@SonicGirl10219 start off small like i would recommend a blade mcx2. when you get good at that then may be if you have your orientations down then an blade MCPX. it has the flybarless unit which will be good for beginners. The M stand for Micro, C=collective P=pitch, X=flybarless.
I am eying this heli to replace a Belt CP V2 that is having difficulties. I run nitro cars and know my way around nitro engines, though I have a few questions.
-What does the transmitter support? Throttle Hold? Flight modes? Dual Rates? Model memory?
-Does the heli come with a governor? If not, can one be added easily?
i get my new walkera hm 83 next week, i made a very good deal i payed 150$ for a brand new walkera hm83. im very exciting to fly it and i hope everything is allright because its not easy to get new parts... greez from switzerland
hi, id like to buy this helli and i have some questions,when u buy this product from xheli,do u get some fuel? how much is the fuel? about the starter do u get 1 when u buy this product
hey Hubia for your first question, you dont get fuel for the heli. it will cost you about $ 20 a liter. you can go to your local hobby store and buy the starter kit. This is VERY NICE heli. thumbs up for walkera
I have a Walkera 2801 Pro radio system being used with a Storm 450 carbon edition heli. I am new to this hobby but should soon be ready to try a little 3-D flight. I love the heli but for some reason I am not getting negative pitch in throttle hold position when I have the heli in ST 1 or ST 2. Should I adjust the pull rods so I get more negative pitch and go back and re adjust the NORM position as to only get -1 to -2 pitch or should this be handled with the radio?
@xhelicopter hi, i have a wk 2801 and a rx 2801. can the reciever handle 5.8 volts because i want to use it in my trex 600 nitro. what is the setup for the walkera 83 heli? does it have a 7.4v battery and then a regulator what converts it to 5.8 volts. PLEASE HELP.
@ravijagdev I currently have a Hot Bodies 1/8 buggy and a Traxxas Rustler both with fantom engines, I'm just getting into Helis and Electric have been good, don't want to fidle with nitro for the moment :) but gotta love the smell of nitro in the morning!
@Datucky yes! nothing can beat the smell of nitro. in helis its kida different to cars. i have a kyosho FW-05 T with a gxr 15 engine. it goes 73km/h on a 120m straight track. im using 16% at the moment. i dont want to go to 20 coz my friend blew up his engine. are the phantom engine any good and whats the price for them usually?
@ravijagdev The fantom are nothing but greatnes, my Rustler was smoking any other rustler, I´m using 16% too, I believe 20% would be too much, maybe in the .21 in the buggy, but I don't want to have 2 different gallons. I bought them quite a while ago, and got 2 reapair kits. around 130 US
@ravijagdev switch to ELECTRIC. i used to have a nitro 600 and then i switched to a electric T-rex 550e 3g. And what a difference. a touch cheaper too. may be not on a 700 though.
Hi, how long time it can fly by it's full Fuel tank, And also please tell me where can I buy It? Can i get at SINGAPOOR? How much price is it??? :) Thanks!!!
hi i have a walkera 60b and i am wondering is this more mernuverable and powerfull than my 60b with brushless system and is this beter in anyway than my 60b
Also the fuel filter is designed to go on in the other direction. That's so when you fill the tank dirt can't come from your fuel can and set in the clear chamber because that end won't be filtered before the carb... I just bought one of those filters and noticed it..
Sadly, it's a sample helicopter and we will not be carrying this product so there won't be parts for it. We make videos of everything just to satisfy our fans, even if we don't carry the products.
what are the odds of xheli selling this model? and what would pricing and parts be like. I would like to get in to nitro but the $ to fix a larger heli keeps me away. the exi 450 parts are cheep as dirt so I am not afraid to try new things. I have bin flying for 6 months and am kind of getting tired of charging lipos . if the price is right I would buy this heli when available.
wow, coincidence indeed. haha Just to be fair the video was finished before the weekend and uploaded on Monday. So no chance for us to take the music. Great video by the way
Nice flying Tony.That's a nice looking Heli and radio.Your missing a screw out of the gyro.X-Heli needs to carry the full line of Walkera and ESky helicopters .They just might rule the cybercopter world then.Also carry some aftermarket hop ups.
Yeah, ours was a sample model so it didnt't came with a screw. I'm surprised that you noticed that. Xheli will eventually carry a majority of those brands but until then we just have to make due. Thanks for the comment Jauchiu
where do you buy the nitro?
Mrgunlover2 1 month ago
how long does this fly on a full tank?
