WE G39c Magazine Takedown, then ranting about how WE lies.

[addictivepie]

Total waste of over 5 minute of my life

[zendell37]

@addictivepie You were warned and chose to watch it anyway. While this was the first WE G39c mag takedown video, that is no longer true.

[xXxVote4soadxXx]

revolvers have 6 chambers none of them are closed off. are you saying revolvers only have ONE CHAMBER. fucking idiot

[zendell37]

@xXxVote4soadxXx Actually, revolvers have a large range of "chambers".  But I feel that to be more of a terminology.

[uchiha1906]

You so smart! Because gas can travel through a complete "Chamber" as you call it, It's a three "chamber" system because the metal cools individually rather then all at once. Herp derp I try to act smurt :3. I will give you one thing it isn't a "Chamber" in the actual definition of it.

[zendell37]

@uchiha1906 No, it's a three "part" system. It's one single chamber. And that reasoning is good in theory, but doesn't help when the chunk of metal the gas comes out of is below freezing.

[uchiha1906]

@zendell37 But the gas would be expelled so quickly would it have time to be cooled by the utmost top part of the magazine? I doubt it? You have to worry about the bolt and the middle part of the magazine, Getting cold rather then the top due to it holding the most gas.

[zendell37]

@uchiha1906 You mean the liquid would be expelled quickly. True, the bolt is a big factor in this but it also is effected by all this cool down since it's sitting quite close to the top part of the magazine. And honestly, since the liquid would be at the bottom of the mag, I don't see why the middle of the magazine is something to worry about. The action of gas guns happens because the liquid in the magazine boils off so fast. If it slows down, everything else slows down and suffers.

[uchiha1906]

@zendell37 The liquid would only be in the bottom of the magazine and a little of the middle, The top part of the magazine is gas, But even then as I've seen by your OWN video this gun performs "decent" In that it even fires, In the snow I'm not worried about it. You honestly shouldn't complain about "One chamber" Results are results eitherway

[zendell37]

@uchiha1906 Barely functioning is decent cold weather performance? Ok then.

And I wouldn't mind it if they simply fixed their false advertizing. They are screaming about how amazing it is giving a false sense of reliability and "cool down proof". I feel companies should own up when they are wrong or are full of themselves. Obviously WE isn't one of those companies.

[uchiha1906]

@zendell37 Barely function when it was left in the snow is, I just got mine I love the thing no issues at all.

[zendell37]

@uchiha1906 Welp, mine barely functioned properly in sweating temperatures, but whatever.

Differences aside, I hope yours isn't the POS lemon mine has been. I hope your charging handle, hammer roller retaining pin, and full auto sear live long and happy lives with many days of good service.

[zendell37]

@uchiha1906 Welp, mine barely functioned properly in sweating temperatures, but whatever.

Differences aside, I hope yours isn't the POS lemon mine has been. I hope your charging handle, hammer roller retaining pin, and full auto sear live long and happy lives with many days of good service.

[zendell37]

@uchiha1906 Welp, mine barely functioned properly in sweating temperatures, but whatever.

Differences aside, I hope yours isn't the POS lemon mine has been. I hope your charging handle, hammer roller retaining pin, and full auto sear live long and happy lives with many days of good service.

[ikkiiiieee]

Does the magazien leak alot ? pls help me i want to buy this gun pls msge back

thx :)

[zendell37]

@ikkiiiieee No, these magazines don't tend to have leaking issues thanks to the screw on the bottom. It's usually what solves any leaking problems anyway.

[ikkiiiieee]

@zendell37 thx man , ALOT becouse this was the only thing that mattered me to NOT buy this gun :) so now im going to get this gun with 3-4 mags extra :D

thx alot bro :)

[wesKokigen]

Not a rant. Just unintellectual and barely coherent babble.

[zendell37]

@wesKokigen To each their own.

[heyitssean36]

i think it has one chamber guys

[svendewulf]

title should be; WE G39 magazine takedown and annoying rant about the 1 chamber thing what nobody but me cares about and thus makes me very angry and lets me anoy other people who actually just wanted to see the takedown...

