sweet job man , i need one of thoose torq a verters ....ill post my bike soon as its done , right now its gettin powdercoated and cuzstom vynald ... but great job and i wish i had more proud owners like u to ride with
i doubt it goes 50mph and STILL has torque.. I clocked mine at 42mph with 10 tooth clutch and 50 tooth rear sprocket w/ no jackshaft.. It sucks in torque tho.
@MotorHeadGreg dude, you're a fucking idiot. This bike has a torque converter, who changes the gear ratio through a belt while you're driving. It's a good combo of acceleration and top speed :)
@Kucan14 its about going out and having fun not having the fastest bike dumbshit. and im gonna get one. if i cant aford it ill get the dirt bug i just need somthing to ride around on other than my bike so either a bicycle or a mini baja. you choose?
@LiLaLiEn3883 Never said it wasn't about having fun. Just saying that when someone says a bike like this has a lot of torque, it is pretty amusing as the opposite is true...
@Kucan14 who cares if it has alot of torqe i got a dirt bug and its pretty fun. and i CAN get up hills pretty good just goes about 5mph going up em but no probloms other than the speed. and it was about 21 degrees outside too
@daking594 at canadian tire its 699. But if you lucky like i was today you can get one that has a visual flaw like a tiny scratch they will take money off i got 135 off for a small dent on the fake tank
@mikestropwn thats an offroadnig license plate, but its still not legal on roads since it doesnt have brake lights or turning signals. so it is fail, it pretty much just shows he owns it LOL
umm you idiot it is baha not baja the j is like an h now the other day i picked up one of these thing and it ran for a day. the next day i started it let it warm up then went to drive it and it staled. and now it wont even start for me. does anybody know the problem?
@TheSleepybone there should be a bolt or nut at the front of it, at the lowest point of the block, use a 10 mm wrench or socket and loosen it off, and let it drain. or the motor itself is only mounted with 4 bolts, just take the motor off in a min and open one of hte fillers and just tilt it
@mecanicman66 too bad baja is a spanish word and j's in spanish have an h sound...its kinda common sense tho ...baja the way u think is pronounced sounds retarted
plzz prononcwe it baja not baha prononce the j as a j not as a h it sound so stupid prononce it right or dont do videos its baja read it on ur bike not baha tired of poeple prononce it like dumb ass
Yo i wanted to get into Dirt Biking , Well not so much Dirt Biking just like riding on Streets paths trails shit like that , So i was wndering is the Baja Heat a good bike for me ? because i want to know if it will be good im 140 pounds and 5 foot 5 soo can u let me know if this will be good shit terible ok man thanks
i commented on your last video on the exaust and stuff i dident know you got the tork a verter thats awesome i had to jimmy rig mine to get that speed if would have known that they sold them iwould have bought it!!
Hey, I'm interested in buying one of those bikes but I have 1 question. I weight 155 pounds, do you think that I could go at least up to 40-44 km/h since my weight is way below the max capacity???? (without adding anything to the motor)
HELP!! on my baja 90cc i recently went to change the oil..and lossened the wrong bolt and when i took the bolt off a spring and shaft flew out of the transmission. i tryed putting it back but the thing wont shift out of first is there anything i can do please guys helppp!!
i bought mine three days ago at checkers auto parts for 409$ american. Plus one quart of 10 40w oil and thread lock to keep the bolts from coming lose al in all it was 420.71$
unfortunatly shucks is being bought out by O rieleys which is why i got the discount O rileys is discontinuing them...so you need to act fast...still the $599 ones are worth it and they can be heavily modified. their are a few disign and quality controll issues on em but the engines are bullet proof
where did you buy that Torque-A-Verter from ? and how much did it cost ? can you make a video showing everyone how to do everything step by step please ?
