How to Make/Build a Snowboard/Ski box

[boarder128]

Did you get your lexan from homedepot and

If you did how well does it slide

[aerogrl2844]

how heavy is the box....is it easy to move.

[buckwildproductions1]

@aerogrl2844 no its heavy

[JonJonGH]

Put some screws in them holes XD

[sugarbushski]

what the hell lexan is $212 for 15ft

[buckwildproductions1]

@sugarbushski it depends on the thickness

[sugarbushski]

how thich should the lexan be

[boobfaceable]

lexan is a lot more then $60

[jarsofhoney16]

this helped alot thanks!

[truemeister09]

Does it need coping?

[R3ACTxMACHINE]

can you cut lexan with a motor powered saw

[buckwildproductions1]

@R3ACTxMACHINE yea

[ThePittfan7]

y did u put to pipes on the side?

[buckwildproductions1]

@ThePittfan7 its coping its to make a rounded edge to the plastic, if you don't have it the plastic won't be protected

[ThePittfan7]

@buckwildproductions1 ok thank u

[babichshawn]

song naem?

[buckwildproductions1]

@babichshawn time to pretend - mgmt



[babichshawn]

@buckwildproductions1 thanks bra

[popman535]

3:08 gegehehehgeherararar lol

[SKATEOFLEONARDO]

why didnt you said the instructions on the glue box

[BBoyJ97]

Song?



[bsaxton11]

What is the point of the coping. why don't you just put the plastic on?

[buckwildproductions1]

@bsaxton11 it makes a rounded edge to protect the plastic and your board

[StephenOwnsItUp]

Get buckboard from a plastic shop, ( I think its what they use in hockey boards)

Works like a charm, and relatively cheap (60 is for 2x4 sheet)

[ASDproductions6]

is this sturdy?

[warguy245]

Great Video!!!!!

[TheCrazy8man]

where did you get the plastic the fit the box exactly



[squirrelxxxpownage13]

haha nice vid man

[freestyleskier859]

do u got 2 holiday valley i do im in Ohio

[MrNatk123]

good vid

[leon111125]

How do u make the gap for coping? And btw do u wax the top of it or put snow on it?

(I'm new to snowboarding) plz respond

[OutOfBoundsCrew]

THANKS!!!!

[peanutboy2009]

dose plastic sheting work or is that bad

[RaptorRacer250r]

@peanutboy2009 I had lexan or whatever and it cracked now i have trex its really nice

[TheSportstar98]

@RaptorRacer250r Where did u get the trex cuz i can't find it anywhere

[peanutboy2009]

what song is this????

[RaptorRacer250r]

@peanutboy2009 Time to pretend by mgmt.

[RideDervish]

where did you get the pipes at?

[mrskateboardfan1]

hahahah fail coping



[askatej7]

could i wood glue the lexan on?

[dirtdevil1987]

how big is your drop in i built one ten feet high and i don't know if i can make a box for it

[Brooklyntheninja]

Where do you get hdpe?

[callac123]

whats a good thickness for the sheets how much would a 8' by 2' wide be

[1995brendan1995]

Alright so next time I'm in buffalo I will grab some, it's 1/2 inch diameter ten ft long tubes for 10$ right

[buckwildproductions1]

@1995brendan1995 yea i believe so

[1995brendan1995]

Hey man. Are you from the states, cause i think here in canada, steel is much more expensive then 10$ for 10ft? If you could reply that would be awesome cause i need to rebuild my 2 boxes this summer :)

[buckwildproductions1]

@1995brendan1995 yea im in NY. but theyre thin hollow tubes you may not be looking at the right stuff

[anibioman]

@buckwildproductions1 hey im in ny too thats coool

[THEJBUDS]

@1995brendan1995 i get steel in canada for cheaper than 10$ per tn foot i get it for like 6$

[1995brendan1995]

@THEJBUDS Hey man was it super thin and did it hold up. and what store?

[Zombiepingoo]

Thanks man! i dint know how to do this and this can be a project for me!

[supervalid]

next make video how to build that big thing on u backyard where u start that :D

[ExciteModz]

looks nice. i love your drop in. iam in the process of making mine its almost like urs but its only 8 feet tall how tall is your drop in?

[buckwildproductions1]

@ExciteModz mines 10 feet. 8 feet is good 10 was a little tall, especially for spins on rails and stuff we go a little too fast

[ExciteModz]

@buckwildproductions1 ok thanks so much

[skjelvene]

Where can i buy plastic???

[buckwildproductions1]

@skjelvene home depot they have 4x5 sheets for like 50$ cut it in half and your good to go

[kookler22]

this is the gay version of time to pretend

[californiaskater100]

way better than my bow

[prosnowboarder19]

poor defenseless snowman...

