that sounds goood... i have a 98 honda accord and im going to put a high flow cat on it and i was wondering if i keep the stock O2 sensor will it throw a code?
so i have a honda with a direct kit cat from magnaflow.. but it didnt come with hardware for header to cat gasket and the other one.. what should i do?
@mirc225 Sorry I haven't checked comments in a while. I am sure you figured something else out by now but you would do one of three things. Get an original one for your car (dealer or parts place), find one that is similar at a parts place, or use some kind of exhaust gasket maker (along the lines of RTV silicone but hi-temp)
@yos3z if you view the Berk Tech instructions I think it mentions that is should be a little easier (and no intake removal required) for the earlier models. Double check on their site though!
Great vid mna you make it seem so easy but i cant get under the car with just jacks lol its very unconftorable when i install my exhuast just one question. are those high flow cats street legal inCalifornia? cause i want them lol!
~Good video, well done on that mate. Should have watched it before I got dirty with mine, only thing is the older the car the harder to get those fecky bolts off!
And some HP increase too might I add! Haha, congratulations on the new mod. From the other videos of the Nismo exhaust and Berk HFC combo, it seems like there is a slight "metallic" rasp present though.. That's what's keeping me away from doing this combo. I owned the Nismo exhaust too but switched to a GReddy TI-C single.
Yeah, the hp gains were surprising. In some ways the gritty, race-car like sound is fun. The only real problem I have is the Z finds a lot of excuses to rattle or buzz. A loose panel in the trunk, some stones stuck in the heat shields, etc. No matter which exhaust combo the VQs are just exotic :)
do these throw a cel?
silntinsnty 6 days ago
i literally cant figure out how to disconnect the o2 sensor plug on my z...
Green6sick6 1 month ago
do these pass smog?
Coltons350z 2 months ago
nice man !!
bloodyangel5463 2 months ago
Amazing video, extremely detailed. Please keep it up!!
crawfdady 2 months ago
wow nice no rust. A bit different than mine Z :)
350zvince 3 months ago
so this install could also be used to install test pipes?
GrabbinSomeHAX 4 months ago
Great video!
TheTongMan 5 months ago
that sounds goood... i have a 98 honda accord and im going to put a high flow cat on it and i was wondering if i keep the stock O2 sensor will it throw a code?
Accord1998man 7 months ago
Should make more videos such as full exhaust and headers install.... ;-)
You should also install a stillen gen 3 intake.. yup yup!
yodar1 8 months ago
Should make more videos such as full exhaust and headers install.... ;-)
yodar1 8 months ago
I love this Video. I own a 2006 model and this should make it cake for installing my Megan Racing cats! Thanks alot!
SeventhSanctumStudio 10 months ago
i love how it sounds when returning back to idle 9:01 so changing the cat to a high flow cat will give this sound to my car exaust?
eldom20 1 year ago
awesome, ill be using this vid when i instal my berk test pipes which should be here any day now!
steveo4747 1 year ago
very good video and very informative this is how all how to videos should be
mapko15 1 year ago 5
@mapko15 Thanks man. I try to cover all the bases!
AutoHowTV 1 year ago 3
Nismo muffler?????
13slot28 1 year ago
@13slot28 Yep, Nismo catback was on there at the time.
AutoHowTV 1 year ago
nice vid! i got to make some extra cash working on a friends friends g35. very helpful. I wont know what im doing but I'm mechanically inclined ^_^
CltfinestMR2 1 year ago
@CltfinestMR2 where's my cut???? haha just kidding. Glad you could apply the video!
AutoHowTV 1 year ago
@AutoHowTV more respect to the G35 now. I never cared after i bared beat one but now i like them ^_^ their cool and sound awsome!
CltfinestMR2 1 year ago
Comment removed
faYte0607 1 year ago
so i have a honda with a direct kit cat from magnaflow.. but it didnt come with hardware for header to cat gasket and the other one.. what should i do?
mirc225 1 year ago
@mirc225 Sorry I haven't checked comments in a while. I am sure you figured something else out by now but you would do one of three things. Get an original one for your car (dealer or parts place), find one that is similar at a parts place, or use some kind of exhaust gasket maker (along the lines of RTV silicone but hi-temp)
AutoHowTV 1 year ago
wow fucking bad ass vid! thanx!
allsystemsup 1 year ago 2
@allsystemsup haha thanks
AutoHowTV 1 year ago
I have a 04 z (NON HR) do i have to remove the intake and engine cover?
yos3z 1 year ago
@yos3z if you view the Berk Tech instructions I think it mentions that is should be a little easier (and no intake removal required) for the earlier models. Double check on their site though!
AutoHowTV 1 year ago
ur vids are the most helpful out there.
apatheticE5 2 years ago
i had a ton of problems removing the O2 sensors.. it seemed like they just werent removable..
ivantang5 2 years ago
PB Blaster is a savior...just keep it away from the plastic pieces and it will make everything a lot easier.
AutoHowTV 2 years ago
Great vid mna you make it seem so easy but i cant get under the car with just jacks lol its very unconftorable when i install my exhuast just one question. are those high flow cats street legal inCalifornia? cause i want them lol!
350gtrs 1 year ago
great vid..!!! please make a vid to install 350z headers. :-)
yozo9 2 years ago
When do u think u are going to put out some new videos??
DaViDlEe93 2 years ago
I have some videos lined up...just gotta find some more time! Probably not for a month or two.
AutoHowTV 2 years ago
awesome show!
EvolveVolvo 2 years ago
great vid, keep it up.
Jaydaguy 2 years ago
~Good video, well done on that mate. Should have watched it before I got dirty with mine, only thing is the older the car the harder to get those fecky bolts off!
andlid 2 years ago
The sound keeps getting better and better too. So much more fun to drive around town.
AutoHowTV 2 years ago
And some HP increase too might I add! Haha, congratulations on the new mod. From the other videos of the Nismo exhaust and Berk HFC combo, it seems like there is a slight "metallic" rasp present though.. That's what's keeping me away from doing this combo. I owned the Nismo exhaust too but switched to a GReddy TI-C single.
faYte0607 2 years ago
Yeah, the hp gains were surprising. In some ways the gritty, race-car like sound is fun. The only real problem I have is the Z finds a lot of excuses to rattle or buzz. A loose panel in the trunk, some stones stuck in the heat shields, etc. No matter which exhaust combo the VQs are just exotic :)
AutoHowTV 2 years ago
sounds amazing!
xxdudexx11 2 years ago
Great Vid
elwill0207 2 years ago
thank you...been waiting for this video for ever XD
DaViDlEe93 2 years ago
awesome video!! thanks so much!! =D
phoenixdat1993 2 years ago