I think i speak for the majority of the feedback posted...My son and i bought 2 of the Baja 196 cc dirt bikes and have enjoyed them for over half a year. Problems are definetly the footpegs which break easily and the plastic cover for the torque converter which both of ours got chewed out on the 1st day of riding (caused by the spinning torque converter) Also both of our rear tires are gone. We ride about twice a week but havent for the past 3 months as were in Canada. check all bolts every ride
i have the same mini bike but no torqu-a-verter but if i put a torqu-a-verter i think that the acceleration is not great but i want to know if the accelaration is realy slow with the torqu-a-verter or it medium please reply me or do a video of you accelarete on the mini baja bike!
hey nice bike!! can you please list all the mods youve done to it? or is the torque-a-verter the only one? can you also list how much money the mods cost and also how much time it took to complete them? thanks
Yeah Ive got one also what size was that comet torq a verter system u got for it? Eventually I will get the 196cc motor if u can Please let me know details about your torq a vertem.
its always funner to go fast on a slow bike than to go fast on a fast bike. and its 18mph stock 28mph slight mod and yes will go 50mph with the full modification...clutch governor exhaust and aircleaner
dude stock it goes 21 and if you loosen the thortle control tops you can get 25mph. if you mod it goes close to 35mph. the dont make that many parts for a minibike like that. pocket rockets have more parts
stock it goes 18mph screw turned all the way out 28mph. but if you bypass the govoner and re work the linkage it goes 50mph...if you put the torqu a verter on it goes 10mph faster to what ever mod above.
i have the heat and i took the govoner out (pain in the ass) the torqu a verter is pretty much the only thing for it other than that its tires and a exaughst
i drive my doodle bug at 35mph all the time for the last two years with no problems...the heat is basically a chinese ripoff of a subaru motorcycle motor. if your worried about it get a clutch so the engine speed is slower at higher speed. the govonor is a safety and legal issue. you would techniqly have to wear a helmet get a licence and mirrors if it were allowed to go its true potential.
yall know with these u cut the frame and make a chopper and get a smaller sproket and i hit about 50 they are fast but it hurt tha engine so i put a kawasaki 250 motor and i hit about 80 to 85 now
Most people consider this bike to be a piece of crap. It's not. I have one and I love it. I've never failed an attempt at starting the engine more then 3 times. 196cc..omg you can go up some really steep terrain with it.
no kidding this guy is such a loser... I wanna vomit after watching his crappy bike on his crappy video...make me laugh and puke at the same time....GOD!!!
I found out that you can make it go even super faster the piece that shows you how far your pulling the throyyle back if you take that black cap thingy that over top of it and just loosin nit a little it will allow the throttle to go farther baack !?
actually "bigcatlm" it goes faster than my friends 2000 Suzuki KingQuad 300cc.that atv does 50mph and my friends baja beats it by a long shot.the acceleration is way better than that of a manual atv.
Nice bike, i have the 2005 model with the 5.5 hp engine. goes great in the mudd but like everyone else, id like to know more about the torq a verter system. measurments etc and the best place to buy one.
i put on a torque converter too!! what a great upgrade. fun in the snow too. looks great
vg300zx1 1 month ago
Please tell me were you got the tork-a-verter from. Please MSG me back thx.
iHasFalcon 3 months ago
sweet job man , i need one of thoose torq a verters ....ill post my bike soon as its done , right now its gettin powdercoated and cuzstom vynald ... but great job and i wish i had more proud owners like u to ride with
BigDoggCustoms 7 months ago
i have the same bike do you know how to fix the brakes because mines are squeaking when i stop(besides buying new ones)
hislimshady1 8 months ago
0:44 where did u order that?
crazynick5612 8 months ago
i doubt it goes 50mph and STILL has torque.. I clocked mine at 42mph with 10 tooth clutch and 50 tooth rear sprocket w/ no jackshaft.. It sucks in torque tho.
MotorHeadGreg 9 months ago
@MotorHeadGreg dude, you're a fucking idiot. This bike has a torque converter, who changes the gear ratio through a belt while you're driving. It's a good combo of acceleration and top speed :)
leafyism 9 months ago
@leafyism Dont bleed you pants now..
MotorHeadGreg 9 months ago
sick
PaperBatVGmini 10 months ago
i have this one but a little older it doesnt start any idea of wats wrong it been sittn for a yr or 2.
