Added: 4 years ago
From: sirHOAX
Views: 271,269
Sort by time | Sort by thread (beta)

Link to this comment:

Share to:
see all

All Comments (125)

Sign In or Sign Up now to post a comment!
  • What in gods name is that song! I'm in love

  • HHO = 2 hydrogen, one oxygen or H2O, or dihydrogen monoxide, or water. Suckers.

  • i sense overheat problems =P. people that build hho cells never take heat into consideration, what a shame...

  • @vanguardbr in the winter heat is your best friend. regardless it only overheated when it was producing HHO during brute force. Anything under 120F is fine for a HHO cell.

  • @vanguardbr he out on a heat shield!

  • i got a 95 it has the same engine as your car so can i add you as a friend cuase im going to have this project done and may need some advice

  • sorry who wants to see this installation of a box into a car.... Thats wat everyone can do... Show us the generator, the bubbles, the pressuregauge, the fittings to the motor, and a running HHO car!

  • The nest time no music and tell us what we are looking at.

  • Duh. Does it not say enclosure?! lol.

    By the way, check out my facebook page if you wish, Hydrogen Powered Engines Should Replace Petroleum and Electric Engines

    If we all do it, we can change the world!

  • This is not a hydrogen fuel cell. please do your research

  • Yo Hoax how did you deal with your car's CPU recognizing the hydrogen as a burnable fuel???

  • Thanks for sharing. Just one question, don't you run out of battery because of the electrolysis?

  • nothing out there works....yet, for now hydrogen can produce electric power

  • this song is annoying as fuck god it gave me a headache.

  • must be as annoying as your commercial BS you listen to daily. Your comment is off topic, care to contribute anything else remotely in the realm of what this video is truly about?

  • I like this song.. :)

  • whats the name of the song? i like it

  • Lose the music.

  • nice up sirHOAX.

    keep bigging yourself up.

    we need these on the street. hard.

  • HHO produce very high temperaures... Look at the guys who make torch and cut can with it... the same thing happen in your engine and it is not design to resist such temperatures... So maybe your gonna gain a few gallon but your engine and the joints are gonna deform and finally break down after a few ten thousand miles...

  • No it burns faster too, so the heat is about the same.. And you can use a fuel cell and get no heat at all..

  • how are you going into the engine? man, i need a shop....i installed a cell in my Dakota (manual trans) and just finished installing a pretty cool switch into the cab..working off my kitchen table.

  • Sent me $100. for instructions for installing an aquarium in your car.

    It wil increase gas milage because, your car will break down and sits on the driveway.

  • this is fake and ill prove it.

    take a look at 0:37

    thats a picture of the flame.

    hydrogen burns yellow where as a normal burner uses a special form of alcohol which emmits photons(light) at a wavelength of 470 - 300 nm (visible blue to near ultraviolet) the picture explains it all

  • That's a butane torch, smarty pants.

  • Well to settle this once and for all, POST an independent dynotest. It should show there if it really does save on gasoline.

  • I would think that the generator builds up enough heat by its self without having it mounted right over the exaust manifold.

  • People like you need to go to school. You have the creativity and drive to do great things but not the knowledge to understand exactly what you're doing. For everyone wondering why their fuel cell isn't giving them great mileage and if maybe it's all a scam - sorry, it is, and please stop lying to yourself. I've actually seen a marriage end in part because of the guys obsession with this stuff.

  • lol. was it yours?

  • How come so many people with hho on their car, run at 15 to 30 amps, use baking soda, and still can not run their car on water? Stan Meyers used only 2 amps and nothing but plain water, no baking soda, and he ran his car on only water...no gasoline! Why can't anybody do what he did? Was it all a lie?

  • Meyers' car was a hoax. The conventional fuel (gasoline) was probably hidden within the vehicles tubular frame. No one has managed to get a small lawn mower or chain saw engine running purely on HHO let alone an automobile engine! Unless Myers had broken the laws of physics and electro-chemistry, then I'm afraid he just duped everyone. Proton Exchange Membranes and Ultra Capacitors are the way forward - not HHO generators.

  • are you kidding ha just look there are so many people running engines on hho including me

  • I'm not saying you cannot run a car on a gasoline/HHO mix but unless you're towing a massive generator behind you while you drive, it simply isn't possible to run an automobile engine purely on HHO made onboard via the car's generator. Even if you could use a lean-burn engine, there just isn't time to produce the gas in the quanity needed to keep - for example - a 2 litre capacity engine running at 3000rpm at cruise speed of 70mph.

  • Never say never.

  • @TK42138 What about a reserve? Much like a capacitor for a stereo system. Only bigger. Say the size of a propane tank. You could add at a gas station, or a separate system in the car could funnel a little off in higher production / lower demand periods. This could give the added fuel mileage at freeway speeds.