Mrgunlover2 1 month ago
would you recommend one
Mrgunlover2 1 month ago
How can u flg upside down?
jmdogful 2 months ago
@jmdogful the pitch of the blades change.....so when it spins in one pitch the air goes up, in other it goes down.
flyingchimp99 2 months ago
How can u fly it upside down?!?!??
jmdogful 2 months ago
"i cant stop talking about this remote...... ok thats enough about this remote"
wesajarjar 3 months ago
I WANT THAT HELICOPTER!!!!!!!!!!!!!!!!!!!!!!!!!
SonicGirl10219 5 months ago
@SonicGirl10219 start off small like i would recommend a blade mcx2. when you get good at that then may be if you have your orientations down then an blade MCPX. it has the flybarless unit which will be good for beginners. The M stand for Micro, C=collective P=pitch, X=flybarless.
niplapla 2 weeks ago
how much is fuel
troutman141 5 months ago
nice heli and nice flying and also can you me a camera mount?
hamsterlover333 6 months ago
how much is this fine piee of machinery
TheHtown5 6 months ago
What's the flight time on a chopper like that?
barcenasfrank 7 months ago
I am eying this heli to replace a Belt CP V2 that is having difficulties. I run nitro cars and know my way around nitro engines, though I have a few questions.
-What does the transmitter support? Throttle Hold? Flight modes? Dual Rates? Model memory?
-Does the heli come with a governor? If not, can one be added easily?
-Is the build particularly difficult?
lordvader139 9 months ago
Whats the battery life on this?
Please let me know! Thanks!
rouimi88 9 months ago
@rouimi88 its a glow heli....no batteries except the receiver battery
flyingchimp99 2 months ago
heyy can i fly my walkera with 16% fuel?
Chrigi0765 11 months ago
@Chrigi0765 Yes ,sure, as minimum 16% of nitro and 20% of oil with medium glow plug.
forcedomkombat 10 months ago
i get my new walkera hm 83 next week, i made a very good deal i payed 150$ for a brand new walkera hm83. im very exciting to fly it and i hope everything is allright because its not easy to get new parts... greez from switzerland
Chrigi0765 11 months ago
@Chrigi0765 where did u buy the heli?
mike85sx 8 months ago
hi, id like to buy this helli and i have some questions,when u buy this product from xheli,do u get some fuel? how much is the fuel? about the starter do u get 1 when u buy this product
TheNubia2009 1 year ago
@TheNubia2009
hey Hubia for your first question, you dont get fuel for the heli. it will cost you about $ 20 a liter. you can go to your local hobby store and buy the starter kit. This is VERY NICE heli. thumbs up for walkera
zepters85 11 months ago
can u do a review about ninja 450?
TheDarkMurders 1 year ago
Where can i get a Engine Starter and a Starter Battery, a Ignition Battery, and Nitro Fuel for the Walkera #83 .15 Nitro RTF Helicopter
SOPMODllama 1 year ago
I have a Walkera 2801 Pro radio system being used with a Storm 450 carbon edition heli. I am new to this hobby but should soon be ready to try a little 3-D flight. I love the heli but for some reason I am not getting negative pitch in throttle hold position when I have the heli in ST 1 or ST 2. Should I adjust the pull rods so I get more negative pitch and go back and re adjust the NORM position as to only get -1 to -2 pitch or should this be handled with the radio?
Thanks in advance.
ecoovert 1 year ago
What is the best setting for stock set up on the gyro?
SHOGANAI555 1 year ago
Hi again tony, finally i have the heli but i have two questions:
- Do you remenber how many degress of pich are you using? (i have +11/-11)
- You use 15 o 30% nitro....?.
My ciclic is slow, i think i need change the paddles for more agressive flight, i have 65 on both aileron and elevator...(swash)
Last i have a litle drift of my tail to the right, i need to check the neutral point...
Any information i really appreciate..Regards
betofazzo 1 year ago
please i have accidently reseted my transmitter settings for the walkera 83 nitro helicopter.
and my helicopter is not responding correctly. please can you help??
My product is the Walkera HM83 package. with the transmitter call WK - 2801 Pro. A 8 channel transmitter!
nadnetuk 1 year ago
@nadnetuk you might want to call the shop in which you purchased this from. Give their tech support a call
xhelicopter 1 year ago
@xhelicopter hi, i have a wk 2801 and a rx 2801. can the reciever handle 5.8 volts because i want to use it in my trex 600 nitro. what is the setup for the walkera 83 heli? does it have a 7.4v battery and then a regulator what converts it to 5.8 volts. PLEASE HELP.
ravijagdev 1 year ago
@ravijagdev I'm using a Tx 2801E, with a Rx 2801PRO on both my birds, a T-Rex 450 and a T-Rex 600 both electrics with no issues whatsoever.