TreDaySure 11 months ago
what kind of torq a verter is that
directorman550 11 months ago
only in Canada! i don't know what to do laugh or cry.
sillyfish111 1 year ago
how ave you got it plated wtf you dont even ave flashers and mirors
msngros 1 year ago
did you make this bike street legal, it seem that you have a licnese plate on the back, but you don't have the mirrors.
pandorakid229 1 year ago
is the moter after market and i have the doodle bug its awesome
TheDevlin800 1 year ago
I have another video if you click my name called "Huge Mini Bike Jump". We clear 25 feet!!
daveliontamer 1 year ago
"A lot of torque", LOL that's amusing. I guess you've never ridden a REAL bike before if you thin these things are powerful.
Kucan14 1 year ago
@Kucan14 its about going out and having fun not having the fastest bike dumbshit. and im gonna get one. if i cant aford it ill get the dirt bug i just need somthing to ride around on other than my bike so either a bicycle or a mini baja. you choose?
LiLaLiEn3883 1 year ago
@LiLaLiEn3883 Never said it wasn't about having fun. Just saying that when someone says a bike like this has a lot of torque, it is pretty amusing as the opposite is true...
Kucan14 1 year ago
@Kucan14 who cares if it has alot of torqe i got a dirt bug and its pretty fun. and i CAN get up hills pretty good just goes about 5mph going up em but no probloms other than the speed. and it was about 21 degrees outside too
LiLaLiEn3883 1 year ago
it was 357$ at checkers. oh and you wouldn't trade it for the world? your retarded.
coopercrue 1 year ago
i am geting 1
picapop12345 1 year ago
How much does this cost .. PLZ reply
daking594 1 year ago
@daking594 at canadian tire its 699. But if you lucky like i was today you can get one that has a visual flaw like a tiny scratch they will take money off i got 135 off for a small dent on the fake tank
bryan0102 1 year ago
@mikestropwn thats an offroadnig license plate, but its still not legal on roads since it doesnt have brake lights or turning signals. so it is fail, it pretty much just shows he owns it LOL
mj20003 1 year ago
yes. a lot of torque!!! with upgraded carb intake and exhaust its hitting a wowwing 11-12 ft lbs!!!!
please note the attempted sarcasm
mj20003 1 year ago
nice bike,where did you find the Torq-A-Verter? i have a 70cc Baja dirt bike and that might work on it
hudsonpowersports 1 year ago
That bike is so slow that it is a shot bike
vecchio1000 1 year ago
umm you idiot it is baha not baja the j is like an h now the other day i picked up one of these thing and it ran for a day. the next day i started it let it warm up then went to drive it and it staled. and now it wont even start for me. does anybody know the problem?
dang53 1 year ago
@dang53 try adjusting the idle screw clockwise then start it. and adjust it to full choke if cold start, hope this helps
jackuserjack 1 year ago
@jackuserjack kk thanks
dang53 1 year ago
Canadians are so damn nice.
nairb2693 1 year ago
do you know how to change the oil on it cause i have one and cant figure out how
TheSleepybone 1 year ago
@TheSleepybone there should be a bolt or nut at the front of it, at the lowest point of the block, use a 10 mm wrench or socket and loosen it off, and let it drain. or the motor itself is only mounted with 4 bolts, just take the motor off in a min and open one of hte fillers and just tilt it
mj20003 1 year ago
@mecanicman66 you are an idiot
nowinsession 1 year ago
how much was the tork where did you get it (i read up it goes 35 mph)
sherk429 1 year ago
i have on just likeurs can you post a vid on how to adjust the chain on it thnx
XxChillinx 1 year ago
well dumb ass when i went to school the j didn,t have the sound h so you are the f,, moron
mecanicman66 1 year ago
@mecanicman66 your a fucking retard you pronounce it baha not baja fucking idiot
TheSleepybone 1 year ago
@mecanicman66 too bad baja is a spanish word and j's in spanish have an h sound...its kinda common sense tho ...baja the way u think is pronounced sounds retarted
hehehe212 1 year ago
plzz prononcwe it baja not baha prononce the j as a j not as a h it sound so stupid prononce it right or dont do videos its baja read it on ur bike not baha tired of poeple prononce it like dumb ass
mecanicman66 1 year ago
@mecanicman66 dude, the "j" has an "H" sound. Your the dumbass, go back to first grade.
