3 THE CEILING FAN WIND TURBINE CLASS PART 3

[cenedywong]

Your Video Is Very Useful Sharing . THE GOOD PART IS THERE ARE NO CALCULATIONS TO GO THROUGH, AND YOU GET TO REWIND AND PAUSE AS MUCH AS YOU WANT.

[muddymuddymuddmann]

@cenedywong THAT'S THE IDEA. FREE ENERGY AND NO HARD SCHOOLING. EASY BUILD AND INFO.

THANKS.

MUDDy

[TwoSpiritSurvival]

Anyway, I see you did use a diode bridge to make a DC current, and I know that the batteries themselves will regulate voltage going out, but wouldn’t you have to put in a voltage regulator in-between the turbine and the batteries so you don’t fry your system?

, Briana

[muddymuddymuddmann]

@TwoSpiritSurvival HEY BRIANA,

THE ANSWER TO THAT IS NO. YOU WANT THE VOLTAGE TO TRY TO RISE UP SO YOU CAN GET THE AMPS OUT OF IT INTO THE BATTERY. AS THE VOLTAGE TRIES TO RISE, THE EXCESS VOLTAGE TURNS TO AMPS. THESE LITTLE GENERATORS ARE 100 WATTS. 100 WATTS CANT DAMAGE THE BATTERY AT ALL. THE BIGGER WIND TURBINES DONT USE REGULATORS EITHER. JUST CHARGE CONTROLLERS TO DIVERT THE POWER TO A DUMP LOAD WHEN THE BATTERIES ARE FULL.

MUDDy

[TwoSpiritSurvival]

Hi. Cool turbine I like it. I tried to make one for my 6th grade science fair project, but my dad got mad that I was making a mess in the garage and threw it away. He was drunk and doesn’t remember. Oh well. I never did try to make one again. I am glad to see that it does work. I forgot about it until I saw your vids.

[muddymuddymuddmann]

@TwoSpiritSurvival IF I WERE YOU, I WOULD FIND A FRIEND AND GET THEM INTERESTED IN THE BUILD AT THEIR HOUSE. LET NOTHING STOP THE EDUCATIONAL PART OF THIS OR THE EXPERIMENTAL ACCOMPLISHMENTS THAT YOU DREAM OF DOING. FOLLOW IT THROUGH, AND YOU CAN SHOW YOUR DAD AFTER IT IS FINISHED. THAT'S A HEALING FACTOR TOO. ENJOY, AND ASK IF YOU NEED HELP.

MUDDy

MERRY CHRISTmas

[DiyEcoProjects]

Hi muddy, heard this from a friend. If you make a bus bar (two flattend copper tubes screwed into wood) and put that between wind genies cables and your charge controller, batter bank. What you can then do is also put a high power capacitor coming off from the bus bar as a separate wiring - this then apparently smooths out the signal. Thoughts welcome.

[muddymuddymuddmann]

@DiyEcoProjects YUP! ADDING A CAPACITOR HELPS SMOOTH THE DC RIPPLE OUT.

THIS HELPS KEEP THE GENERATOR NOISE OUT OF ITEMS USING FROM THE BATTERIES.

MUDDy

[crsbt]

im sticking to the simple stuff for now.

gr8 info.

[muddymuddymuddmann]

@crsbt THANKS, THIS IS PRETTY SIMPLE AS IT JUST NEEDS A RING OF MAGNETS INSTALLED, AND YOUR DONE. ALL OF THIS THEORY IS FOR THOSE WHO EXPECTED IT TO BE MORE LIKE A CLASS. I CALLED IT CLASS TO MAKE THE VIEWER MORE SPONTANIOUS TO COMMENTING AND ASKING QUESTIONS. LOL JUST LIKE CLASS.