  • @billabong24041

    Sounds like a good concept however if stored in a hydride solid or as scientists hope to do soon - using carbon nano-tube storage then hydrogen or HHO production and storage would be easier than having to cart around a heavy propane tank or hellishly expensive cryo tank for liquid hydrogen. They reckon nanotubes could store a huge amount of hydrogen due to massive surface area.

  • @TK42138 I'm still trying to figure out how the formula to disprove how effective hho systems are works. Because the point is to supplement fuel, not air. Granted I understand it takes quite a bit of both. But I'd like to see the amount of hho gas needed to replace gasoline to get a comparable amount of combustion. The amount of air used is irrelevant. Because it doesn't take equal parts gasoline and air. But I can imagine dilution to be a factor.

  • @billabong24041

    It comes down to energy density. Because Hydrogen is the lightest gas and only weighs 0.0899 kg/m^3. You need an absolute huge volume to run an I.C engine purely on gaseous hydrogen and there's no generating method yet made that can produce enough HHO to run an average engine (2000cc) at say cruise speed - 2800rpm at 70mph.

  • @TK42138 Well it can't be pure. It needs oxygen to actually burn doesn't it?

  • @billabong24041

    Absolutely.

    The problem is how to make enough hydrogen using an onboard generating system. 1 mol of hydrogen would take up 22 litres and would weigh 2grams. To make a kilogram of hydrogen would mean you would need to produce 11,000 litres of it!!. Now factor in that most HHO electrolysers are making 2 to 4 litres per minute and you can see that hydrogen in gaseous form is not an efficient or viable fuel source or energy carrier.

  • @TK42138 if you put in a tank of hydrgen and then the fuel cell to suplement the hydrogen ibelive that should work

  • @wazii6

    I suppose that would work it's just that H2 is so difficult to store in liquid form. Storing it as a hydrate or hydride form would be much more practical.

  • Looks like a good design and workmanship. wonder if the next video was posted ?

  • HI

    Looking Good.I just want to know where can I buy like this Box.Thq

  • looks like a 8" or 10" underground wiring box

  • Thank you for the info.bye for now

  • google  "run your car with water" or "denny klien" you can buy a kit or plans! let me know how you make out!! could be a great investment!

  • vc se preocupa mais onde vai por a celula? aff

  • Does this car really run with water ? if it's possible, can you make a video showing it in action please.

  • Not really here is my take on HHO. Your normally getting about 15% efficiency. When you add in HHO some of the wasted energy is mostly used create the hydrogen.

  • I love your mounting!! Awsome job!

  • Kudos for all the helpful HHO information, research and discussion on this post. It is soo needed. Respect. But I have to ask: what is the name of this song or the artist? Others have asked before, but no answer. I just have to know...

  • And mpg gains with this?

  • If that is the exhaust side of your motor,It will overheat your cell! It has to be away from heat. You will find out. nice job though.good luck.

  • I assume this is going to be for Straight constant DC Electrolysis. Amperage decreases with temperature. You might consider channeling some heat to the cell from that exhaust manifold its sitting on. Just a thought.... Now go search "Hello Hydrogen" and help me with an idea please.

  • That's just Awsome! Nice job! I'm using an oversized glass mason jar with 2 stainless steel blank electric outlet wall plates. I cut them into quarters and trimmed them to fit into the mason jar. {Plugged into the 15amp fuse boz on and on/off switch, and works awsome. I'm getting about 25% better economy off the bat in my 08'pt cruiser, in just the first several miles of driving it. Since there's no room in the engine compartment, I'm gonna build something like what yours in the trunk.NICE JOB

  • Hi guys,for about 4 months i'm watching all this hho videos,i know from 6th grade that H2 burns easy :) no doubt about this. Now with all this prices of gas in europe, i want to modify my car :) i own a Daewoo Matiz with 3 cylinders (780 cubic cm) and a consumption about 5L@100km or about 47MPG. Before i start to build a production HHO not at toy :) i want to know how much HHO gas should i produce to feel some difference in Benzin gas consumption?

    Thanks

  • Hose barbs I have if you need a 10 pack, 3/8 x 3/8 Nylon.. most stores don't carry these and home depot or lowes or they might carry a few if your lucky. never be without barbs again if your making your own cells. Ebay item 250267329649

  • lol. What crap. Taking energy from the alternator to create a minute amount of hydrogen to run it through an otto cycle loosing more than 70% of total energy. lol. Why not hook up a DC motor to the axles and have the alternator run the vehicle? People you cannot get something from nothing, this kind of crap was proven wrong over a hundred years ago. Causing you car to run super lean to gain mileage is not safe and will cost more in the end.

