Especially when it's a fast one-two, like a double tap. To avoid the extra fun, try applying lube to both the wheel (bead lock segment) and the tire bead. This may cut down on the need for new underwear. Thanks for visiting.
Hmm, I was expecting a very loud pop near the end there as one would expect from those low profile tires. I hate working on those tires as it's so difficult to put on and take off and that big loud pop noises often scares the crap out of me if I wasn't paying attention to it.
Current price (until end of year) is $15900 with the arm, includes shipping, setup and training (US). If you do a lot of run flats or even low profile tires, the arm is worth it, saves a lot of time and labor.
Wish I had a little camera on my shoulder every time a BMW mechanic tells me how great the Corghi Artiglio Master works. Especially saves you guys time, hence increases your earning capacity, and reduces the chances of injury. You also don't have to wait for two other guys to help you tire bar the RFT off a rim clamp machine. Thanks for the input.
If you have been unhappy with the way the machine works, than it's not your fault, but the fault of the individual who did not train you. Honestly, we recently re-trained an artiglio owner who was really dissatisfied. A week later when he had just done a set of BMW runflats, he wanted to give me a hug because now the machine worked for him. Training is 90% of any tool. Let us know if we can help.
@Sperformance You will find that killthebatman is either from the UK, Australia or NZ. When he says that it is A piece of piss to use, he is NOT saying that it is of poor quality or that it is difficult to use. What A piece of piss means in these places is that it is Very easy. So killthebatman is saying that this machine is very easy to use and that he probably likes it. It can be difficult to keep up with the slang in different countries.
Yes. The 26" in 60 seconds was referring to a different video we have posted. The largest Vredestein we have dome is 22" I believe. Perhaps you know my friend Michiel Kramer.
Depending upon what you are driving...........about two hours. I think 133 miles. We are just below the TZ Bridge, near the Hudson River. We just added another Artiglio machine, a baby master, the AM50. Allows for 30" wheels and 48" tall tires.
Especially when it's a fast one-two, like a double tap. To avoid the extra fun, try applying lube to both the wheel (bead lock segment) and the tire bead. This may cut down on the need for new underwear. Thanks for visiting.
Sperformance 3 days ago
Hmm, I was expecting a very loud pop near the end there as one would expect from those low profile tires. I hate working on those tires as it's so difficult to put on and take off and that big loud pop noises often scares the crap out of me if I wasn't paying attention to it.
PorcelainShrine 3 days ago
Thanks for checking it out. Customers in the NY Metro area are invited to stop in and see the machine.
Sperformance 2 months ago
+1 for "the story" :D
einstein69tr 2 months ago
Current price (until end of year) is $15900 with the arm, includes shipping, setup and training (US). If you do a lot of run flats or even low profile tires, the arm is worth it, saves a lot of time and labor.
Sperformance 2 months ago
Hey man how much was the machine with the articulating arm?
Retrospectx9 2 months ago
NIIICE! No metal EVER touched the rim.
tazztt1 2 months ago
GRRRRRRR...PSSSSS...PSS..PSS..WROOOOOOMMMM...GRRRR....PSS..PSS...ZZZZZZZZZ...SSSSSSSSSSSS...PFFFFFFFFFF...SHHHHHH..T..T..T..T..T..T..T..
FINISH !!!
CanijAsa 2 months ago
I'll like to get a little dirty, let' s everyone know I work for a living too! Thanks for watching.
Sperformance 3 months ago
amazing he even gets his hands dirty
marineyacht 3 months ago
Thank you for the kind words. If you check out Corghispa, and CorghiUSA they now have some really good videos, more instructional than I did.
Sperformance 4 months ago
Nice video
spencer82rocks 4 months ago
Great Machine. The dealership I work at (bmw of course) has one and I use it daily. Makes putting RFT's on a piece of cake.
mk2mike 7 months ago
@mk2mike
Wish I had a little camera on my shoulder every time a BMW mechanic tells me how great the Corghi Artiglio Master works. Especially saves you guys time, hence increases your earning capacity, and reduces the chances of injury. You also don't have to wait for two other guys to help you tire bar the RFT off a rim clamp machine. Thanks for the input.
Sperformance 7 months ago
wow that was fast and easy :P
jeffzahnd 1 year ago
285/35R20 RE070R GT-R R35
h123305033 1 year ago
We can do that on this machine, easily.
800-227-6965
Sperformance 1 year ago
That machine is a piece of piss to use
kilthebatman 2 years ago
If you have been unhappy with the way the machine works, than it's not your fault, but the fault of the individual who did not train you. Honestly, we recently re-trained an artiglio owner who was really dissatisfied. A week later when he had just done a set of BMW runflats, he wanted to give me a hug because now the machine worked for him. Training is 90% of any tool. Let us know if we can help.
Sperformance 2 years ago
@Sperformance You will find that killthebatman is either from the UK, Australia or NZ. When he says that it is A piece of piss to use, he is NOT saying that it is of poor quality or that it is difficult to use. What A piece of piss means in these places is that it is Very easy. So killthebatman is saying that this machine is very easy to use and that he probably likes it. It can be difficult to keep up with the slang in different countries.
Pwn00b 1 year ago
Yes. The 26" in 60 seconds was referring to a different video we have posted. The largest Vredestein we have dome is 22" I believe. Perhaps you know my friend Michiel Kramer.
Sperformance 2 years ago
I working by vredestein in holland the biggest size is 24'' of this tyre ultrac sessanta
sincap09 2 years ago
Check out the 26" tires we did, about 60 seconds or less.
Sperformance 2 years ago
Those are some beautiful tires and that machine is super fast!
kennethgabriel 2 years ago
yeaaaaa
MAXSTUNNA 3 years ago
anywhere near albany?
heraldosaid 3 years ago
Depending upon what you are driving...........about two hours. I think 133 miles. We are just below the TZ Bridge, near the Hudson River. We just added another Artiglio machine, a baby master, the AM50. Allows for 30" wheels and 48" tall tires.
Sperformance 3 years ago