Marine Ciras/ Loadout

[hawaiinationalguard3]

Airsoft??



[A1rsoftMH88]

@hawaiinationalguard3 made for airsoft but has the right dimensioned slots for the strike face ceramic plates.. i was up at camp pendelton a while back and tested that out

[hawaiinationalguard3]

@A1rsoftMH88 Awesomeness!!!!!!!!!!!!!

[123mcguyver]

it looks weird...ive...never seen a large person in marine fatigues 0.o

[Arostyle380]

What kind of helmet are you using in this loadout?, I didn't catch what you said.

[almostmarine]

Dude stop pretending and just join the military already

[zachfresh]

@almostmarine Really damn lol

[TJkiwiOWEG]

@almostmarine he's too fat. he would be in a PCP program the entire time

[TJkiwiOWEG]

@almostmarine he's too fat. he would be in a PCP program the entire time

[julianabrielle]

Nice. Filipino Pride. ASTIG PRE!

[MGOFadeToBlack]

hmm ur the only person that makes real looking load outs cool still i play paintball there both fun

[MobiusInfinity117]

thats a small helmet...

[mastakillacz]

Oh czech flag!

[USSEntrprise]

nice!

[wllmknight]

or you could enlist..... just saying

[A1rsoftMH88]

@wllmknight every time Im on base friend bugs me to join> it is a thought

[McRj117]

nice

[TheyCallMeBadCompany]

what is the vest made out of

[A1rsoftMH88]

@TheyCallMeBadCompany Cordura

[mercturd85]

where did you get the rig and the serpa?

[A1rsoftMH88]

@mercturd85 i bought the serpa off a friend. You can find them on Black hawk.com they go for 130.

[nick123abcd]

you look sick!

[A1rsoftMH88]

@nick123abcd Thanks

[bludspilguy]

Nowadays i run a woodland marpat loadout. I wear a M88 PAGST helmet with a marpat cover. sometines ill wear an od shemage. i wear a FROG tactical combat shirt with 2 IR od flag patches. for a vest i run a marpat modular plate carrier(MTV) with 2 double m4 mag pouches, a small admin pouch with a team patch, a usmc flight patch, a hydration carrier, a radio pouch, a magazine dump pouch, and 2 utility pouches. for a holster i have a tornado tactical thigh holster. i wear basic tru pants. NO RANKS!

[seabasscn]

where do u buy all this stuff from if you know that would be great haha well obvi u know but if u could tell me that would be great!!!

[A1rsoftMH88]

@seabasscn The cammies i got from my Marine associate from Camp Pendelton San Diego. other than that most of the stuff is from Evike.com , and my local shop Airsoftmammoth

[Buditokid]

hey i see ya got the acm ciras in tan version what did ya think its most better that vest or this version(in this vid)

[A1rsoftMH88]

@Buditokid The version i have is very bulky but its fits me very good because of my size. i bought the ACM version which is smaller and like a maritime is easier to maneuver in depending on your size i would go for the ACM. this is The MIlforce CIRAS vest which is like the eagle industries, but the outside of the eagle industries looks more like the ACM but the inside looks like the one i have with two internal cummerbund bands connected in the middle inner and outer

[SFFROGUNIT]

they have this vest at evike.com

[A1rsoftMH88]

@SFFROGUNIT this vest was bought from evike, but  now if you go there to buy this one they may give you another version which is not as heavy duty.

[Snowboards1212]

lookin beassst

[airgearhog777]

you are right but a belt has its limits if everyone had belt airsoft would not be as cool

[datseb997]

ehh 130 for a replica vest id rather get the real thing

[airgearhog777]

@datseb997 the real thing is like 500$ to 600$ if you have the money cool

[joyride47]

i no longer play airsoft but all that ur wearing is stupid. the lighter the better for airsoft. u dont need armor at all a simple belt with mags is what i ran. i had a classic army cqb m4 and usually ran a glock side arm. all mags were kept on a belt because thats all u need. gear queers lol

[A1rsoftMH88]

@joyride47 Theres a difference between, Paintsoft and Milsim Airsoft. Remember that. Big Hint : Belt With Mags

[dgg1994]

@joyride47

Enjoy drinking nothing when out on a op for 8 hours bucko.

Remember, airsoft is MILITARY SIMULATION.

[zreau]

That SERPA is way high up there!

