spyder vs1 tips tricks and upgrades part 3 of 5

[djmsamson92]

ARE HALO HOPPER GOOD FOR WOODS BALL?

[countryboysrock14]

Hey man i have a vs1 like ur i wont a new feed neck and asa and drop fowed what do u thank i should get and how to get the stock feed neck off and im geten a new bored what would u recamed me geten

[sjking92]

@countryboysrock14

I ususally refer everyone to ANSGEAR.com

The navigation of the page is very easy. You're looking at paying about 50$ for all the upgrades + some shipping

[paintballuh101]

thats a cp aint it twist in is on twist out is off damn ur stupid

[paintballuh101]

jdumb ass u dont know shit about this sport or how they work any decent gun comes with a form of a clampin feedneck



[garciagungfu]

when u have the vl 200 and u do the trick can you turn it up side down and not fall off

[sjking92]

@garciagungfu

[conman96293]

can you use co2 on a s1 and a vs2 and a vs3

[sjking92]

Yes, Yes/No, NO!

[xsvlp39]

How do yu remove the stock feed neck mine seems to be welded on ( or it's just screwed on really tight) how do I get it off and what kind of claming neck to I need like do I need a ceritain brand or modle or what

[sjking92]

@xsvlp39 Use ALOT of force. ALOT. You will need to get an "ion threaded feed neck" if you are able to get it off. I used a vice grip, and it tore the stock feed stub up before it budged.

[Mr1233556]

@xsvlp39 suck a cock :)

[llcooljohn24]

ill take ur ion if u dont want it

[30stickyicky30]

the part where i screw my feed neck in got stripped and i have to use super glue to glue the adapter on and my hopper.

[sjking92]

@30stickyicky30 Try rebuilding around the base of the feedneck, making a thick layer for support. Try using liquid cement or plastic epoxy or any thing of the sort. but be sure to mold it.

[cscopter]

but i got the gun for $30 and

the board for $30

[sjking92]

very nice. I got mine the month it was on shelves at my local PBmart

[cscopter]

i also ordered a tadao board for the frame

[sjking92]

With all of this money you are spending on the gun, you could have bought an Azodin Zenith. It alrady has all the modes you could need for tournaments. and its like 215.99

[cscopter]

when it says two point adjustable trigger how do you adjust it do you use the wrenches in the spare parts kits?

[cscopter]

how do you adjust the trigger on the spyder vs1

[sjking92]

i would recomend just buying a new "Spyder Vs series trigger" from ANS gear, because it only has 1 point for adjustment, a little screw on the face of the trigger. Generally you want the trigger to stop moving the second it fires, so you want to screw it in. also You want it to only have a couple of MMs of pull. so pull the trigger untill right before it fires and that is where the trigger needs to rest. how you keep it between those two points is up to you. i just ghetto rigged mine

[b4stocks]

how to you take the original feedneck off

[sjking92]

with ALOT of force. you twist it off like a bottle cap. i mean ALOT of force. I used a vice grip and i tore the teeth of the vice grip and the feed neck.

[b4stocks]

Now, will there be damage like scratches and how can i use the same setup from doing that to put my loader without the honking huge tower on

[sjking92]

@b4stocks

There will be ALOT of scratches, but only on the feed neck wich you will not need anymore.

to use your same set up, you will need to remove the feed neck that comes stock on the vs1, and buy a new "clamping feed neck, spyder/ion threaded feed neck"

[noobslayer5000]

is ther an adaption for a vs2 to put a stock on

?????

[sjking92]

I dont think so

[p41ntb4l13r]

you hav all these videos, why dont u make one of u and ur "team" playing

[sjking92]

our team disbanded some months back due to people leaving. Im doing woodsball now and milsim, also due to our homefield's airball court being taken down

[Laxfn63]

my preference would be clamp then barrel, thats just me tho

[sjking92]

good point. its either wobbly and top heavy, or inaccurate. Both would bother me

[kcbros151]

can any clamping feedneck work for vs1

[sjking92]

no. it has to be ion threaded feedneck, or vs1 threaded (but the ion is cheeper)

[kcbros151]

can a rotor fit in the feedneck??

