@Dragon4eva I would say 2000 grit is very fine. more for buffing paint work. Although working your way up diffrent grades such as 1000, 1200 etc. would give very clean results. :) This kit is no where near what I can do now. Hope you catch my sazabi when its finished ^^!
good thing kamm that you had good experience dealing in hobbylink. mine was HORRIBLE.. very bad customer service. damage box/item, poor coordination.. very disappointing ><
@kamniks No problem, you do nice work. I hand paint my tanks and can sometimes see the brush strokes, even after thinning it down. I'm still trying to figure the right paint to thinner (water) ratio.
Dude your vids are helping me so much that my g-3 is almost done so far I made all the battle marks but I have to dry brush the whole kit, so thanks dude thanks
The weathering seems a bit uneven on the lower legs; the shins don't have enough scuffing on it to match the knees. The off-centre decal on the back also really gets under my skit. Other than these minor gripes, though, this is absolutely fantastic all around. Another a great work from Kamm!
@CitrusJuicebox Your the only one to notice that decal ;) good job citrus. I too was disapointed with it. Damn dry transfers! Also imagine the modelling kneeling and diving. Then imagine the shins hitting the floor. Not that your wrong, I do believe I should have weather the model a touch more, but tried to keep the damage relevant to its actions ^^ thanks for commenting.
@CitrusJuicebox i dont think actual battle damage (as im sure is is supposta be showing) is gonna be even! lol the pilot isn't gonna try and make sure the damage looks right! so i don't think that the criticism you gave him on that was valid...
Like everyone said, it's so hard to believe it's hand painted!!! You have an airbrush, you should use that. Seeing how your hand painting is, you're probably awesome with an airbrush too! :D
@Gomenchaiii haha I hate airbrushing.. even priming my models angers me! I enjoy hand painting it relaxes me. Even if it takes twice as many coats. Gotta enjoy the hobby right?
@kamniks That's the first I heard!!!! I LOVE airbrushing. I like how the color slowly changes hehehe (I hate doing whites though because it's hard to tell), and it dries so fast! The only annoying part is cleaning, and when it clogs, I have take it apart for deep cleaning, and also the fumes. What paint to thinner ratio do you normally use for hand painting?
@Gomenchaiii I guess because england is so cold, my garage is always subzero! Erm I thin by EYE lol which is terrible. Maybe somthing like 3 - 1 paint to thinner. Once i get the look of the paint i want i stop adding water ^^ guess its just wat im used to doing.
@AriesTheUmpteenth Thanks Aries! Much appreciatd. Im finding that the colour scheme is diving people ^^ I tried my best to encorporate the HLJ colours. Thanks for the kind words!
@jumpingspoon02 I use cheats! haha lots and lots of layers homie. Everyone loves the scar, im glad I could pull it off. We care going to change the very fabric of existance with our FAZZ collab bro. Thanks for the feedback Jamie
@tc012009 Appreciate it TC. I hope they like it too. Overall im not that happy with it.... what would usually take me 2 months took me 1. I soppose the pressure got to me as im so inexperienced. "doh!" Thanks again!
@josiebeara hehe thanks man. I made a mock plan in photoshop for the idea. At the moment some people like it, some people hate it ^^! I guess we shall see what HLJ have to say. Thanks for commenting
You never cease to amaze me Kamm, wonderful BD work! Definitely HLJ colored!!! What do you print on for your custom water-slides? Only CC I got is a nice flat top coat would hide those decal edges, other than that this is fantastic!!! Love the destroyed leg thruster armor reveling the inner frame and HLJ will looooooove it too or they are crazy! Also what are those things on the head?... Radio transmitter?
@GundamGuns GG! ^^ I use clear inkjet water slide paper (il pm you a link. Cant seem to link in this comment!) I completely agree with you on the Decal an top coat. Im still learning to get the decals to sit how I want them (didnt want to use this model as an experiment) :P Thanks for the great feedback and the head thing is a transmitter lol yeh! :D
@SNEEPER1980 haha thanks a lot sneeper :D thanks for taking the time to comment. It means a lot. This kit was "commisioned" by hobby link japan hopefully will be on there website soon.