SMEXYandRID3 1 year ago
i wanna kno where did yhu get torq-a-verter cause i got the same mini bike an i wanna kno how to make it go top speed
mrjohnson012 1 year ago
I had one and it was pretty fun, it really could have used rear suspension because the ride could get very bad on bumps or rough terrain
pyroboy08 1 year ago
where did you buy your torque a verter system
wildzdriver 1 year ago
I got a Baja Dirt Bug with a 6.5hp motor in it its beast but to big for the frame, the chain somes loose to fast:(
w1ldyovvnz 1 year ago
baja motorsports mini baja mini bike lol at the baha baha baha baha lol chek my old comments!
sukh2k9 1 year ago
Comment removed
cat123456789101 2 years ago
where did you get that upgrade
RealReaper700 2 years ago
I got a dirt bug with a full tricked out kart race engine i can get it up to 55 mph lol
vwsmoke 2 years ago
Yo i wanted to get into Dirt Biking , Well not so much Dirt Biking just like riding on Streets paths trails shit like that , So i was wndering is the Baja Heat a good bike for me ? because i want to know if it will be good im 140 pounds and 5 foot 5 soo can u let me know if this will be good shit terible ok man thanks
xTIPsYcHo 2 years ago
baha baha baha
sukh2k9 2 years ago
its baja motorsports not baha baha baha mini baha baha baha
sukh2k9 2 years ago
Vous-avez une plaque! donc elle est plaqué et roule sur route ?
DZdiode 2 years ago
you talk about your minibike like its the reason why you wake up every morning
teehee1995 2 years ago
how much was that torq a verter becasue the cover i had on there is starting to melt
gunlovingmuscleman7 2 years ago
how much was your Torque-A-Verter ?
xtreammopedrider 2 years ago
at northern tool and equimpment the most expensive one is 200 bucks
mautsta19 2 years ago
How do you install a torque a verter on the mini bikes, interested in doing so? Thanks for your reply.
Jefkoz8899 2 years ago
i got a 196cc baja warrior mini bike,i think mine was made in 2008,i got it for 450 at a rummage sale,how much does it go for new?
mautsta19 2 years ago
about 500 bucks
ZZ327 2 years ago
How Do U Get The Lighs On The Side For The Baja And How Do U Get License On The Back Of It
NaeNae453 2 years ago
i commented on your last video on the exaust and stuff i dident know you got the tork a verter thats awesome i had to jimmy rig mine to get that speed if would have known that they sold them iwould have bought it!!
randyrhoads15 2 years ago
decent
genarelal 2 years ago
Hey, I'm interested in buying one of those bikes but I have 1 question. I weight 155 pounds, do you think that I could go at least up to 40-44 km/h since my weight is way below the max capacity???? (without adding anything to the motor)
vincelaf12 2 years ago
ya cause im 168 5 foot 8 and i go 40 km
ColbyReid 2 years ago
HELP!! on my baja 90cc i recently went to change the oil..and lossened the wrong bolt and when i took the bolt off a spring and shaft flew out of the transmission. i tryed putting it back but the thing wont shift out of first is there anything i can do please guys helppp!!
nitropshyco 2 years ago
hey i have done the same on my pit bike but all i did is make shure i put the spring in the way it came back and i had no troble
mrkillowatt 2 years ago
lol not thatt easssy lol i had to put it in a reset the whole clutch system i wish it was that easy lol:)
nitropshyco 2 years ago
lol
mrkillowatt 2 years ago
if you could tell me where to by a Torque-A-Verter and are they easy to install
nightatroxbury 2 years ago
How much does a 2007 carbon mini bike cost?
Jakethesnake340 2 years ago
i bought mine three days ago at checkers auto parts for 409$ american. Plus one quart of 10 40w oil and thread lock to keep the bolts from coming lose al in all it was 420.71$
pilgor87 2 years ago
lol i got mine at 33% off at shucks for $349
markbotv3 2 years ago
markbotv3 (1 week ago)
lol i got mine at 33% off at shucks for $349
Shucks? do they have a website and do they still any on sale
I'm looking to get one of these
they seem like a lot of fun
Thanks
bkermie16 2 years ago
unfortunatly shucks is being bought out by O rieleys which is why i got the discount O rileys is discontinuing them...so you need to act fast...still the $599 ones are worth it and they can be heavily modified. their are a few disign and quality controll issues on em but the engines are bullet proof
markbotv3 2 years ago
where did you buy that Torque-A-Verter from ? and how much did it cost ? can you make a video showing everyone how to do everything step by step please ?