[sjking92]

i personally would not shoot with a rotor, those loaders are ment for ego 8+, and dye 8+ that are capible of shooting 50 BPS (as fast as the loader loads)

But yes, it will fit. all high/mid end loader's feed neck port are made bigger than most feednecks so you can sand them down to size to fit your feedneck.

[kcbros151]

well if it works on the egos and dm8 it shouldnt face any problems with an amucher gun like the vs1 right...

[sjking92]

yeah, it should work.

but its like using a neculear wepon on a couple of people in war,,, when you can send in a 3 man team to take them down.

[kcbros151]

yeah.. but im doing it just in case if I ever upgrade to a diffierient gun I wouldnt have to worry about buying a new hopper for the gun.

[sjking92]

ok. be sure to set the rotor to 20 bps, or you run the chance to chop paint

[elblink1fan]

Did you use the original Vs1 Macroline or did you purchace a longer one due to the drop?

[enterx9]

Fucking noob.

Holy shit.

If your uncle works at smart parts then ask for a fucking shocker. Even tho Smart Parts is a piece of shit company, its better then a 11 bps vibe.

Lmao.

Stop embarrassing yourself and stop making videos...

[sjking92]

He could not get a shocker, all he could get was a sp1 and vibe.

you dont think i asked for a shocker?

[fmlax8]

what feed neck do you have

[tye281]

Hey , would you reccommend a J&J Ceramics barrel for the vs1? (14")

[sjking92]

yes,,, for its price/accuracy comparison

[trooperx666]

how would the green vs1 look with a silver barrel lol

[sjking92]

bad

[gabefan41]

I am going to buy a spyder vs1 and i wanted to know what kind of hopper i should get???

[sjking92]

Low budget- Archon gravity hopper (one i talk about in later videos) 9$

Mid Budget- halo TSA 20$

High Budget- Empire B 50$

Pro Budget- JRNY Hopper 200$

[btownpb]

I'd suggest for you a Torque loader. Not sure of the exact cost, but it is relatively cheap and has a pretty good feed rate.

[sjking92]

whats your price range?

[llDJTREYll]

How do u get the little green feed-neck thing to screw off? mine is like stuck on there. I've tried twisting it off with pliers and that didn't work...

[sjking92]

experiment with a vice grip, monkey wrench, wrench, strap wrench.

i put the strap wrench on the feed neck, then wrenched it tighter, then got the monkey wrench and wrenched the two handles on the wrench together then used the vice grip for my hand.

[Bryanq4]

im going to buy this gun and i was wondering does this have a velocity adjuster

[sjking92]

yes it does, its located at the rear end of the gun right under the bolt

[jsncirca]

have you installed a virtue chip on your gun vs1

[sjking92]

i actually traded that gun for a brand new proto matrix rail.

but it did have a virtue board

[b4stocks]

how the **** did you get a 500$ gun for thes crappy little things

[sjking92]

used, and i traded my old Ibook g3 with it.

[bensta123321]

when it is screwed down it it on when there is a gap it is off

[llDJTREYll]

Just purchased this exact gun. All stock. I am on a pretty tight budget so i was wondering wut u would upgrade first?

[Cola777333]

Get a new feed neck, then a new barrel

[bluepoo18]

thanks

[bluepoo18]

with a HPA tank do u need a low presure output or high presure

[sjking92]

im assuming your talking about the vs1, go HP output

[paintballwanttobe]

were did u get your asa i need 1

[phungsta]

can u use c02 with a macro line?

[sjking92]

single macro line, yes. more than one, no. thats why spyder vs1's can.

[phungsta]

what do you mean single macro line?

[sjking92]

the line is what goes from your asa to your regulator. thats the one on the vs1. but other better, more high end guns have more than one, like up in the body.

[gooferman609]

if your talking about an autococker with the tubing on the front block your off, you macro is the one from the ASA to the reg, thats different tubing up there and its fine to use co2 with macro.

[sjking92]

nope, they dont use macro (not alot) im talking about the ion with the macro inside the body and some other highend guns (and other comments, i suck at english)

[hurley2795]

i got a Vs2 what clamping feed neck should i get

[sjking92]

get the one from ANSGEAR>COM, its really cheap for a feedneck that wont wobble, it fits many hoppers and you only need to grind a halo B. its like 30$

[Dennon21]

hey i have a spyder pilot 08 can you please give me a list of all the ups i could get?