I don't understand I can't seem to break 3.1ghz, which is lame, I once booted at 3.2 it looked super stable, I ran full load for several minutes, but then I tried to increase clock again, and that was the last time I made it at 3.2, I had to go back lower. I don't think it's a temperature issue, never gone beyond 45/46
I've got a c2 stepping and I can hit 3.4ghz @ 1.25vcore, 3.5ghz seems to need more but I'm running stock cooling, later though, I'll push it to the limit.
@Marosaru201 What motherboards are you using I cant take mine further than 3.450 in 3.600 the screen freezes after some minutes could it be the volts please help here guys
I've got an athlon II x2 245 at 3.77Ghz with a huge masscool heatsink. But I can't seem to get it to run any higher? Any tips on which settings you used to get it to 3.9? Are you using air, or water cooling?
no but the one i was using wasnt much better.i have since upgraded my cooling and was able to achieve 3.9 @ 1.5volt still a little higher than i would suggest running for more than a few hours.
what is that background music?
bobctx 4 months ago
I don't understand I can't seem to break 3.1ghz, which is lame, I once booted at 3.2 it looked super stable, I ran full load for several minutes, but then I tried to increase clock again, and that was the last time I made it at 3.2, I had to go back lower. I don't think it's a temperature issue, never gone beyond 45/46
Quentin88pkt 5 months ago
а как разогнать проц вить биось на английском а я украинкий токо знаю
TheVadiminator 8 months ago
This CPU... i can get 3.3GHZ with stock cooling and low voltage Working for long hours straight. Very good processor :)
juanma9112 1 year ago
you lucky bastards , I can't even go more than 3.5 ghz with my x2 250
BudgetGaming 1 year ago
@BudgetGaming same here I think is our motherboards
EdwinXVS 1 year ago
i used this cpu
the original speed core is 2.9Ghz It's fast for me
sittporn19 1 year ago
I've got a c2 stepping and I can hit 3.4ghz @ 1.25vcore, 3.5ghz seems to need more but I'm running stock cooling, later though, I'll push it to the limit.
shuffman37 1 year ago
your sample isn't so good, you hit 3.9ghz with 1.6vcore. I've god one with 1.35vid and achived 3.9ghz 100% stable and use daily and 4ghz for bench.
Marosaru201 1 year ago
@Marosaru201 ya Ive seen people get a lot better results with this cpu every one of them varies.
Zfriet 1 year ago
@Marosaru201 What motherboards are you using I cant take mine further than 3.450 in 3.600 the screen freezes after some minutes could it be the volts please help here guys
EdwinXVS 1 year ago
@EdwinXVS I was using a ASRock M3A785GXH/128M AM3 AMD 785G HDMI ATX AMD Motherboard at the time.
Zfriet 1 year ago
@Marosaru201 I've gone 4Ghz with stock fan and 1.36 Volts :D 100% stable
wowaccpass 11 months ago
What overclock program is that?
devan12100 1 year ago
CPU bus on 270 !, you can run DDR3 on 1800mhz or if you have a nice AM2+ motherboard in 1200 or 1300mhz DDR2
MHAKP 2 years ago
I see some tube here. Is it water cooling?
Michkolud 2 years ago
I've got an athlon II x2 245 at 3.77Ghz with a huge masscool heatsink. But I can't seem to get it to run any higher? Any tips on which settings you used to get it to 3.9? Are you using air, or water cooling?
wicky615 2 years ago
is this an overclock?
dont athalons come at 2.7?
cokacutter 2 years ago
@cokacutter LOL
strazula 1 year ago
stock fan?
jlpogi23 2 years ago 6
no but the one i was using wasnt much better.i have since upgraded my cooling and was able to achieve 3.9 @ 1.5volt still a little higher than i would suggest running for more than a few hours.
Zfriet 2 years ago