  • One of the most monitored industries is Aircraft. All pilots know that when flying a small aircraft most all models come with a "Lean Burn" knob on the Dashboard! You are instructed to lean out the gas mixture when flying. This does NOT hurt the engine! You are instructed to lean the engine out until you here the engine slow or start to stumble. Then instructed to turn back a 1/4 turn to richen up the mixture a bit. This is done EVERYDAY with NO Engine Damage.

  • Excess is already getting dumped into the alternator but wasted. All your doing is using the excess to create hydrogen which reduces the amount of gasoline required. Think about this. Most people that say it works are people who are not selling anything, they just want to use less gas. The ones saying it doesn't work are relying on forumlas without using 100% of the variables and not even trying it.

  • We have to find a solution... no use bickering. do what you can.

  • that looks like a weatherproof PVC junction box, but how did you fix the window in the lid?

  • Where did you get that square container?

  • froderoo.. your a retard. The goal is mileage gain not electrical gain. An alternator stock has more than enough electrical energy to sustain the reaction of the cell producing hydrogen gas.

    I have 3 cells in my car and with a few other mods have more than doubled my fuel mileage.. but hey.. while I'm driving on "bogus: fuel have fun emptying your wallet at the pump douche bag, i'll be the guy driving by waving being propelled by my bogus fuel. HYDROGENFUEL CELLS MORE THAN WORK PEOPLE!

  • Interesting take on things, seeing how most of these guy make their own stuff and do not sell anything.

    sirHoax and ZeroFossilFuels and many other people on Youtube are hobbyist chemists and physicists as well. Still not saying they aren't lying. But they sure are investing a lot of time into making these video's if they do not sell anything.

  • So everyone on youtube who says they are getting mpg gains are liars?

  • Rubbish look at the chemistry, it's pretty sound. they do recommend that zinc is used for the plates and also that the surface of each plate is roughened up somewhat. You do need a fair stack of interconnected plates to make it work though.

  • How much did your mpg go up?

  • When the HHO Expo takes place in Florida this November, new standards will be set by the automotive industry. Within a year we'll probably see standards set for pre-fitted kits for all conventional gas powered vehicles, so everyone will be able to get twice the mileage and buy half the gas. I predict this will coincide with the price of gas doubling, amid a carefully orchestrated dis-information campaign, brought to you courtesy of BIG OIL and their noble lobbyists. Still, this is a great start!

  • twice the mileage on half the gas? lol....after november lets talk so I can laugh at your dumb ass.

  • Aye, that's a bit of a long shot. Maybe twice the mileage for the same amount of fuel. Instead of quadrupling or what ever it is you are stating. 2x Distance for 1/2 Fuel.

  • I have no idea what you are talking about but "2x Distance for 1/2 Fuel" means 4x Distance for full Fuel. In other words, quadrupling.

  • Thanks for sharing, I see lots of critics on the comment box.

    Those who can do, those who can't criticize.

  • Why are none of you taking advantage of Gibb's Function?

    You'd need only a voltage regulator. It turns out that water being processed at 1.42 V DC is an entropic reaction. In fact it is endothermic, meaning the water will appear to actually cool. If you get any rise in temperature, you are putting too much voltage across a cell. The gain is significant. 69.91 J/k per mole of gas - almost a full 1/3 of the current necessary.

  • have you thought of using a 02 sensor simulator(EFIE) to keep your ECU from pumping more fuel into the engine b/c your 02 sensors would tell the ECU that the oxygen levels in the exhaust is too high...or something like that.

    join w w w . N I C O C L U B . c o m

    we take our NISSAN's seriously!!

  • Not sure why you want to modify the o2 sensor when you can simply modify the injector.

  • How can I modify the injector? Do I modify one or all injectors?

  • MAP enhancers definately have a grip on it. you can adjust it from the turn of a dial.  60.00 on ebay.

  • Go  to the junkers and buy injectors off a car with a smaller engine

  • could you tell me what the housing is made out of and where you found it. thx

  • What song is playing? sounds cool.

  • are u an idiot im 15 and ive made a hydrogen wooden car and besides i agree with new age motors u would burn it up and what if ur going over bumps in the road and that mess blows up ull be lookin really retarded burnin on the side the street

  • You will kill yourself with that thing. The enclosure box is a gellcoted fiberglass box that will never withstand the exhaust header temp. or the core plate temps. and melt. It's too big deep and wide - it will splash and sway unless you have deviders going across in both directions, sucking in water to your output. The mount feet are NOT steel reinforced inside the core of the encloser, they will break off cracking the entire body of it causing a ground point for the cell electrodes to ground.