What type of red paint did you use for this? I'd be interested in using it as well.
jedimasterham2 1 month ago
@jedimasterham2 Hey bro. I used Citadel Blood Red ^^!
kamniks 1 month ago
what would you think about running a very fine sandpaper (2000 grit maybe) just softly over the general body?
Dragon4eva 3 months ago
@Dragon4eva I would say 2000 grit is very fine. more for buffing paint work. Although working your way up diffrent grades such as 1000, 1200 etc. would give very clean results. :) This kit is no where near what I can do now. Hope you catch my sazabi when its finished ^^!
kamniks 3 months ago
Wow, that's actually really cool
WallCrawler1610 5 months ago
@WallCrawler1610 THanks bro! :D
kamniks 5 months ago
What's The Song Name ?
exilefreedom102009 5 months ago
@exilefreedom102009 Unlimited Sky by Tommy Heavenly6
kamniks 5 months ago
Reminds me theres a battle scarred blue frame that needs finishing in my closet somewhere.
kingkongbassbeat 5 months ago
good thing kamm that you had good experience dealing in hobbylink. mine was HORRIBLE.. very bad customer service. damage box/item, poor coordination.. very disappointing ><
macne04 6 months ago
@macne04 Im sorry to hear about ur experience bro.
kamniks 6 months ago
what is the song in the video?
Majitsu 8 months ago
@Majitsu @TheEpicCake71 Unlimited Sky by Tommy Heavenly6
UnitEv3 7 months ago
Kamm you have got to do a painting tutorial
scorpion301 8 months ago
@scorpion301 hehe I will one day bro! If you check out my FAZZ WIP 07. I do some painting in that and offer my advice and stuff ^^ Hope thats ok
kamniks 8 months ago
What's the name of the song?
TheEpicCake71 9 months ago
i had to come back and look at it agian
bankai1981 9 months ago
I like this one too so email me I would like to buy them. valeriachicas@yahoo.com
MrErick2008 9 months ago
I also like this one so I would like to buy it from you so you can email me. valeriachicas@yahoo.com
MrErick2008 9 months ago
@MrErick2008 Emailed you bro :) didnt know you wanted this one too!
kamniks 9 months ago
can you tell me what brand of paint you used to color this kit ?
onelasttitan 9 months ago
@onelasttitan I use Citadel Acrylic paints mate :) available at Games Workshop. Hope thats helps!
kamniks 9 months ago
@kamniks thanks, unfortunately the hobby shop near me only carry testors enamel paint :D
onelasttitan 9 months ago
You hand paint better then I spray....
gunplanut 10 months ago
@gunplanut wow thanks for the kind words bro! ^^!
kamniks 10 months ago
@kamniks No problem, you do nice work. I hand paint my tanks and can sometimes see the brush strokes, even after thinning it down. I'm still trying to figure the right paint to thinner (water) ratio.
gunplanut 10 months ago
Dude your vids are helping me so much that my g-3 is almost done so far I made all the battle marks but I have to dry brush the whole kit, so thanks dude thanks
setsuna388 10 months ago
@setsuna388 hehe thanks a lot bro!... IM glad your G-3 is nearly done. Make sure to pm me when its finished ! I want to see it ^^! Thanks again bro
kamniks 10 months ago
@kamniks sure thing
setsuna388 10 months ago
man thats one damn fine gundam
bankai1981 11 months ago
@bankai1981 Why thank you! :)
kamniks 11 months ago
@kamniks your welcome but one question what is that thing sticking out from the sheild
bankai1981 11 months ago
@bankai1981 was soppoed to be a dagger that somone stuck into it ^^! doesnt look great though :(
kamniks 11 months ago
@kamniks it looks goodish i just didnt know what it was lol and now i know and knowing is half the battel
bankai1981 11 months ago
@bankai1981 hehe thanks bro. first time trying somthing like that. Def learnt my lesson on improving it now too ^^ thanks
kamniks 11 months ago
@kamniks thats the only way to learn :)
bankai1981 11 months ago
I can't get over the detail it's amazing great work 5/5
setsuna388 1 year ago
@setsuna388 Thanks a lot man! Much appreciated <3
kamniks 1 year ago
I think it fair to say that thats f*cking amazing. I really love the head by the way, great slash
EsenxGundam 1 year ago
@EsenxGundam Thanks a lot man. Thanks for commenting! ^^
kamniks 1 year ago
@kamniks Yeah that slash on the head is awesome lol.
