ok for the more classic look but if I did it again i'd use a rotrex. you'll have to get some vids of the MG up.
minigeorge666 2 years ago
Will do when its video worthy, but if you want to see it, i will put up a video of it now in current condition. we got it only last december well it was a christmas present from my padre lol, best gift ever lol
QSideProductions 2 years ago
Hell what a tight fit, there isn't much room to begin with. The distinctive sound of the siamese ports.
EnigmaNZ1 3 years ago
tht exhaust sound freakin awesome
bikerdude96 3 years ago
Thanks, going on the rolling road on monday for some fine tuning, I'll try and get a vid of it on the rollers.
minigeorge666 3 years ago
sounds lie a monster awesome car
bikerdude96 3 years ago
looks like the vxr corsa new exhaust . love it!
koxxxtp12 3 years ago
Cheers, that's where I got the idea.
minigeorge666 3 years ago
Can't believe you are still running a servo, good work. Ive struggled to install mine with just the mastercylinder in place. Wish I have gone for a flip front! Sounds great, do you have a reduced pulley?
hornetob 3 years ago
Yeah was a real squeeze, had to do away with the air intake that came with the kit to get it to miss everything, a flip front would have made it all alot easier. Still got the standard 10psi pulley, might change later though
minigeorge666 3 years ago
Cheers. Yeah, I modded the zeemax kit to take a triangle exhaust then had a firm make me a new tip.
minigeorge666 3 years ago