Datucky 1 year ago
@Datucky yeah but thats with electric helis, i have a 600 nitro and dont know whether the rx can handle 5.8v of power
ravijagdev 1 year ago
@ravijagdev OK, sorry not that familiar with nitro Helis, I thought Electrics were 5.8 but I was wrong, the step down is to 5.1V Regards.
Datucky 1 year ago
@Datucky thanks anyway. u should get into nitro as well
ravijagdev 1 year ago
@ravijagdev I currently have a Hot Bodies 1/8 buggy and a Traxxas Rustler both with fantom engines, I'm just getting into Helis and Electric have been good, don't want to fidle with nitro for the moment :) but gotta love the smell of nitro in the morning!
Datucky 1 year ago
@Datucky yes! nothing can beat the smell of nitro. in helis its kida different to cars. i have a kyosho FW-05 T with a gxr 15 engine. it goes 73km/h on a 120m straight track. im using 16% at the moment. i dont want to go to 20 coz my friend blew up his engine. are the phantom engine any good and whats the price for them usually?
ravijagdev 1 year ago
@ravijagdev The fantom are nothing but greatnes, my Rustler was smoking any other rustler, I´m using 16% too, I believe 20% would be too much, maybe in the .21 in the buggy, but I don't want to have 2 different gallons. I bought them quite a while ago, and got 2 reapair kits. around 130 US
Datucky 1 year ago
@ravijagdev switch to ELECTRIC. i used to have a nitro 600 and then i switched to a electric T-rex 550e 3g. And what a difference. a touch cheaper too. may be not on a 700 though.
niplapla 2 weeks ago
But then again its all personal preference. i live in a tiny town with no flying field and no one to fly with. so electric is better for me!!!
niplapla 2 weeks ago
Hi, how long time it can fly by it's full Fuel tank, And also please tell me where can I buy It? Can i get at SINGAPOOR? How much price is it??? :) Thanks!!!
MrPIJLAW 2 months ago
This has been flagged as spam show
Hi tony
i have accidently deleted my transmitter settings for the walkera 83 nitro helicopter.
and my helicopter is not responding correctly. please can you help??
My product is the Walkera HM83 package. with the transmitter call WK - 2801 Pro. A 8 channel transmitter!
nadnetuk 1 year ago
hello Tony.
i have accidently resetted my transmitter settings for the walkera 83 nitro helicopter.
and my helicopter is not responding correctly. please can you help??
My product is the Walkera HM83 package. with the transmitter call WK - 2801 Pro. A 8 channel transmitter!
nadnetuk 1 year ago
can you guys review the 4#3b walkera?
max9ist 1 year ago
how much was tht walkera?
plz respond
25muscles 1 year ago
i want one xheli doesnt carry them BOOOOOOO
russ25052 1 year ago
can this thing lift a 3-4 lbs camcorder?
agentluv007 1 year ago
@agentluv007 That might be a bit too much for this heli, you might need to consider a 600size to handle that weight with no problem
xhelicopter 1 year ago
@xhelicopter i fly my Trex 550e with the stcok speed controller and motor. I would say that it should be able to lift that.
niplapla 2 weeks ago
@niplapla Give it a try and let us know the results.
xhelicopter 2 weeks ago
@agentluv007 You also have to be certified by the FAA to video tape from a UMA
crackerms0100 1 year ago
awesome flying dude
edwin4759 1 year ago
hi i have a walkera 60b and i am wondering is this more mernuverable and powerfull than my 60b with brushless system and is this beter in anyway than my 60b
lukejwillmot 2 years ago
where can t buy a Walkera 83 Nitro Gas Rc Helicopter and how much are they
perez9420 2 years ago
helidirect has them rtf for 550 i think mabey little more little less
justinRkeaton 2 years ago
360 in uk prob bout round 800 dollars in usa
chubbychicken1234567 1 year ago
will a dx7 setup work on this heli i am assuming no but wasnt sure
scorpionvice12 2 years ago
Good job!
LeChorge 2 years ago
hey can you do a review on the Walkera HM UFLY Helicopter (2.4G Metal Edition)
spookybennett 2 years ago
Not perfect but I thought it was a good review.
Whittier looks beat up from the Winter months....