Lem7518 2 years ago
thats what it came with
astonmartinman94 2 years ago
the little doodlebug can go 35mph by just removing the govoner. it only has 2.7 horsepower.
markbotv3 2 years ago
i have the same torque a verter on my go cart. the most impressive thing about it is how fast it makes your ride accelerate.
airsoftjelly777 2 years ago
hi what does a torq-a-verter actually do?? do you get different kinds?
cheers
allhailnirvana :)
Allhailnirvana 2 years ago
where did you get the torque a verter?
buddybestor 2 years ago
I think i speak for the majority of the feedback posted...My son and i bought 2 of the Baja 196 cc dirt bikes and have enjoyed them for over half a year. Problems are definetly the footpegs which break easily and the plastic cover for the torque converter which both of ours got chewed out on the 1st day of riding (caused by the spinning torque converter) Also both of our rear tires are gone. We ride about twice a week but havent for the past 3 months as were in Canada. check all bolts every ride
mauller 2 years ago
i have the same mini bike but no torqu-a-verter but if i put a torqu-a-verter i think that the acceleration is not great but i want to know if the accelaration is realy slow with the torqu-a-verter or it medium please reply me or do a video of you accelarete on the mini baja bike!
pocketpissenli 2 years ago
what a creeper! and that is some piece of shit hardwear store shit bike
MicroTbashing 2 years ago
Can I get this at Pepboys???? SOMEONE PLEASE ANSWER.
enjoiboy385 3 years ago
yes you can i got one from there
TechandHelp 2 years ago
the mini bike yes but not the torqu-a-verter
pocketpissenli 2 years ago
which type is the torque a verter casue i have the 5.5 hp one and i rllyyyyyyy want it but theres 4 choices for the tav2 system plz resopnd
fatalitypaintball22 3 years ago
i will trade my kx250f 2007 for this bike :O
polarisrider096 3 years ago
cool bike
gokartdemon14 3 years ago
were did u buy the torqu-a-verter and how much was it
bigrig4321 3 years ago
hey.. wait till i get mine online. its got a 12.5 electric start Briggs on it... also did a mod on exhaust... pipped
KoonTank 3 years ago
where did you buy your torqu- a- verter
pocketpissenli 3 years ago
cool
fourwheeleratv123 3 years ago
cool
fourwheeleratv123 3 years ago
hey nice bike!! can you please list all the mods youve done to it? or is the torque-a-verter the only one? can you also list how much money the mods cost and also how much time it took to complete them? thanks
JUMMPY4 3 years ago
my frend has one too it is alot of fun
uther56 3 years ago
i have an "09" model
ojoj626 3 years ago
LOL NICE BIKE!!I WANT 1 !!! well the 2008
imaguitarhero3 3 years ago
Yeah Ive got one also what size was that comet torq a verter system u got for it? Eventually I will get the 196cc motor if u can Please let me know details about your torq a vertem.
detarxjcmark2 3 years ago
got one too, best $349.99 I spent
obryan214 3 years ago
were did u get one for 350
dayoubjr 3 years ago
shucks. that included the $50 mail in rebate.
obryan214 3 years ago
Lol man you got ripped i paid 165 bucks canadian for my comet torq-a-verter
CalebYoung2008 3 years ago
how much did the torq a verter cost
chinoandnena 3 years ago
where did you get the torque averter
yoyoyoretard 3 years ago
thats just a mock gas tank right?
schibble101 3 years ago
ya the real one is on the bottom
zminker11 3 years ago
This comment has received too many negative votes show
50mph my ass. try 28 mph at the most. buy a real dirtbike. u sound like u are a 40 year old guy that lives with his mom.
