I always put front and rear lights on my motorized bikes and run them off the white wire from the engine. If the engine's on the lights are on. They are nice and bright and make sure I am seen and can be seen.
Those bicycles look cheap with 1 piece crank and caliper front brake. Front drum brake necessary with heavy steel cruiser bicycle. I hope your business is sucessful and you make lots of money. There are other companies that sell motorised bicycles without a front brake that are unsafe at any speed. Does that engine damage the rear wheel or break spokes?
I could post a video on it but as of now my camera is down. The Highth of the intake and exhaust ports would need to be known so Id need the Family of the Engine. Usually they arelate So lowering the intake 1/16" and lifting the exhaust port a little less will do. shaving the head you chuck uphead on any lathe use the spark plug holes threads and a big bolt with the same threadsshaving tool at least 2.5" wide I go all the way to the head taking the protruding circle domes square off on most.
I always put front and rear lights on my motorized bikes and run them off the white wire from the engine. If the engine's on the lights are on. They are nice and bright and make sure I am seen and can be seen.
Scootertuner1000 5 months ago
@rouletteamp what type of front v-brakes would you recommend, and are they easy to install on a cruiser bike?
superballer365 5 months ago
your voice is like a weak hand shake, speek up and rep your company like you care
thisgame2 11 months ago
I want to buy two 80cc versions of this bike from you. You do such a nice job on them. Please email me at arclight4507 at yahoo dot com.
arclight4507 11 months ago
Nice bike's I have some too . I don't sell them till I get tired of them or to fund a new project check out my video
pohsibgep 1 year ago
does this price include the bike too? I have a friend who is starting this but he installs the motor on your bike for $400.00
dandoran59 1 year ago
looks like the chain chewed the back wheel on the last bike.
Carmador 1 year ago
Those bicycles look cheap with 1 piece crank and caliper front brake. Front drum brake necessary with heavy steel cruiser bicycle. I hope your business is sucessful and you make lots of money. There are other companies that sell motorised bicycles without a front brake that are unsafe at any speed. Does that engine damage the rear wheel or break spokes?
bluemountaindrivepae 1 year ago
can you do a video on how you shave the heads for more compression, Port timing and balancing???
ils360 2 years ago
I could post a video on it but as of now my camera is down. The Highth of the intake and exhaust ports would need to be known so Id need the Family of the Engine. Usually they arelate So lowering the intake 1/16" and lifting the exhaust port a little less will do. shaving the head you chuck uphead on any lathe use the spark plug holes threads and a big bolt with the same threadsshaving tool at least 2.5" wide I go all the way to the head taking the protruding circle domes square off on most.
rouletteamp 2 years ago
whare do you get the extrem fins??
ils360 2 years ago