[chickenyoyo6]

sweet broski

[covington55]

thats fuckin dope

[KRENZ7]

What are the deminsions of your starting ramp? Like how tall is it and how long is your ramp?

[1rednotebOok]

awsome tutorial man. many thanks

[nick0478]

i want to make one thanks for the instruction

[Mrjstan123]

I used pvc lasttyearr and it works, but its not as good as metal. Its alot easierr and you slide alot slower.

[smartpartzzkidd]

polyurethane tyler, lol

[JOSH2225x]

also how tall is your box? and what size coping did you use?

[JOSH2225x]

do the plywood sheets on the side of the box keep it from swaying back and forth when you ride on it?

[crazy4tiger]

when u screw the plexiglass down dont do it to hard or it cracks. and liquid nails wont hold the plexiglass on cuz its not ment for that type of plastic.

[VuXXXen]

how mutch is the plastic cost ?

[kiffy731]

what's the width 2ft?

[beamightyhunter]

how do you secure the coping to the box?

[crazy4tiger]

@beamightyhunter lipuid nails



[Md55Mark55Md]

LOVE THE SONG!!

[samsquatches]

sick. looks like a pro job. gay questions though come on people! how to build a drop in? just find some fucking 2x4s and put plywood on top!

[donaldishardcore]

how think is that lexan?

[Gnike9]

Could u post a video on how to make your big ramp in the video

[buckwildproductions1]

Idk PVC might break or just catch your edges. I would just go for the metal it's fairly inexpensive

[erminmurrill]

@buckwildproductions1 pvc works, i have 2 rails made out of it, a shotgun and a single, and they held up for last winter just fine

[neyanz]

@buckwildproductions1 i made a box and didnt even use pvc or metal just left it and it works fine

[merkymonster]

pvc would work for the coping true?

[vdl1996]

@merkymonster Your edges MIGHT catch

[LordGaspixx]

Grtzzz i want do that

[Xxsnowboardii]

where can u get hdpe or any plastic for the top of boxes

[vdl1996]

hey wut if i cant find anything thick enof to countersink the screws into? can i like use some kind of ultra adhesive? maybe liquid nails?

[buckwildproductions1]

idk try it

[buckwildproductions1]

idk try it

[crazy4tiger]

@vdl1996 no dont use liquid nails. it wont stick.

[vdl1996]

@crazy4tiger Alright, I decided Ima do a rail anyway. So much less supplies and I don't need hdpe or anything like that

[1995brendan1995]

how much does the sheet of plywood cost

and does pvc work

btw how much did the particle board cost too

[SEASONF1VE]

how thick is the lexan coment back

[buckwildproductions1]

idk no more than 1/4 inch

[neversummer987654321]

sik set up

[marty1091]

nice, looks sick. u should like put pictures under the plastic cz its see through lol. have like a design on the box.

[beatlesrock354]

i just got a long rectangle peice of plastic withs sides that i use for a box its prolly 2 feet high and 9 inches wide but its perfect cause i spent like 3 dollars on it and you never cut your edge into it

[GOJAGS555]

whered u get the plastic??plz respond

[buckwildproductions1]

google it. the only way you will find out is finding someone who has used it or trying it yourself

[doop35]

where do u get the rails?

[buckwildproductions1]

read description

[kona65734]

how tall is your drop in?

[kenyonbrannon]

song

[puckplaya]

"time to pretend" by MGMT

[pennryan2]

Wat is coping? Is it just putting the rails on the side of it to make sure you dnt scratch up ur ski bottoms?

[buckwildproductions1]

yes

[k1234567890p]

does it slide well and nice vid :)

[buckwildproductions1]

yea it slides good

[guitarmunkey27]

how good is plex is it expensive

ware dou get it

[buckwildproductions1]

read description

[MrRodeo1080]

can u do video on drop in?

[cmilligan92]

Is the box sturdy?

[buckwildproductions1]

yea. just have enough supports and do the job right

[LoveKillsSlowly14]

Me and my friends made a 22ft box, from youre design. Thanks man.

[cmilligan92]

How wide is your box?

[buckwildproductions1]

not positive but somewhere around 1 1/2 feet. its personal preference

[19Macker]

Do you need the coping on the side ?

[buckwildproductions1]

yes unless you use another type of plastic. and dont ask me which type cause im not naming all of them

[tomecBooSt]

if i use HDPE will i need coping?

[buckwildproductions1]

im not sure. ik hdpe is stronger so it might not be as neccesary. the coping is tricky to get set up right but i think its worth it

[sunburstrider154]

would plexi glass work?

[Freeskikid8]

Not to well. It cracks to easily.