11mustangcobra11 3 years ago
is that what you do? you go around watching videos trying to insault people. does your father know your a cum homo yet?
markmarkmark53 3 years ago 2
its always funner to go fast on a slow bike than to go fast on a fast bike. and its 18mph stock 28mph slight mod and yes will go 50mph with the full modification...clutch governor exhaust and aircleaner
markbotv3 2 years ago
tell me more about how to make it go as fast as it can go please ?
Lem7518 2 years ago
well first of all tell me what you have or have not done. and well go from there
markbotv3 2 years ago
dude stock it goes 21 and if you loosen the thortle control tops you can get 25mph. if you mod it goes close to 35mph. the dont make that many parts for a minibike like that. pocket rockets have more parts
astonmartinman94 2 years ago
stock it goes 18mph screw turned all the way out 28mph. but if you bypass the govoner and re work the linkage it goes 50mph...if you put the torqu a verter on it goes 10mph faster to what ever mod above.
markbotv3 2 years ago
i have the heat and i took the govoner out (pain in the ass) the torqu a verter is pretty much the only thing for it other than that its tires and a exaughst
astonmartinman94 2 years ago
ya the governer is in a fucked up position.
markbotv3 2 years ago
Can you blow the engine by taking the governor all the way out or no like will the rpm's be to high or is it ok to take it all the way out
bkermie16 2 years ago
i drive my doodle bug at 35mph all the time for the last two years with no problems...the heat is basically a chinese ripoff of a subaru motorcycle motor. if your worried about it get a clutch so the engine speed is slower at higher speed. the govonor is a safety and legal issue. you would techniqly have to wear a helmet get a licence and mirrors if it were allowed to go its true potential.
markbotv3 2 years ago
18 mph is the baja dirt bug stock speed but this is 25 mph stock speed
jackanaps12 2 years ago
you say baja alot
ni7ck13 3 years ago
where did u get the torque a verter
Adammertens123 3 years ago
which tav2 did you buy?
bmxsk8park 3 years ago
where did you get the torque averter
copsinmyhouse 3 years ago
This has been flagged as spam show
_¶¶¶¶¶¶¶__ ¶¶¶¶¶¶¶ ___¶¶¶¶¶¶¶¶__ ¶¶¶¶¶¶____
_¶¶¶______¶¶¶__¶¶¶ __¶¶¶¶¶¶¶___¶¶¶¶¶¶¶¶_
_¶¶¶______¶¶¶__¶¶¶ __¶¶¶ ______¶¶¶__¶¶¶¶_
_¶¶¶¶¶¶___ ¶¶¶¶¶¶¶ ___¶¶¶¶¶¶ ___ ¶¶¶___¶¶¶_
_¶¶¶¶¶¶___ ¶¶¶¶¶¶____ ¶¶¶______ ¶¶¶__¶¶¶¶_
_¶¶¶______¶¶¶_¶¶¶___ ¶¶¶¶¶¶¶___¶¶¶¶¶¶¶¶__
_¶¶¶______¶¶¶__¶¶¶__ ¶¶¶¶¶¶¶¶__¶¶¶¶¶¶____ Copy And
OOGAboogaPAINTBALLER 3 years ago
i have the same bike and im making a video for it that will be up by the next two days
eggface246 3 years ago
that thing is only $500 i saw it at pepboys why would u not trade it for the world, why not buy a real bike
gigglepals 3 years ago
hes got it for 299 at canadian tire
poolappen 3 years ago
does the tav make it not as stronge but faster
jtm11111111111111111 3 years ago
does the tav make it faster but because of that not as strong
jtm11111111111111111 3 years ago
.....and its a piece of shit...
bikercc 3 years ago
yall know with these u cut the frame and make a chopper and get a smaller sproket and i hit about 50 they are fast but it hurt tha engine so i put a kawasaki 250 motor and i hit about 80 to 85 now
bigpimpin1991 3 years ago
its great in the snow too!
asimp777 3 years ago
yeah its a great bike but i had to get a new spark plug about a year after i got it.
asimp777 3 years ago
Most people consider this bike to be a piece of crap. It's not. I have one and I love it. I've never failed an attempt at starting the engine more then 3 times. 196cc..omg you can go up some really steep terrain with it.