[A1rsoftMH88]

@zreau yea it was, i took it off and put it on a Blackhawk Drop leg platform now

[noopklu]

were did you get those goggles? :D

[A1rsoftMH88]

@noopklu  AirsoftMammoth in Simi , FLAKJAK goggles

[noopklu]

@A1rsoftMH88 awsome thanks 4 replying!

[fanofCOH]

@noopklu any good airsoft store carries them online. arena flakjak's

[mdrrdm426]

Sorry dude I accidently hit the dislike button, I hit like for you too though. I really didn't mean to. I'm not going for a marine loadout, but I would like woodland marpat camo. Would it look okay with a black plate carrier? Because I really don't wanna pay another 100 bucks for a tan one.

[A1rsoftMH88]

@mdrrdm426 yea it would look good. i see many who wear black vests with woodland marpat its just mixin up what you got. and its ok about the dislike button push.

[ReconCompany1]

dude how small can you get that vest to go cuz im pretty small...

p.s saw you at jericho MICK

[A1rsoftMH88]

@ReconCompany1 well if you saw that kid wearing the goggles in my other vid he is wearing the same vest just in black and it can be adjusted to a very small side but there will be some Molle Loss due to adjustment and it will be a bit more bulky

[ReconCompany1]

@ReconCompany1  im 4 ' 8 soo i still dont know

[mdrrdm426]

@ReconCompany1 Try the Condor/OE Tech Spec Ops plate carrier. It's a compact plate carrier so it's pretty small and you can get in on airsoft gi. Also, watch this video on it by Islanderboy1, he shows a little trick to make it fit even better that I haven't seen anyone else show. youtube.com/watch?v=_gh4lW6dSj­I

[2015DevilDog]

nice loadout dude but im not sure if the marines use that style of vest. i could be wrong tho. all the marines ive seen use the coyote tan interceptor body armor.

[buckman2011]

Dude, sick load out Man. I love that vest, I want to get that vest so bad, is it any good? You win the contest dude. Can you also put armor in there?

[A1rsoftMH88]

@buckman2011 yea, the vest is amazing. now i adjusted to the point of perfectness. yea and it actually has places to put SAPI plates or fake ones. with fitted pockets. very comfortable.

[buckman2011]

@A1rsoftMH88 Thats awesome, I want to get that vest SOOO bad, thats deff the vest I'm gettting. Dude, you look so freaking beast, your load out beast any I've seen. Does that vest have a quick release system?

[A1rsoftMH88]

@buckman2011 yea it has, a quick release. its not needed but its awesome to have. ;D

[buckman2011]

@A1rsoftMH88 Nice, ok thanks dude.

[jboiiGOGO]

bro sick ass load out i think urs is the best out of any iv seen nice bro and i wanna know how do you get your hollster on your chest goin side ways??? plz wright back

[A1rsoftMH88]

@jboiiGOGO thanks man, well you can buy a blackhawk molle hook on but i just took the paddle which comes with the Serpa and hooked it to the admin pouch and put it through the Molle. i used a hard piece of cardboard in the admin pouch also to give it stiffness. it works pretty well but i stopped using it on my vest and now just use the Blackhawk Drop leg for my M9

[bobotea1234]

nice i run the same loadout except with a OD CIRAS, up here in Canada CB isnt that great.

[A1rsoftMH88]

@bobotea1234 coo :D

[PMAN46]

does this fit 5'5 people?

[A1rsoftMH88]

@PMAN46 Yes it will but you will need to adjust the vest, and maybe add some holes for the straps on the inside of the vest. the whole vest is connected by one wire. so you may pull the wire so it will fall off after pulled.

[tvillalobo]

Hi, do you know where we can find the Maritime version of that Ciras ? Thx

[A1rsoftMH88]

@tvillalobo actually yes, I hade the maritime version before I got this one by trade. Evike has them but in minimum quantity, because they switched to these. But you must go there in person or ask if they still have it by phone. Hope this helped

[SweAbn11B]

Buy the real deal instead of supporting chinese industry. They STEAL the design from US manufacturers who have spent hours and dollars in research, development and testing for this stuff to be the worlds finest for the worlds finest.

Support that!!

Or do you want to give your money to the worlds largest communist dictatorship?..

[A1rsoftMH88]

@SweAbn11B Definitely not want to give my money to a communist dictatorship, I must get a Pantac or Eagle Industries some time soon.

[SweAbn11B]

@A1rsoftMH88 I would advise you to go for the Eagle one. They developed it after all! Not sure where Pantac is sewing their stuff, but my guess is PRC or ROC.

