You can disconnect and reconnect (after about 10 minutes) the car battery in your vehicle’s engine compartment. You can just take one of the cables off for couple of minutes and put it back on. This works the same way as restarting your computer. It should help to clear minor “bugs” in your keyless or electrical system.
Now, please follow the activation procedure for the remote again.
Please also check if the vehicle was equipped with keyless system
I have 2004 Nissan Xterra I did same thing lock the door first like the guy say didn't work, so I try with out locking the door insert the key 6 times bingo Works. Nissan maxima guy you should try with out locking the door good luck
i did bought a new remote ... for my 2006 altima... and i have tried many ways to program and it will not work like the signal lights flicker and all but when i open it the remote wont work HELP !!
I have a 2005 Nissan Altima, I lost my keys and had to buy a new Keyless entry remote. Is the process any different if the car is alarmed before initiating the reprogramming?
I bought similar keyfobs from another seller. The written instructions seemed a little confusing. I gave it a try and it didn't work. Watching your video and the way you did it, showed me I was going too slow and I probably wasn't inserting the key enough times. Great job!!
I bought similar keyfobs from another seller. The written instructions seemed a little confusing. I gave it a try and it didn't work. Watching your video and the way you did it, showed me I was going too slow and I probably wasn't inserting the key enough times. Great job!!
@carandtruckremotes thank you so much i need to corect you because you said it works on 06 and older well i tried it on my 2011 sentra and it worked perfectly thanks so much i appreciate it i was about to go to nissan and have them program the controllers for 40 bucks
do you need the standard nissan remote
ChurchBoyyDonnie 5 days ago
Will this work for Nissan altima 2009 thank you
alexc206 1 week ago
Will dis work for my 09 Nissan versa?
55551891 1 month ago
You can disconnect and reconnect (after about 10 minutes) the car battery in your vehicle’s engine compartment. You can just take one of the cables off for couple of minutes and put it back on. This works the same way as restarting your computer. It should help to clear minor “bugs” in your keyless or electrical system.
Now, please follow the activation procedure for the remote again.
Please also check if the vehicle was equipped with keyless system
carandtruckremotes 1 month ago
will it work on x-trail 03 4x4??
mfyulo70 1 month ago
Hi, i tried in my nissan pathfinder 2003 model and didn't work...can you help me?
donmacro0002 2 months ago
Comment removed
donmacro0002 2 months ago
Thanks for the posting!
fercho23 3 months ago
Just tried this on my 2005 sentra and it did not work. Looked up other procedures and found one that was very similar and worked. Very Simple.
mteixeira63 3 months ago
@mteixeira63 if you dont mind can you send me a link because i have the nissan sentra 2004 model
SixCombat 1 month ago
Thanks
quevivaGuate 3 months ago
I have 2004 Nissan Xterra I did same thing lock the door first like the guy say didn't work, so I try with out locking the door insert the key 6 times bingo Works. Nissan maxima guy you should try with out locking the door good luck
alx2979 3 months ago
i did bought a new remote ... for my 2006 altima... and i have tried many ways to program and it will not work like the signal lights flicker and all but when i open it the remote wont work HELP !!
eddielightzz 4 months ago
2007 M35 only has push ignition. What's the process?
holcolater 4 months ago
2004 Nissan Titan, worked perfectly. Thanks!!
brew13 4 months ago
just did this in my 2000 Maxima and it works!
yellofury 5 months ago in playlist yellofury's Favorited Videos
The same programming applies in every case for your 2005 nissan altima remote
carandtruckremotes 5 months ago
Those video shows how to program the remote only. Key must be cut and programmed by nissan or car locksmith
carandtruckremotes 5 months ago
So you buy the key and get it cut, then do this ?
inkmonster0u812 5 months ago
I have a 2005 Nissan Altima, I lost my keys and had to buy a new Keyless entry remote. Is the process any different if the car is alarmed before initiating the reprogramming?
Ruthless2481 5 months ago
I am afraid it will not. Those are instructions for Nissan not Mazda.
carandtruckremotes 5 months ago
Will it work on my 1994 Mazda mx6?
BlakesOG 5 months ago
grate video it did help a lot thank you so much for awesome video.
vicline80 6 months ago
sweet it really works for my 96 max! $130 my butt u can suck it nissan dealers!
tpgta14 7 months ago
Yes It Worked Thanks really Appreciate this
xKnightAssasinx 7 months ago
Wow thanks worked for my '04 Nissan Xterra.
Waye7 7 months ago
This has been flagged as spam show
I bought similar keyfobs from another seller. The written instructions seemed a little confusing. I gave it a try and it didn't work. Watching your video and the way you did it, showed me I was going too slow and I probably wasn't inserting the key enough times. Great job!!
BrushWrks 8 months ago
I bought similar keyfobs from another seller. The written instructions seemed a little confusing. I gave it a try and it didn't work. Watching your video and the way you did it, showed me I was going too slow and I probably wasn't inserting the key enough times. Great job!!
BrushWrks 8 months ago
How i can programing my key for Nissan ALmera 99?
spedred 9 months ago
will this work on my micra 98 si ?
Civicboy1991 9 months ago
This worked like a charm on my 1996 Nissan Maxima!
Thank you so much for the video :)
ty2k00 9 months ago 2
Worked on a 2004 maxima ty
MacCole7011 9 months ago
i want to know how to do it for nissan exterra please let me know thank you
josephalsayegh 10 months ago
is this will work on 95 nissan sentra?
pccell300 11 months ago
Worked. Also check ehow.com
Ry2009Ry 11 months ago
thank you!!!!!!!! just safe me $100 from the stealership!!
rocajl34 11 months ago
Thanks!! I had my old car keys from a sentra and tryed it on my 2006 sentra SE-R spec and it worked!! Very helpful video, save me time and cash!!
SOLID117x 1 year ago
Yes, it will work provided your Altima was factory equipped with keyless entry system.
carandtruckremotes 1 year ago
@carandtruckremotes thank you so much i need to corect you because you said it works on 06 and older well i tried it on my 2011 sentra and it worked perfectly thanks so much i appreciate it i was about to go to nissan and have them program the controllers for 40 bucks
John37816 11 months ago
What if it fails? how would i start the process again? do i need to disconnect the battery?
batavias 1 year ago
will this work for a 2001 Nissan Ultima GXE?
batavias 1 year ago
what about a 1999 altima?
ZooPv2 1 year ago