Cooler Master Cosmos 2 vs SilverStone Temjin TJ11 Enthusiest Case Madness! By Stanbony!

[richfortin]

Thank you so much for the comparison. You are great!

[Bidagon]

U just hate cosmos2 and u fan of that silverstone case -.- and pls dont fak and opet side panel of silverstone and look space inside and look in cosmos 2

[Bidagon]

Cosmos 2 is best ultra case, and power,restart button,2xusb 3.0 and control fans is on top u can slide cover on top -_-

And cosmos have more space than silverstone

[JigokuTrigger]

omg. i'll take either of them... Just no cash

[WorldExclusive305]

1K worth of cases. Well played.

[DigitalLem0n]

stan ur pc building king bro!

[theElemDragon]

Not sure if you noticed, but all 11 of those hard drive racks also support SSD's. Also don't know if i'd say the TJ11 has more interior room, since a fair bit is taken up by the fans below the motherboard, and the ventilation holes in the sides where those fans are fed air. Not to mention that while the 90-degree rotation of the motherboard IS nice, but it could cause issues if you have longer optical drives. You can also mount a 240 radiator in the bottom with the supplied mounts.

[3DX10]

Which one will run cooler plastic v steel. Nice video stan 3DX10

[stetson999]

love the hat.

[ComputerTechTV]

Awesome vid Stan 2 of the best cases IMO!

[keiki646]

FYI the motherboard center is 20mm closer to the top exhaust where you would place a triple radiator meaning that you will have to look for a slim model of a triple radiator to mount. Not able to have a push and pull configuration. I had the case for a day and realize that and send it back. But the case is perfect for a H100 switch is a slim radiator model but dual rad.

keep it mind that I would perfer an 360 X-Flow Radiator slim model for this case. one side in, other out to CPU

[Kirus1993x]

"Badest ass"???

[christpunchers]

I don't like the Cosmos's sliding front bay panel... it'll have problems down the line if you slide it around too much.

Also there's too much plastic on the Cosmos as well.

Either way I've got that Cosmos II coming my way.

[stanbony]

@christpunchers Im probly gonna remove the slide panel anyway, this build still has to conform to the original Crystal Skull design, hence, rad in the front, with skull grills, except i dont wanna say to much about the build just yet, but, it should have some silmilarities to the original, and i think and hope people see that.

Stanbony

[ThePunisher92Poland]

tj11 is much better if you want to have liquid cooling

[stanbony]

@ThePunisher92Poland I dont know about that, this case has some serious potential for water cooling, trust me, its huge inside.

Stanbony

[agallor6]

@stanbony bummer! I guess until I get a new desktop I can't... watch damn iPad.

[GraphicAbility]

I also like how you dont do a shit load of cutting and editing with the review section. You keep a natural un-cut dialog, just like how anyone else would speak in the real-word. Some people cut out the pauses or "uh...'s" but in actuality those are the parts where the viewers brain takes time to review what you just said and let it sink in for a second or two. Good review

[GraphicAbility]

I like your personality haha

[stanbony]

@GraphicAbility lol, thanks bro, i agree, ofcourse anyone makes mistakes but i think its easier to just say what comes off the top of your head, keeps it real.

Stanbony

[keiki646]

You will have to find a very slim radiator to mount between the MB and the top exhaust

[stanbony]

@keiki646 actualy, thats the last place you would ever put a rad in this, or any pc build in my opinion.

Stanbony

[keiki646]

@stanbony I don't think you are understanding, that the place where the triple radiator will be place the space is limited (not able to do push and pull) Yes on top of the case. I send my case back when i realize that, The TJ 11 is a better case for watercooling

[stanbony]

@keiki646 there is zero space at the top of the tj11, you can still fit 2 240's at the bottom, same as 1 480, and you can fit a 280 in the front, cant do that with the tj11, and i would never put a rad at the top of any case so the space at the top is irrelevent to me.

Stanbony

[keiki646]

@keiki646 See I wasn't talking about Tj11, only thing I said about the Tj11 was that it's watercooled friendly, I'm talking about the cosmos 2 case, You have to read the comments first buddy, I'd happen to say that I had the case for a day and send it back due to the fact that the cosmos 2 case is limited to thicker radiators and you're not able to do push and pull and only able to mount the fan on the opposite side of the top exhaust where a radiator would go but only a slim rad would fit

[keiki646]

Note that you never told anyone that you're not going to be able to do push and pull in the cosmos 2 case because of the limited space between the motherboard and the space where the rad will go(mounted)

[keiki646]

You should stand behind the cases and not in front of the cases when doing the review of the cases,

[spoonserver]

i love the way you keep rubbing marks off your cases, you really take good care of your stuff Stan. Great video thanks.