  • Sorry, you probably will not kill yourself... unless you're talking on the cell phone.

  • you've got some skilz

  • they are a pain in the ass to charge...

  • wtf a plastic box with pipe it's all what it is !!!!!!!!

  • 2br2br2 I laughed so hard, Im discovering thats so true as I'm looking into anything that cuts into The dark sides profits lol

    Its no BS at all, Im highly fascinated with all this!

  • No scam folks..the unknowing and unbelievers are usually connected with the oil gods in one way or another...they ,of course want you to continue to buy their oil/ethanol lies. See: HHo ecogreen HHo=H2o , keep up the good work sirHOAX !

  • ethanol is crap. As you know it takes diesel to cultivate. Diesel to mine potash for fertilizer/shipping etc. all in all oil/ethanol has a far worse carbon footprint than HHO. UNlike gas Oxyhydrogen can be made from solar/wind etc.

  • Nice video - why don't you create a schematic - and parts list to build this. Create a link put it on the web?

  • I just posted video about the guys who sell the plans for $19.95. hho-hybrid . com or go to my videos I have one on my Dodge Stealth

  • I just built one of these. Works great....BUT

    now you should try running a 1500 Watt inverter off the 12v system, running the 110 VAC output into a 1200 volt/60 amp rectifier and that into the cell. I am putting out about 2 ltrs. per min., brute force w/little heat being produced, no electronics and less than 10 amps! Distilled water w/ only 2-3 flakes of KOH... (continued....)

  • one thing id like to point out........ NOS jacks up car engines, So with that said, would this HHO increase the wear tare on the cars engine?

  • For more information on this please type the following:

    squidoo. com /runacaronwaterfuel

    just erase the spaces in between the words

  • home depot - electrical section

  • savebigh20 Where do you get the plastic box you are using for your Hydrogen system?

  • home depot - electrical section

  • thank you I liked the way you have your HHO box set up looks more professiona than some of the others I've seen. If I have any other questions is it ok to contact you?

  • approximately 7~8 liter of hho gas production is need per min to run egine.

    what if car was going upward the hill..it will effect the hho production becuse water will slope to other direction. plsma spark sounds more better...i'm putting all my budget on this.

  • hi man.. nice project =) good luck. whats the names song please?

  • cool video but the music is gayer than shit.

  • Hey sirHOAX, do you have any updates on your Altima project.

  • i have a fuel cell but i do not know where to connect to my car1

    can anybody help me out or send me a ebook or PDF??

  • connect? your hho inlet or electrical.

  • can you tell me where do you get a box like this for your HHO cell?

    I wrote to you a couple of emails but no reply

  • Try home depot electric department by the switches .

  • what kind of metal are you useing in the cell it self??????? what amp????? how much water was used???

  • stainless metals need to be used within the cell. amps vary on type of solution you us.

  • nice cell whats the name of the music its groovy

  • Love it! But since your car is a 98, did you compensate for the O2 sensor reading more oxygen in your exhaust? This will cause the computer (1995 and newer) to compinsate by dumping more fuel into the engine, thus reducing your gas mileage. Make sure you tap into the line on the O2 Sensors (should be two in the exhaust) before and after the Cat. Put a voltage device that will trick the computer into running a leaner mixture. If you want to know more, mail me.

  • Nice install.

  • Hoax , great work guy, we need more details and specs , im new at this kind of work . im very impressed ..God bless man....Norm

  • Great video, thanks for sharing 

    name of the artist/song please?

  • Thanks Again Everyone..

    Had tested it last night on a small amount of electrolyte, with a 4-plate configuration space moderately around 2/8th of an inch.

    The system was running great for the first 15-30min, then as expected a temperature spike of 220F. Shut it off at that point.

    Now I am designing the cooling system for the final stages of this install. Wish me luck..

    Regards, --HOAX

  • Great Job Hoax !! Yes that is a standard PVC Electrical Junction box. Can't wait to see the road tests.

  • great. pls check the private message I send you

  • What are the internal dimensions of the PVC enclosure you are using??? Great job!!!

  • Thanks for the positive comments everyone!

    The dimensions of the enclosure is 6" Wide, 6" Depth, and 4" Height. The company that makes it is Carlon, and I believe its made of schedule 40 or 80 PVC. Which should tolerate temperatures of 300°F before it starts to degrade under pressure. (Electrical Grade)

    Again, Thanks for viewing my videos..

  • nice...

  • Thats really cool. Great job with the install. Thanks for sharing.

Loading...
0 / 00Unsaved Playlist Return to active list
    1. Your queue is empty. Add videos to your queue using this button:
      or sign in to load a different list.
    Loading...Loading...Saving...
    • Clear all videos from this list
    • Learn more