MUDDy

[AZSunnyJim]

Very informative. Scott, which do you recommend using for a wind turbine; a ceiling fan a car generator or a car alternator, taking into consideration output and cost of fabrication? Thanks. Jim

[muddymuddymuddmann]

@AZSunnyJim THE CAR ALTERNATOR WILL COST A LOT IN MAGNETS AND NEEDS HIGHER RPMs. THE CEILING FAN HAS A WIDE VARIETY OF VOLTAGES THAT IT CAN OPERATE AT FOR CHARGING VARIOUS BATTERY BANKS, BUT IT IS 100 WATTS ON MOST OF THEM. THE OLD CAR GENERATORS ARE PRETTY GOOD AS IS AND NO ADDED COST TO OPPERATE. THEY JUST NEED TO BE GEARED UP A BIT FOR HIGHER RPMs.

IF YOU WANT GOOD POWER OUT WITH GREAT EFFICIENCY... TRY THE AXIAL FLUX ALTERNATOR BUILDS.

MUDDy

[Davidthehappyfellow]

You area a good teacher.

[muddymuddymuddmann]

@Davidthehappyfellow THANKS! I APPRECIATE THAT.

MUDDy

[JWnFL]

That was Fantastic!!! Thank You! I will watch all the others as well!

[muddymuddymuddmann]

@JWnFL Thanks! ... Warning... Do not operate heavy machinery after watching more than 3 or 4 videos in a row. Slight drowseyness could occur. lol. but the info is definitly all there. I hope you enjoy them.

MUDDy

[MichaelGeorgeBailey]

@muddymuddymuddmann NOT one person dislike'in this, means that its... CRAZY good, thanks for your info, my barn, trailer, and House (via grid tie inverter) and all benefiting from your generosity. Thanks

[muddymuddymuddmann]

@MichaelGeorgeBailey NOW THAT'S A CRAZY GOOD FEELING YOU GAVE ME. SOME THINGS YOU JUST CANT BUY.

THANKS.

MUDDy

[muddymuddymuddmann]

@MichaelGeorgeBailey JUST FIGURED I WOULD SEE HOW THE POWER SITUATION IS DOING. KEEP SMILING.

MUDDy

[hpsoap]

Hi there Mr muddy :). please excuse my lack of electrical knowledge but this is something i am trying to get to grips with.may i add something regarding the copper coils ? have you heard of a gentle man by the name of Marko rodin?(rodin coil).I would like to incorporate his coil within the wind turbine tech.But I am tooo much of a novice and have problems with the terminology every one uses :( your help would be greatly appreciated.Also please note i do not want to take this and make money.

[muddymuddymuddmann]

@hpsoap THE RODIN COILS SETUP IN AN AXIAL FLUX PMA WOULD BE BEST FOR THIS INCORPORATION OF RODIN COILS TO WIND TECH. GOOD IDEA. I AM STARTING ON ONE TONIGHT, WITH REGULAR AIR CORE COILS. THE RODIN COILS ARE AIR CORE AS WELL. THAT MAKES THEM THE IDEAL PLACE TO START IN THIS SCIENTIFIC ADVENTURE. SO MAYBE I WILL DO 2 PMAs. THE FIRSY INE WILL HAVE TO BE FINISHED FIRST.

MUDDy

[lastdaysguitar]

Nice video Scott!



[muddymuddymuddmann]

@lastdaysguitar THANKS KEITH! HOPEFULLY WHEN THE GREAT CATASTROPHY STARTS WE WILL ALL HAVE AT LEAST ONE OF THESE SMALL UNITS TO APPRECIATE. GOVERNMENT BROWN OUTS ARE BEING TALKED ABOUT AS WE SPEAK.

GOD BLESS YOU AND KEEP YOU SAFE ALWAYS.

MUDDy

KEEP UP THE MUSIC MINISTRY PLEASE

[9887663]

Hi Mudman,

Do you know when part 4 will be up and running?

Great class!

I'm able to keep up even with a broken arm.

I'm going to take apart my secvond motor tonight.

You know you should have more people looking into energy production.

Look the power companies are talking about Brown-Outs with all this Hot weather.

