How often are the tubes in the boiler cleaned. The soot from the wood and the kerosene can quickly foul the tubes. The fire should only be lit with scoops of charcoal soaked in charcoal light fluid.
As for the grease gun that is not small enough for one of the lube job, have you tried needle (grind down the sharp point first)? I used that on helicopter hangar bearing (tail rotor shaft on top of tailboom), you can bend 'em as well.
Is that a Roger Goldmann Baker Vale Gear hanger?
paullubliner 1 month ago
how much hp ?
simsons51racer 2 months ago
How often are the tubes in the boiler cleaned. The soot from the wood and the kerosene can quickly foul the tubes. The fire should only be lit with scoops of charcoal soaked in charcoal light fluid.
MrMKH2010 4 months ago
Do you have to do boiler mabinence or anything? FRA regulations apply? Also, is the 425 you are talking about, is it RBMN 425?
indie1361 5 months ago
As for the grease gun that is not small enough for one of the lube job, have you tried needle (grind down the sharp point first)? I used that on helicopter hangar bearing (tail rotor shaft on top of tailboom), you can bend 'em as well.
TrainAsia 8 months ago
new of course
12myoung 1 year ago
around 20 grand
12myoung 1 year ago
what does something like this cost?
chp16778 1 year ago