icanhasN64 3 years ago
were can i get a torq a verter and how much would it cost ???????
ryan098098 3 years ago
Where did you get the "torq-a-verter??? Cuz i have a baja mini bike without one. I really want to know.
thank you!!
ianwalt95 3 years ago
thats a nice bike
Movies4theSoul 3 years ago
did you have to make any modifications to fit the TAV or did just bolt right up?
jdmcat 3 years ago
how fast does it go
kajigf 3 years ago
where do you get a tork a converter
thermalnose 3 years ago
what kind of work on the frame do you have to make it fit right? is there any other ways to make it go faster? awnser asap! thanks
15sup 3 years ago
does that torque averter change it to mostly top end?... or do you still have alot of get up and go?
thirtyoddsix 3 years ago
whata fag
TylerGarbee14 3 years ago
no kidding this guy is such a loser... I wanna vomit after watching his crappy bike on his crappy video...make me laugh and puke at the same time....GOD!!!
stiff1upnya 3 years ago
Bikes a turd. My brother owns one.
qwertyI234 3 years ago
where did u get that torque a verter
dcaterjr18 3 years ago
gob2003
Tell me if this is the torq-a-verter you have.
part#218353a 3/4" bore 10 teeth,# 40/41 chain.
Please let me know because I have a 2007 baja mini bike.I would like to up grade.THANKS
chancelocks 3 years ago
Yes, that is the exact one you will need.
gob2003 3 years ago
THANKS
chancelocks 3 years ago
is this fully auto or semi auto
anthonyf2 3 years ago
Fully automatic, just like a snowmobile.
gob2003 3 years ago
do you have to add oil to the gas
anthonyf2 3 years ago
yes add lots of 90w gear oil about a 50 50 ratio
stiff1upnya 3 years ago
is that a 196cc?
ismokegreentrees 3 years ago
Yup, 196cc!
gob2003 3 years ago
you should make a video of you topping it out..also howmuch was your torq a verter??
ismokegreentrees 3 years ago
listen pal you should trade for a real bike not a pieace of china shit..
you cadadian jackass basturd lol
bigbikernor 3 years ago
I have a real bike, a 1973 Honda XL 125. Check out my other video's. But this little Baja is surprisingly fun and great in the trails.
gob2003 3 years ago
learn how to spell faggit..... dumb american fucks.
ismokegreentrees 3 years ago
you mean faggot*
wowcow1123 3 years ago
where did you get the torque inverter i have one and im trying to make it go faster, please reply fast!!
sonofagucci64 3 years ago
cool i want a bike like that.
BMXkid7 3 years ago
I found out that you can make it go even super faster the piece that shows you how far your pulling the throyyle back if you take that black cap thingy that over top of it and just loosin nit a little it will allow the throttle to go farther baack !?
verizondsl100 3 years ago
I love your video And found the torq kit online
and ordered it i got mine to 37 with intake mods and carb mods looking froward to this one
troll159 3 years ago
where didu get it and how much does it cost?
utfballfan813 3 years ago
canadian tire junk.
get a real bike.
not a toy
butch603 3 years ago
so true
MoparMan16 3 years ago
actually "bigcatlm" it goes faster than my friends 2000 Suzuki KingQuad 300cc.that atv does 50mph and my friends baja beats it by a long shot.the acceleration is way better than that of a manual atv.
kran95 3 years ago
i would trade it for anything and my friend has one and there is no way in HELL that goes faster than any 4 wheeler..
bigcatlm 3 years ago
Nice bike, i have the 2005 model with the 5.5 hp engine. goes great in the mudd but like everyone else, id like to know more about the torq a verter system. measurments etc and the best place to buy one.
wooksta69 3 years ago
does anyone know where to buy a torque converter similar to the one he used? and how much it costs?
bigbelt315 3 years ago
I have the same baja mini bike, its really cool but i do want to get the custom torq converter, like he has on his. but is a great bike.
a261991 4 years ago
how much was the thing that made it go faster?
freakylizard01 4 years ago
they cost around 180 dollars for the kit.
bernies27 3 years ago