[agallor6]

No iPad playback Wth!

[stanbony]

@agallor6 because of the music, the vid has a syndication problem that doesnt allowme to make the vid mobile.

Stanbony

[DavidoPolandSecond]

whats the song name in the intro ? ;>

[JoiBASSi]

can you compare the HAF X to the two of these?

[stanbony]

@JoiBASSi no, because there is no comparison, these 2 cases are at a whole different level, no disrespect to the HAF-X

Stanbony

[SuPeRPiiG]

If you ever havve a nervous breakdown and give a p.c away....remember my youtube ^^

[onoff314]

Tj11 shits on the cosmos 2. you can't even fit a 60mm radiator and fans in a cosmos 2 despite its size

[Razer911z]

@onoff314 who need that fucking 60mm radiator

[onoff314]

@Razer911z Most people who watercool properly want a 60mm thick radiator (probably should have mentioned i mean thickness not length)

[stanbony]

@onoff314 There is no proper way to water cool, as far as worrying about rads and thickness, as long as you can dicipate the amount of wattage the hardware being cooled produces, doesnt matter if you have a 120 or 560 if its heat exchange rate is higher than the hardware being cooled. this case make no mistake about it, can house a ton of water cooling equiptment, trust meh.

Stanbony

[Geforce6150se]

3 little faggots was jealous

[Shrpshtr951]

@ 3m5s You say TJ11 has 11 5.25" bays, it only has 9. I just double checked on their website to make sure. Soon I will be getting a 8 bay custom reservoir for mine, should be awesome.

[Shrpshtr951]

@Shrpshtr951 @ 5m15s You said the TJ11 can fit a 480mm, it can fit a 560mm

[Shrpshtr951]

@Shrpshtr951 Last thing I noticed, you forgot to mention the TJ11 has a removable motherboard tray. I can't wait to finish my build and FINALLY OCN has received their order of gentle typhoon fans so I should have mine started fairly soon but do not know whether or not to wait for the new nvidia cards to come out.

Love the videos, keep em coming.

[stanbony]

@Shrpshtr951 ya, my bad, your right, hard to think that fast when your doing the review at live speed with no edit.

Stanbony

[Derbixrace]

nice video man, i love the silverstones 90 degree mobo mount, running a RV03 myself and love that case :)

[stanbony]

@Derbixrace SilverStone is pure Art! with out no doubt brah.

Stanbony

[BarackMcBush]

Nice Case , I like the Crystal skull 2 case.

[club4ghz]

sick cases are you going to swap parts from tj11 to cosmos ore you waiting for ivy bridge and gtx 780 for it? i just got HP ZR30w 30" 2560x1600 and i need gtx 780 badly

[stanbony]

@club4ghz ya, im probly gonna do the cosmetic shit and the things that dont do anything for speed or quality first, then go ivy bridge and kepler for sure

no, TJ11 stays the way it is with all its parts, this is a hole new build, ground up

Stanbony

[doomtomb3]

Stanbony, aluminum is a type of metal. I think by metal you mean "steel"

[stanbony]

@doomtomb3 ya, i always confuse that, you can figure out what i mean, it just comes out of my mouth a bit funny somtimes but there aint no reason to go back and correct shit you say just for a vid people know what you mean.

Stanbony

[CRAKIZGOOD]

when i bought the cosmos s i thought it was all metal :(

might buy a lian li A71F

[LaczupakabraPL]

It's great to see You back man!

TJ11 one of very best cases in my opinion.

[ffnlink]

I have nothing against the Cosmos 2, but it is just not for me. I really like the way the TJ11 looks, but like you said, it cost a lot of money. I am actually looking at the white Corsair 500R, cheaper these cases but still good, and I think it looks great.

[wherethebeef7]

<3 Silverstone all day. Have had the TJ-07 and FT-02, both awesome cases, can't wait until I upgrade to the TJ-07.

[SanandanDA]

Its simple the TJ11 can hold a quad rad thats all i care but the cm cosmo2 is not bad at all given the price point

[KickMoreAss]

You should look at Case Labs pc cases ^_^ they are bass ass

[Marlon0375]

ANODIZED ALUMINUM vs. PLASTIC...............SilverSt­one TJ11 !!!! 

[murder00redrum]

Yeah Stan, always your fan!

[stanbony]

@murder00redrum Thanx ma man, just keepin it real brah

stanbony

[urbanshaft]

what happened to the case labs?

[Ockap1812]

@urbanshaft I believe that was a mountain mods case he owned.