trinityzaku 1 year ago
@trinityzaku Thanks mate, tried to think outside the box alittle ! ^^
kamniks 1 year ago
The weathering seems a bit uneven on the lower legs; the shins don't have enough scuffing on it to match the knees. The off-centre decal on the back also really gets under my skit. Other than these minor gripes, though, this is absolutely fantastic all around. Another a great work from Kamm!
CitrusJuicebox 1 year ago
@CitrusJuicebox Your the only one to notice that decal ;) good job citrus. I too was disapointed with it. Damn dry transfers! Also imagine the modelling kneeling and diving. Then imagine the shins hitting the floor. Not that your wrong, I do believe I should have weather the model a touch more, but tried to keep the damage relevant to its actions ^^ thanks for commenting.
kamniks 1 year ago
@CitrusJuicebox i dont think actual battle damage (as im sure is is supposta be showing) is gonna be even! lol the pilot isn't gonna try and make sure the damage looks right! so i don't think that the criticism you gave him on that was valid...
ithollywood32 1 year ago
@ithollywood32 Yeah, you're probably right. Panels can get replaced and stuff, too, so there's that.
CitrusJuicebox 1 year ago
your model is really great but the music is cringe-inducing.
ghostdein1 1 year ago
@ghostdein1 Thanks for the comment!, what music would you have preferred ^^ ?
kamniks 1 year ago
Like everyone said, it's so hard to believe it's hand painted!!! You have an airbrush, you should use that. Seeing how your hand painting is, you're probably awesome with an airbrush too! :D
Gomenchaiii 1 year ago
@Gomenchaiii haha I hate airbrushing.. even priming my models angers me! I enjoy hand painting it relaxes me. Even if it takes twice as many coats. Gotta enjoy the hobby right?
kamniks 1 year ago
@kamniks That's the first I heard!!!! I LOVE airbrushing. I like how the color slowly changes hehehe (I hate doing whites though because it's hard to tell), and it dries so fast! The only annoying part is cleaning, and when it clogs, I have take it apart for deep cleaning, and also the fumes. What paint to thinner ratio do you normally use for hand painting?
Gomenchaiii 1 year ago
@Gomenchaiii I guess because england is so cold, my garage is always subzero! Erm I thin by EYE lol which is terrible. Maybe somthing like 3 - 1 paint to thinner. Once i get the look of the paint i want i stop adding water ^^ guess its just wat im used to doing.
kamniks 1 year ago
@kamniks I do it by eye too but mainly 3:2 for me. I still get annoying brush marks and white gives me heartache. Lol
Gomenchaiii 1 year ago
Outstanding work Kamm. Great weathering and some incredible hand painting.
GundamAustralia 1 year ago
@GundamAustralia Thanks Sonar. Much much appreciated :D
kamniks 1 year ago
if anyone dislikes this video they are dicks
darkwolf21100 1 year ago
@darkwolf21100 hahahaha love it. Thanks for the support man ^^
kamniks 1 year ago
Its awesome! Greatest paintjob and mod i ever see!!!
sebaale91 1 year ago
@sebaale91 hehe im sure its not the grestest bro! but thanks anyway :D
kamniks 1 year ago
Great jobits just amazing the things u can do with a brush
albertoxFTW 1 year ago
@albertoxFTW haha thanks man, just far too much time on my hands I guess ^^ Thanks for commenting Alberto.
kamniks 1 year ago
Awesome paint job on this one!