[muddymuddymuddmann]

@9887663 YA BROWN OUTS STINK. IT HAS RAINED HERE FOR A WEEK AND WE HAD A FEW DAYS WHERE IT SPRINKLED AND GOT CLEAR FOR A WHILE. I HAVE SOME FOOTAGE TO START WITH BUT I NEED A LITTLE MORE. THE FOURTH OF JULY TOOK MY ONLY GOOD DAY WITH IT. I BELIEVE A DAY OR 2 WILL WORK..

MUDDy

[mudmanrv]

From one Mud to another - Great Job. Watching this video - I just realized I have the polarity of every other magnet wrong ...lol. Currently they are +/-/+/- and they should be +/+/-/-/ on my setup. What I will likely do is transfer the one winding set over to that housing and keep my magnets the same. oh and by the way - thanks for the credit of the photo. top knotch!.

[muddymuddymuddmann]

@mudmanrv THANKS MUDDY ONE,

THERE'S ROOM TO STRETCH YOUR FEET OUT IN THE FRONT ROW, AS LONG AS YOU DONT TRIP THE PROF. AND THANK YOU FOR THE PHOTO. I THINK IT WAS MUCH BETTER TO DO IT THIS WAY THAN USE THE VIDEO I HAD. IT SEEMED A LOT CLEARER IN EXPLANATION. WE ALL THANK YOU.

MUDDy

[mudmanrv]

After some thought - the extra square magnets were bad. We want a conductor ring outside to bend the field back into the adjacent magnet as explained in your vid. The sq ones i had closed the air gap, but also connected to each other and closed the loop, effectively steering the field away from the stator back into the magnets. i will remove those and add a spacer to close air gap or leave as is.

[muddymuddymuddmann]

@mudmanrv WONDERFUL ANALYTICS. IF THE SPACER IS MADE OF A FERRIS METAL IT WILL DO WONDERS.

MUDDy

[helpmonkey]

awesome class ... good job muddymann ... a very easy to understand explanation of phase and megnetic flux... and Im sure sitting in the front row helped also :O)

[muddymuddymuddmann]

@helpmonkey THERE YOU ARE, FRONT ROW IS THE PLACE TO BE. HOPE I MADE YOU LAUGH A LITTLE. 2 PHASE IS THE NEXT BEST THING TO 3 PHASE. AND IT IS 90% AS GOOD AS 3 PHASE COMPARED TO SINGLE PHASE BECAUSE IT IS ALWAYS CHARGING.

5 PHASE IS ONLY ABOUT 3% BETTER THAN 3.

LOTS OF FUN. THE HARD PART OF THE CLASS IS NOW OVER. NOW WE CAN DO THE HANDS ON AND UNDERSTAND ALL OF IT. I WISHED I DID THIS ON THE OTHER SERIES.

THANKS FOR THE SUPPORT.

MUDDy

[harpbloke]

scott, this is the best video. straight forward explanation, great graphics.

this has been a huge help to me, something i could never really get my head around. i have two fan motors from a large aircon, and now i can understand a bit more what i am supposed to do with them. ive been wanting to add them to my vawt.

thanks for an excellent vid.

[muddymuddymuddmann]

@harpbloke THANK YOU FOR THE KIND WORDS! I PLAN ON MAKING VOLTAGE , RESISTANCE, CURRENT AND POWER MAKE SENSE TO THE COMMON THINKING. THIS WILL SIMPLIFY ANY MISUNDERSTANDING THAT PEOPLE HAVE ABOUT HOW ELECTRICITY WORKS.

IT SHOULD BREAK DOWN WALLS THAT SAY TO THEN "IT'S TO HARD. IF GENIUS IS SIMPLICITY, THEN SIMPLIFYING THE WAY ONE THINKS ABOUT IT IS THE KEY TO UNDERSTANDING THE HARDEST MENTAL WALL SUBJECTS.

CHEERS!

MUDDy

[doug2877]

nicely put, you should have a PHD in 3 phase coils,,LATER 

[muddymuddymuddmann]

@doug2877 A PHD IN 3 PHASE COILS! COOL!! BUT I FIGURE THAT WRAPPING THE WIRE AROUND THE POST HOLE DIGGERS IS EASIER.