Use %30 instead of the 20 and it will produce more power but will never rival that of the electrics. Not the point of nitro 450/475s.
lotafunmitch 2 years ago
ELY Q?? The first time i saw that head design was on Henseleit's 3D MP and NT about 3 years ago.
ws691ta 2 years ago
Lol.. Walkera.. didnt look to bad until i seen that they copied the ElyQ Vision 50 Competition's head.
NF650i 2 years ago
how many cost that Helicopter!I ask because i wanna buy thos one too!
RealVideos2010 2 years ago
can you do a review of the walkera 4g3 dual brushles ?
endlent 2 years ago
is this heli like the t-rex 500 ?
endlent 2 years ago
No, its a different breed of helis, but they have the same functionality
xhelicopter 2 years ago
hey i watch all the reviews their great but can you do a review on the blueray 450 v2 by exceed rc?
Colombiandaniel 2 years ago
Hi, there are already reviews for the Blueray 450. You can view it here: youtube . com/watch?v=MPOvJ1Qe7UY (delete the spaces)
-Teddy from rcdiscuss . com
xhelicopter 2 years ago
cheers :)
deangoffe 2 years ago
what percent fuel do you use?
great vids btw keep poasting :)
deangoffe 2 years ago
I'll ask Tony when he comes into the office tomorrow :) He's the pro.
xhelicopter 2 years ago
Also the fuel filter is designed to go on in the other direction. That's so when you fill the tank dirt can't come from your fuel can and set in the clear chamber because that end won't be filtered before the carb... I just bought one of those filters and noticed it..
mxracer3651 2 years ago
I have A few of these helis.. And spare parts ;) . I was wondering if you used the gear switch for a throttle kill? I can decide...
mxracer3651 2 years ago
You can do it, but you have to set up the mixing on the transmitter to kill the engine.
xhelicopter 2 years ago
When will parts be available?
Evillwakebro 2 years ago
Sadly, it's a sample helicopter and we will not be carrying this product so there won't be parts for it. We make videos of everything just to satisfy our fans, even if we don't carry the products.
xhelicopter 2 years ago
what are the odds of xheli selling this model? and what would pricing and parts be like. I would like to get in to nitro but the $ to fix a larger heli keeps me away. the exi 450 parts are cheep as dirt so I am not afraid to try new things. I have bin flying for 6 months and am kind of getting tired of charging lipos . if the price is right I would buy this heli when available.
nismo200sx16 2 years ago
Hey is that at Whittier narrows?
fishravioli 2 years ago
omg NO PARTS lol
wcwickedclown 2 years ago
thanks for finally uploading this video
KILLAMARX1 2 years ago
UH.. I used the EXACT same music in my submission for your video contest.. posted a day before this one.. what a coincidence? ;)
notasixpack 2 years ago
wow, coincidence indeed. haha Just to be fair the video was finished before the weekend and uploaded on Monday. So no chance for us to take the music. Great video by the way
xhelicopter 2 years ago
Great review!! I agree with Tony!! Great heli for the price! I love mine!
ltz400k6 2 years ago
Thanks!! post a video response here of your 83
xhelicopter 2 years ago
Nice flying Tony.That's a nice looking Heli and radio.Your missing a screw out of the gyro.X-Heli needs to carry the full line of Walkera and ESky helicopters .They just might rule the cybercopter world then.Also carry some aftermarket hop ups.
jauchiu 2 years ago
Yeah, ours was a sample model so it didnt't came with a screw. I'm surprised that you noticed that. Xheli will eventually carry a majority of those brands but until then we just have to make due. Thanks for the comment Jauchiu
xhelicopter 2 years ago
Was surprised just how quick that black exhaust pipe discolored, kinda spoils the overall look.
graz27 2 years ago
the black exhaust is just anodized so it will discolor when it gets too hot.
xhelicopter 2 years ago
hey! love the way he says " can`t stop talking about this remote" then not even a second later goes? "enough about this remote"
5,28 into video check it?
streadypierre 2 years ago
We did get into great detail on the Transmitter but we had to cut it short due to the length of the video
xhelicopter 2 years ago
i love nitro helicopters ! but im still trying to hover the blade cx
djccchouse 2 years ago
Keep practicing, you'll be flying 3d in no time
xhelicopter 2 years ago
Im shore. But the Blade cx is not very stable in the air that makes it difficult in my opinions. What would you guys say ?
and could you make a review+flight test over it ?
Philipp
djccchouse 2 years ago
wow first coment!!!!
mozlob2 2 years ago