Nice use of the HLJ colours, and a really cool scheme you made with them. It really suits the cool design of the Mk. II IMO.
The battle damage gets my thumbs up as well.
You have my utmost respect for being a brush painter!
AriesTheUmpteenth 1 year ago
@AriesTheUmpteenth Thanks Aries! Much appreciatd. Im finding that the colour scheme is diving people ^^ I tried my best to encorporate the HLJ colours. Thanks for the kind words!
kamniks 1 year ago
I really dont see how you get it so smooth by brushing. Thats awesome. I love the scar on face and bullet holes.
Its pretty intimidating and here we are doing kits together. We are going to change the world, hahahehe. Very good work.
jumpingspoon02 1 year ago
@jumpingspoon02 I use cheats! haha lots and lots of layers homie. Everyone loves the scar, im glad I could pull it off. We care going to change the very fabric of existance with our FAZZ collab bro. Thanks for the feedback Jamie
kamniks 1 year ago
Great work Kamm, love the battle damage and paint scheme, I'm sure HLJ will be more that happy with this fantastic custom MK II.
tc012009 1 year ago
@tc012009 Appreciate it TC. I hope they like it too. Overall im not that happy with it.... what would usually take me 2 months took me 1. I soppose the pressure got to me as im so inexperienced. "doh!" Thanks again!
kamniks 1 year ago
WOW! Definitely amazing but how did you figure this is their color scheme?
josiebeara 1 year ago
@josiebeara hehe thanks man. I made a mock plan in photoshop for the idea. At the moment some people like it, some people hate it ^^! I guess we shall see what HLJ have to say. Thanks for commenting
kamniks 1 year ago
You never cease to amaze me Kamm, wonderful BD work! Definitely HLJ colored!!! What do you print on for your custom water-slides? Only CC I got is a nice flat top coat would hide those decal edges, other than that this is fantastic!!! Love the destroyed leg thruster armor reveling the inner frame and HLJ will looooooove it too or they are crazy! Also what are those things on the head?... Radio transmitter?
GundamGuns 1 year ago
@GundamGuns GG! ^^ I use clear inkjet water slide paper (il pm you a link. Cant seem to link in this comment!) I completely agree with you on the Decal an top coat. Im still learning to get the decals to sit how I want them (didnt want to use this model as an experiment) :P Thanks for the great feedback and the head thing is a transmitter lol yeh! :D
kamniks 1 year ago
WOW!!!!!!!!!!!!! BEAUTIFUL WORK KAM!!! man i cant say enough about your work man! stellar job dude! is this kit for hobby link japan?
SNEEPER1980 1 year ago
@SNEEPER1980 haha thanks a lot sneeper :D thanks for taking the time to comment. It means a lot. This kit was "commisioned" by hobby link japan hopefully will be on there website soon.
kamniks 1 year ago
@kamniks its good to see you involved with HLJ! i love that site! and your work is very impressive and to believe its all done handpainted!
SNEEPER1980 1 year ago
@SNEEPER1980 Thanks a lot sneeper. I just hope they like the tutorial and model!
kamniks 1 year ago
well the hand painting assassin has done it again hlj is going to be over joyed with your work on this kamm great work
blackchimera9 1 year ago
@blackchimera9 Thanks for your continueing support chimera. Im glad you like it! Im having some mixed reviews at the moment ^^
kamniks 1 year ago
Awesome 5/5!!!
Wish i had the skills to do that much >.<
AsianDelinquent 1 year ago
@AsianDelinquent Thanks man, im sure you do have the skills. Just takes a little bit of patience ^^
kamniks 1 year ago
you're battle damages are awesome!!!!!
Waffle164 1 year ago
@Waffle164 Thanks man ^^ I made a basic tutorial on my channel. When you get time check it out. Let me know what you think
kamniks 1 year ago