[zendell37]

@svendewulf Too long. How's this title?

[svendewulf]

@zendell37 it's better, tough now it seems that only WE "lies" to their customers. in my opinion every company that sells something is in their own eyes the best company around. also, with WE being a taiwanese company, the 3 chambers-issue might just be a misunderstanding in translating from taiwanese. they might have claimed it to be 3-parts and translated that wrongly into 3-chambers. don't be naive and believe everything a company tells you. that's why i like user-reviews so much, they're tru

[zendell37]

@svendewulf Well, considering that I pointed that out to WE's youtube page and the way they reacted to it, I'd say it's more along the lines of purposeful deceit. Having discussed things with one of Evike's higher ups, he's even talked to some of WE's big people, and they don't care.

I'm honest with my stuff. Only thing "impressive" about the new WE line of mags" It has a screw in the bottom that fixes common body leaks. Nothing special beyond that. It cools down just like any other mag.

[svendewulf]

@zendell37 of course, i'm not aware of how much time and effort you've put in this. so what if they didn't invent a superb no-cool-down mag. i've seen vids of it shooting in snowy and freezing conditions in witch most pistols wouldn't even fire the bb, this gun fired an entire mag in semi with no problems. personally that's good enough for me as i'm prolly never gonna skirm in such harsh conditions. did you know that on the orignal HK G36 there is no bolt release button, it's a bolt catch button

[zendell37]

@svendewulf I live in a different universe where the most amazing things are meh, and meh things are amazing. It's rather odd, and annoying. I wasn't impressed by my WE36 apart from the outsidey parts. I've also done an "in the snow" video. We got snow this winter and I experimented with the stock system. I didn't have my kwa pistol, so I couldn't test that as well.

If you pick one of these up, expect parts to break. Cocking handle is guaranteed.

[svendewulf]

@zendell37 i've seen that cocking handle is brittle, is there a way to fix it, or can you get a replacement handle? i think it can't be that hard to make it stronger, or am i completely off? i'm thinking of getting one...

[kinmanyuen]

do you realize this allows to maybe accept 12gr co2 caps in the future without buying a new mag?

[kinmanyuen]

lmao stop saying "one chamber" it's more annoying than "ok"

[thirawatjames007]

Dude, who really cares how many chambers there are in the mag...WE has made one great GBB rifle. Used it in a game and don't have any of those problems you have mentioned, dude. Don't really get why you're so upset with ONE chamber..ONE chamber...ONE chamber....they have revolutionize gas airsoft...You bought it! Used it! It's a great rifle! Don't like it! SEnd it to use! PEACE!

[zendell37]

@thirawatjames007 So you are fine with companies lying to their customers? Ok then. Have fun. And I like it now that I have a reliable power source, and a large ammo capacity. The only thing that they did to "revolutionize" gas airsoft is use a screw on the bottom of their mag.

[ZigZag1808]

Hey my g39c magazine leaks from the top, where the gas is let out, and from where you put the bbs in. How do i fix it?

[zendell37]

@ZigZag1808 Add some oil to your release valve. There's no way for gas to release from where bb's come from, unless it's leaking from one of the sections at the front. Give the screw at the bottom a tighten, and tighten your release valve. That's a good way to fix leaks in any case. If that doesn't help, unscrew your fill valve and soak it in oil, then put it back in.

[ZigZag1808]

@zendell37 Hey thanks a lot. Ill give it a try, how do i tighten the release valve?

[zendell37]

@ZigZag1808 A flat head screwdriver big enough to fit into both slots on it. If the screwdriver only fits into one side, it may mess up the screw, so it'd be best to find a screwdriver that can fit into both sides.

[ZigZag1808]

@zendell37 tightening the bottom screw stopped the leaking! Thanks a lot dude, you've saved me a trip to my local airsoft shop :D

[zendell37]

@ZigZag1808 Glad I could help. I hope you enjoy your g39 more than I do.