Just to make it clear to any others reading this, i'm not interested in pointing fingers or anything, i just want to raise the question about western inventions being "stolen" and reproduced in Eastern Asia and sold back to westerners. These companies make alot of money producing UNAUTHORIZED/UNLICENSED replicas.

[XxBESTEVARxXz]

Did it come with plates?

[A1rsoftMH88]

@XxBESTEVARxXz no it does not, it comes with some foam inserts all the way through.

[airsoftowns42]

how many pouches does the vest come with

[A1rsoftMH88]

@airsoftowns42 it comes with 10 m4/m16 mag pouches, one admin pouch, 2 pistol mag pouches, a hydration pack, and one radio pouch.

[USMCole]

I got one at Evike for $260. I guess they cut the price in half. But I think it was worth the money anyway. This is a great buy.

[complicatedasnumbers]

where did you get the plate carrier

[A1rsoftMH88]

@complicatedasnumbers Ciras vest was purchased at Evike but they are sold out of this one, and i believe they have another one called the ACM Ciras. look up that name in google and check out the pictures you will see it there

[KaoVSMogiz]

@A1rsoftMH88 yay they restocked!!!!

[bernsan443]

I'm a mens larrge

[A1rsoftMH88]

@bernsan443 it will be perfect you just have to adjust it, from the back opening with the single cord hook on

[bernsan443]

Ok thanks definitly going to buy it

[A1rsoftMH88]

@bernsan443 I promise you wont regret it, oh and what is your size in clothing by the way, it has to do with adjusting it

[bernsan443]

Yeah I saw the video.

Is it hard to put back together after you pull the release?

That was my last question,I'll stop bothering you now

:)

[A1rsoftMH88]

@bernsan443 No not at all, maybe the first time. but its pretty much easy, just before you pull it open the back up to see how it is all hooked together, and with this vest you have three choices to where to put the pull tab.

[bernsan443]

The vest is still ciras right?

The system looks realy cool!!!

[A1rsoftMH88]

@bernsan443 Yea, it also has a safety release to pull. i should really show that function well i have a video of my friends Ciras release being pulled also

[bernsan443]

U just made me want to buy this more.but first I got to get my dad to buy this so I can pay him back one day.......lol

Thanks for the info

Btw inoticed ur fillipino I'm full Filipino Too!!!!!!!

[A1rsoftMH88]

@bernsan443 yea hehe , i am a halfy. Mistiso. Oh yea and just because you are filipino there will a documentary coming out soon hopefully on mainstream tv, maybe PBS, called the Hidden Dream which i took part in. so keep an eye out. its airing in San Francisco soon. Oh and yea this vest is perfect. it is so versatile in what you can add and what you can adjust. it can pretty much last you forever

[A1rsoftMH88]

@bernsan443 Yea this vest is all set different now, i have my serpa lower on the vest, and the pouches are tightend better and a few more pistol mag pouches are added now , and tan name tapes

[bernsan443]

Nah I havant ordered it yet.

I was going to buy all of it seperatly and it was like $150 so.......so they might give me a different plate carrier? I just hope they don't give me one that doesn't leave my sides open Thad the only thing I don't want

[A1rsoftMH88]

@bernsan443 no it will be like this one, here is the name its called the

ACM Ciras Vest, look up the name and you can find many people who own it

[bernsan443]

YESSSSSSSSSS!!!!!!!!!!!!!!!!

Thanks

Cause there's the matrix vest that isn't molle that I almost bought

[A1rsoftMH88]

@bernsan443 yea definitely this is the best choice, but if you ordered this from Evike you may not get this exact one. but it will be a full Molle Ciras. because they actually sold out of this one but still are selling the old one they use to have, ACM Ciras. Did you order this one?

[bernsan443]

None of the pouches are sewed on right? And it's all fully molle compatable

[A1rsoftMH88]

@bernsan443 No its all full Molle

[NativeKL21]

Kool loadout dude where did you get your gear from?

[A1rsoftMH88]

@NativeKL21 Blackhawk, evike, and airsoftmammoth

[MrAirsofter1]

nice load out mick

[A1rsoftMH88]

@pwner1997 yea i know, but dont worry just for the summer

[A1rsoftMH88]

@pwner1997 its under the video, it like the info on the video. it tells the whole story. You by name, the trade. check it out. you have to push more, because it only shows alittle

[A1rsoftMH88]

@pwner1997 look in the more info. shoutout