[nimsxmx]

or maybe ice on a plank lol...=D

[mckMagicman1]

song

[buckwildproductions1]

time to pretend  mgmt

[mckMagicman1]

thanks

[codolf1]

Really good video man thanks you helped me build my box and i made it 15 feet lol

[goheels2550]

whats the song in this video? Thanks

[ACACCAAC]

How thick is your lexan? I can't find any like 1/2" thick stuff in my budget so I'm thinking about liquid nailing it on, would that work? If not... time to save =/ But then it's like $120 but huge so I could make it like 20ft long, that would be sweet :D

[adridram77]

you dusted that snowman

[chub321]

make a vid how to make that drop in ramp :P

[buckwildproductions1]

no figure it out

[StArFoX888DraGoN]

i hate it when ppl ask the stupid questions its like figure it out yourself

[UsernameClayton]

Oh my that's pretty sick!!!!

[pdylan1234]

hahahaha nice snoman. so random lolo

[buckwildproductions1]

yea the snow was shitty so i didnt feel like riding

[pdylan1234]

hey where u liv? we should go snowboardng

[buckwildproductions1]

ok?

[jobebme]

the cheapest solution is linoleum flooring. it works great and it can be dirt cheep. just try to get a smooth design. that's what i am using on my box and its great.

[teamswords]

any type of linoleum, like the design on the top doesnt matter, i have a bunch in my garage and its supposed to be like tile ...

[jobebme]

basicly yes... i used some individual squares for a couple spots, but mainly used a flexible fiberglass panel (comes in 4 X 8 sheets)

[ACACCAAC]

They crack I think...

[buckwildproductions1]

no one said you couldnt

[vladka001]

5/5 but u should use the filler they use to fill the fuck ups in your snowboard to fill the holes where the screws are not the glue. It makes it more slippery.

[F3RR4RI95]

sweeett 5/5!!

[buckwildproductions1]

thanks

[TailPress09]

i have lexan on my box.. that stuff is super sturdy! you dont even need rails on the side, it doesnt dig in at all.... if u dont wanna use that much money on lexan go for HDPE. its what they use at the ski resorts.... and thickness? quarter inch... that will last for a long time.

[mooski95]

hey did that plastic work

[buckwildproductions1]

only used it a few times last winter but it worked from what i could tell

[MrBbobProductions]

how thick is the lexan you used.Also do reccommend lexan or should i use something else

[buckwildproductions1]

maybe 1/4 1/2 inch i dont remember. and it works alright. what you use depends on your price range just look around

[SuperBmxer123]

how high is your drop in?

[buckwildproductions1]

10 feet

[rez107]

To make your box even cooler you could spray paint a design underneath the plastic. I plan to do that with templates or something along the lines of that.

[darkgaiasonic]

this song is on sw snowboarding

[MatIbanez]

my drop in ramp is 7' high, 13' long do you think thats good enough speed to hit 5' jump

[buckwildproductions1]

idk maybe. 5 feet high or long

[Stuart1712]

Hey where did you buy the coping cuz i am making a box and a shotgun rail so i need to no!!

[buckwildproductions1]

home depot

[pivotanimatorjoe]

Ask your local home hardware, Rona whatever. Most of them have hdpe High Density Poly Ethelene

[twintipper123]

could i use fiberglass

[buckwildproductions1]

i dont know. it could be too brittle in the cold

[11xXDANIXx11]

@twintipper123 it'll break

[dodobird188]

call an arena near u like ur high schools arena and ask them wer they got theirs and get the # then call them i got hdpe like that

[olarosenlund]

smooth man!!

[winter4433]

how did the plastic work on the box? i might use that...

[buckwildproductions1]

i only got to use it a few ties cause the snow melted. but it worked good

[chilibro]

me and my friend are trying to make a box. we have making it down but what excactly do u put on top to make you slide.

[danpul23]

i used pvc sheets for the top, but i dont know where the hell you would get them, my dads friend just had them

[WeThreeFriendz]

YOU, So you ride a GT, You want to go faster??? Well i got a little tip for you.

All you need is wax! not from a candle the liquid wax, it makes you go faster and get faster tricks!

[Zipcode78]

aha thank you help'd me alot

[volcomftw94]

if i use trex, do i need to wax it?

[buckwildproductions1]

idk. i dont even know what it really is i just have heard of it

[everybodysdoingit]

thanks a ton ive been trying to find a cheaper way to make one and now i found one. i just got one question and it prob rilly dumb but what do u mean by coping? great song by the way. did u get it from shawn whites game?

[buckwildproductions1]

coping is the metal on the sides the protects your board from nicking the corners of the plastic. and i just knew about mgmt

[offfuckfella]

screw the box! i want your drop in ramp hah. jk the box is sick.

[KingAlverson]

how did you build your downhill?