MUDDy

[anyonefindAMERICA]

See now I knew that it was greek because you said Omega. I also understood the Scott Brown part. I guess I'll sleep with me laptop under my pillow so as to absorb all this technical mumbo jumbo. Ha ha I'll get it. May take awhile, I got some time. Thanks for your work Mudd.

[muddymuddymuddmann]

@anyonefindAMERICA DONT FEEL BAD. ONE OF THE CLASS MATES SENT ME A THANK YOU IN FRENCH. SO I SENT IT TO A FRENCH FRIEND OF MINE. HE TRANSLATED IT FOR ME. AND THEN HE TOLD ME IT WAS ITALIAN.

I TRIED GREEK AND HEBREW ONCE, BUT THEN THAT FINE TENNESSEAN

GAL MOVED NEXT DOOR. 'NUFF SAID!!!

MUDDy

[jeanlucvar]

Hello my friend Muddy

Truly a unique learning opportunity, a big thank you and all my best congratulations, good continuation in your research, always appreciated.

See you soon, for the remainder of your adventure. Again , Many thanks and Bonjour de France

[muddymuddymuddmann]

@jeanlucvar HEY JEAN LUC,

GREAT TO HAVE YOU IN THE CLASSROOM!

HEY CLASS! JEAN LUC HAS THE MOST ELEGANT LOOKING CEILING FAN WIND TURBINE EVER BUILT BEFORE THE CLASS. A MUST SEE!

TRULY WORK OF ART.

MUDDy

[mrhulot101]

thanks

[muddymuddymuddmann]

@mrhulot101 YOU ARE WELCOME. THANK YOU FOR THE COMMENT! YOU GET AN "A" AND A SILVER STAR ON YOUR NOTE BOOK.

MUDDy

[sjh7132]

Good lesson.  Is this going to be on the final exam? :-)

[muddymuddymuddmann]

@sjh7132 NO IT WILL BE EASY STUFF LIKE: IF THE MOTOR IS TURNING 100 RPMs, WHAT IS THE FREQUENCY OF THE DC RIPPLE AFTER THE BRIDGE RECIFIERS' OUTPUTS ARE JOINED.

MUDDy

[Theskidmark61]

Thanks! Very educational

[muddymuddymuddmann]

@Theskidmark61 I APPRECIATE THE MORAL BOOSTER!

YOU GET TO CLAP THE ERASERS

MUDDy

[Aceman307]

Very nice.

[muddymuddymuddmann]

@Aceman307 THANKS !

I TRIED REAL HARD ON THIS ONE.

MUDDy

[juanviperea]

good maths

haha

[muddymuddymuddmann]

@juanviperea HEY! BROWN NOSING WILL GET YOU AN "A" HERE. THANKS!

MUDDy

[pakscienceclub]

congratulation Scotty ...very nice Presentation.....

[muddymuddymuddmann]

@pakscienceclub THANK YOU FOR THE COMMENTS,

THIS LESSON PLANNING TAKES A LOT OF TIME. I'M GLAD I CAN GO BACK TO THE HANDS ON PART OF THE LESSON NOW.

MUDDy

[pakscienceclub]

nice nice nice......

[muddymuddymuddmann]

@pakscienceclub HEY, ABDUL AND THE PSC GANG.!!

GREAT TO SEE YOU IN THE CLASS. I MIGHT HAVE TO GET MORE DESKS AND CHAIRS FOR YOU GUYS. THANKS

MUDDy

[JOHNNYH8STHENWO]

Youtube won't let me rate this.

This seems kind of complicated.

[muddymuddymuddmann]

@JOHNNYH8STHENWO

YA IT'S BECAUSE LARRY, CURLEY, AND MOE BAMA ARE ON DUTY ON THE TECH SUPPORT TEAM THIS SHIFT. YOU'LL BE ABLE TO RATE IT AT NIGHT.

MUDDy ;~)