[Thebeanstructure]

omg, i still super annoyed, title your video has to understand the number one because thats all you did. and when something gets cold like plastic when it's warm outside, it will warm back up, so stop complaining, if this is all you're going to do then just buy an aeg, because you deserve a gas gun., gosh, so dumb.

[Thebeanstructure]

okay serioiusly this was super annoying to watch, i was hoping to learn about the internal and all he did was put his stupid finger up and and say one the entire video. I has to contain the gas somehow, how can people say it would hvae 3 chambers. People are stupid.

[ZigZag1808]

@Thebeanstructure it does have 3 chambers

[zendell37]

@ZigZag1808 No it doesn't. It has three main parts that create ONE SINGLE cavity/volupe/opening/chamber/­whatever you want to call it. "chamber: an enclosed volume in the body;"

[Thebeanstructure]

@ZigZag1808 i don't care, that doesn't mean the stupid guy has to make a video called, takedown when all he talks about the number three. He should do something like sesame street. And the mag only has one chamber when put together. Just because there are three parts to one chamber, doesn't make it three chambers.

[zendell37]

@Thebeanstructure Ok, seriously? This was going to be a video response to ALL of WE's G39 videos to point out that they are LYING TO THEIR CUSTOMERS. It was also going to be a video response to evike's g39 videos, as well. Problem is, we blocked me from commenting on their videos and said I was just another manufacturer all mad about them making "a super amazing gun". If you want to yell about this, go somewhere else. Want a "real" mag takedown, let me know and I'll do it.

[Thebeanstructure]

@zendell37 well good, finally someone with some reason.

[kungfufish]

the point of using three sections separated by o rings is to keep the sections separate, meaning all three parts would have to cool down individually, much slower than if it was just one piece. Sure the cooldown of the mag is unavoidable, but complaining about cooldown on GBB mags is like, i dunno, complaining it gets dark at night.

You should probably throw your mags in the microwave to heat them up if you dont like cooldown. Make sure they're filled with gas. It would do us a favor.

[zendell37]

@kungfufish For a moment there, it was a useful comment, then it turned for the worst. That is a valid point.  I see it more along the lines of manufacturing reasons.

[DExUS5]

This is interesting, because they claim it has 3 chambers, but what ever, using just single mag has no point in this gun.

[Tisane28]

Shut the fuck up you annoying fucking yank!!!

Yes the mag will explode into peices if you yam it out like a hamfisted twat....it is springloaded!!!

[zendell37]

@Tisane28 Cool story? I'm aware it will do that. I find it odd that they put no effort into keeping it together. Hell, making the pegs tapered would be enough to hold the system together by friction.

[MGZT260V8]

I think there is cooldown with mags (its a fact of science and gas) but both my g39's don't suffer any ill effects. so there may well be cool down but no symptoms. I have two of these rifles one as a G36c and one as a G36k and i've used both of them at -8c with no spluttering or lack of power.

[LieutenantIDan]

Maybe they're not lying, maybe they're just stupid.

also, the follower explosion startled me a bit. Lol.

[1234567890zachary]

man u r anoying!!!!!!!!

[zendell37]

@1234567890zachary Very constructive input to say the least. Care to elaborate?

[RatchetandClankNXTG3]

@1234567890zachary

Your lack of intelligence, proper grammar, and spelling offends me.

[DeltaWinters88]

@RatchetandClankNXTG3 LOL his intelligence is fine. Questioning your intelligence though what did he spell wrong?

[zendell37]

@DeltaWinters88 What you guys are doing is ANNOYING(that's the word he spelled wrong, apart from the short hand, of course). But seriously. Dicks away, my comments area isn't for dickwaving.

[RatchetandClankNXTG3]

@DeltaWinters88 "man u r anoying!!!!!!!!" If I'm quoting the right person. Everything is wrong with that statement, LOL.

[DeltaWinters88]

@RatchetandClankNXTG3 Lol dude I didn't say that haha the other guy did xD

[RatchetandClankNXTG3]

@DeltaWinters88 Shit my bad XD