@180pills PANNELS: there only repro stuff now left i have just enough to sort OUT MY BIKES BUT NO SPARES WHAT IS THERE IS ROUGH: theres a original front gaurd on the ebay for a X 1981 get it and whack nitro moors on THICK and gently stipple it till you can wash off the silver paint (DO NOT RUB) yes it will come off i did mine and the side pannels if you scratch them you can polish them with silver polish ! BUT THE SILVER PANNELS YOU CAN GET THE PAINT OFF BUT YOU HAVE TO BE CAIRFULL !!!!!!!
shes getten there man will be very nice.i just picked up a 1979 rm400 with a 78 rm400 engine.i have to weld the frame there a crack sand it prime it repaint it i have rethal bars for it i recovered the seat in black leather and i have to clean the paint off it he painted it yellow but id rather have the actual yellow colour plastic.i also need brakes swing arm bearing filter brake arm also. but she runs mint
@GREEVES246 were are u located im after a front fender and a # plate for the front..i to had i think it was a 77 or 78 rm250 only payed 50 bucks for it guy put striagh gas in it and though the enigne was completely toast but when u dont have oil in the gas it only wrecks the piston.i just pulled my rm400 in the living rom pulled the engine pulled the plastics n stuff off the seats redone frames painted to exhaust half the engine also pulled th ehead to check the piston its only 1mm over :(
@1983cr125 PAUL MILLER DOSE GOOD REPLICAS OF THE ORIGINALS I HAVE THE 125C 250C AND 400C THEY HAVE 2 RIBS RUN NING DOWN THE GAURDS
SOUNDS LIKE YOU HAVE A LOT OF WORK AHEAD BUT THE 78,S ARE EASY TO RESTO I JUST GOT A BORING BAR VAN NORMAN ONE SOME FUN NOW LOL LEARNING TO BORE (LIVING ROOM I WOULD BE KILLED FOR THAT LOL)
new barons
cat123456789101 1 year ago
Ok thanx
MrFrank1110 1 year ago
Plz i nead the long pipe that conecks to the back brake and conecks the the frame..I don't rember that it is cald.. It's for an 81rm 465
MrFrank1110 1 year ago
@MrFrank1110 TORQUE ROD ARM !!!!!! I DONT HAVE ONE BUT MIGHT BE ONE ON EBAY IT HAS A CASTING ON THE FRONT WELDED ON AND AT THE BACK IS LIKE A SHOE
GREEVES246 1 year ago
@MrFrank1110 THERES ONE ON EBAY SEARCH ON EBAY
Suzuki RM465 rear brake torque arm
GREEVES246 11 months ago
Very nice I have a rm 465 model x. It's in very good condition needs to be cleaned though do you have any extra plastics?
180pills 1 year ago
@180pills PANNELS: there only repro stuff now left i have just enough to sort OUT MY BIKES BUT NO SPARES WHAT IS THERE IS ROUGH: theres a original front gaurd on the ebay for a X 1981 get it and whack nitro moors on THICK and gently stipple it till you can wash off the silver paint (DO NOT RUB) yes it will come off i did mine and the side pannels if you scratch them you can polish them with silver polish ! BUT THE SILVER PANNELS YOU CAN GET THE PAINT OFF BUT YOU HAVE TO BE CAIRFULL !!!!!!!
GREEVES246 1 year ago
shes getten there man will be very nice.i just picked up a 1979 rm400 with a 78 rm400 engine.i have to weld the frame there a crack sand it prime it repaint it i have rethal bars for it i recovered the seat in black leather and i have to clean the paint off it he painted it yellow but id rather have the actual yellow colour plastic.i also need brakes swing arm bearing filter brake arm also. but she runs mint
1983cr125 1 year ago
@1983cr125 i have the 125/250/400 1978 good bikes cheap reeds as well
GREEVES246 1 year ago
@1983cr125 i have the 125/250/400 1978 c models and have some plastics what u after
GREEVES246 1 year ago
@GREEVES246 were are u located im after a front fender and a # plate for the front..i to had i think it was a 77 or 78 rm250 only payed 50 bucks for it guy put striagh gas in it and though the enigne was completely toast but when u dont have oil in the gas it only wrecks the piston.i just pulled my rm400 in the living rom pulled the engine pulled the plastics n stuff off the seats redone frames painted to exhaust half the engine also pulled th ehead to check the piston its only 1mm over :(
1983cr125 1 year ago
@1983cr125 PAUL MILLER DOSE GOOD REPLICAS OF THE ORIGINALS I HAVE THE 125C 250C AND 400C THEY HAVE 2 RIBS RUN NING DOWN THE GAURDS
SOUNDS LIKE YOU HAVE A LOT OF WORK AHEAD BUT THE 78,S ARE EASY TO RESTO I JUST GOT A BORING BAR VAN NORMAN ONE SOME FUN NOW LOL LEARNING TO BORE (LIVING ROOM I WOULD BE KILLED FOR THAT LOL)
THE POWER BAND ON THE 250 IS QUITE POWERFULL !
GREEVES246 1 year ago
@1983cr125 THE 78 ENGINE WAS FAST BUT THE 79 HAD A BRUTAL POWER BAND THOUGH BUT MORE FUSSY TO SET UP
GREEVES246 1 year ago
@1983cr125 SOUND LIKE IT S COMMING ALONG NICE LY PUT A VID ON UTUBE
THE 465 HAS THE ENGINE IN NOW
GREEVES246 11 months ago
WHAT GREEVES DO YOU HAVE I HAVE 16 OF ERM
GREEVES246 1 year ago
just bought an old greeves =)
looking to restore it,
your videos get me motivated!
duder215 1 year ago
@duder215 what greeves do you have ?
GREEVES246 1 year ago
@duder215 what greeves do you have
GREEVES246 1 year ago