iAtkosv7 on AMD PC

[CongDanhVip]

Realtek HD ALC662 is 5.1, not 7.1!

[kennydude19]

heya man i need more assistance how can i get the resolution right i cant see all of osx tools as the res is wrong, i can only get 800 X 600 :( how do i fix this

[clarkkov]

@kennydude19 Just do this: youtu.be/2jLlClH8jJ4?t=5m50s

But you have to use the GT8800 for this to work

[KeyOfNotebookGaming]

@clarkkov Hello! I have: Amd Athon II X2 P340 processor (2x 2.2 Ghz)

3GB DDR3 Memory, and Ati Mobility Radeon Hd 4250.

This version of iAktosV7 works for me?

[jamesperez728]

@kennydude19 I used the ati kext frrom iatkos7 and it works great for my 9500gt. i believe that kext is generic for most video cards. I can get any resolution that my monitor can handle. good luck.

[kennydude19]

Well after much trial and error i managed to get snow leopard (iaktos v7) working on this setup

AMD Athlon II X2 overclocked @ 3.4 ghz per core

4GB DDR3 RAM (overclocked to 1600mhz)

The motherboard is a Foxconn Cinema II Premium

nVidia Geforce 8800 (Point of View) 1GB GDDR3 graphics card (PCI-E bus overclocked)

1TB Hitatchi SATA II HDD

Hitatchi DVD RW Drive

Networking, Usb, Graphics all working. Just need to get sound kext working

[clarkkov]

@kennydude19 Try searching for "AppleHDAPatcher_v1.20.zip"

[kennydude19]

@clarkkov awesome stuff! thankyou so much also can i ask, something wierd happens with the graphics like when im using an application and i move the window the graphics go all wierd but graphics work just fine with the onboard ati chipset i have on the mobo. How can i fix the issue with the nvidia geforce 8800 as i didnt know what to select in the install (custom options) for nvidia cards, i chose to use the intel kext which works with the onboard ati, how do i get this nvidia card working right

[clarkkov]

@kennydude19 8800 is fully supported, you can use OSx86Tools to enable the drivers for this card (I demo how to do this in the third part of my Hackintosh Tut on my channel).

[bbslam1]

this song suck you blowtard

[Syko946]

Ah joj :( Ocu i ja da uzivam Mac os x :( Sve sam uradio.

Ja imam i laptop, i tam je doslo "Kernel Panic" :(

Znaci da nije do grafike

[clarkkov]

@Syko946 A koju grafiku imaš na laptopu? Probaj sa drugim kernelom.

[Syko946]

@clarkkov To neznam al je kompartibaln

[Syko946]

Hrvat :P ^^

[clarkkov]

@Syko946 Živim u Srbiji, pozdrav za Hrvatsku!

[FischundCoProduction]

what did change in bios for installation you have nearly the same system :P

[clarkkov]

@FischundCoProduction HDD is plugged into the first SATA port, used SMBIOS 28 and Voodoo 9.7 kernel. SATA controller set to "Native IDE". What seems to be the problem?

[FischundCoProduction]

@clarkkov which downloadlink did you use ?

[clarkkov]

@FischundCoProduction I downloaded it 2 years ago...that link is no longer active. Try Leohazard, it's Snow Leopard 10.6.2, download it fromLeohazards site, just google "leohazard".

[hiphoprap365]

can u say wat were the setting on the page before instalin goin in the optios tab?

[clarkkov]

@hiphoprap365 Could you please clarify?

[JamesFisher100]

I have watched a few videos regarding Hackintosh's. And i just want to ask a quick question before i go ahead and follow your tutorials.

Can you tell me if this hardware would work with your tutorial. And can you advise me on what version of mac to get for iPhone SDK

Crosshair II Formula

AMD Phenom II X4 960 @3.4GHz

8GB Corsair Dominator @ 1066MHz (4x2GB)

XFX HD 5750 Eyefinity edition

OCZ Vertex 2E 120GB (Windows 7)

500GB Seagate Barracuda (Storage)

250GB Excel Stor (Hackintosh Drive)

Thanks!

[TheSkillzDoriftar]

dont work on 80 gb 5200 rp/m nvidia 9500 GT 512mb,2gb ram 800 MHz,AMD 64 5000+ 2.61 GHz why?

[clarkkov]

@TheSkillzDoriftar This hardware should work with no issues, what mobo are you using? Can you boot the DVD?

[TheSkillzDoriftar]

@clarkkov i install but at apple logo say restart and i restart and restart and restart but same problem...

[deanhome1]

did you use v4 aof iatkos i have a amd turion II 64 bit think it will work

it says it supports sse1,2,3 ati graphic card 4 gig ram



[clarkkov]

@deanhome1 No, I went directly to v7, before that I was using Kally, iDeneb and iPC. It's best to go with the latest version, like v7 or iDeneb 1.6, or even Leohazard (snow leopard). iAtkosv4 is Intel only so it won't work with Turion (AMD). ATI graphics can be tricky, so ask around if your model is supported e.g. HD4200 have only software support, HD5000-6000 are not supported yet etc.

[Alirezammh]

The background music is sort of unnecessary !

[clarkkov]

@Alirezammh It's there to demonstrate that sound works, and to break the monotony of just a boring screencast.

[InitializeRonJames]

can i run mac os?

here are my specs:

amd phenom x4

msi 785gtm-e45

2gb team elite ddr2-800

onboard hd4200

sata hdd

sata dvdrw

[clarkkov]

@InitializeRonJames You can run it, but your hd4200 won't be fully supported. I recommend getting a cheapo dedicated card (like gf9400GT)

[TheParallex]

@clarkkov hey mate what version of hackintosh would work with the following Motherboard Gigabyte GA-870A-UD3 CPU AMD Phenom X6 1055T 6CPUs 2.6Ghz RAM 4gb of ddr3 ram graphics Nvidia GTX 460

[clarkkov]

@TheParallex iAtkos S3 or Leohazard would be the best choice for your hardware. But there is a catch, your GTX is not exactly supported for now, there is a complicated procedure to make it work and it can work fully, but you have to dive in to the kexts code and what not. Do a search on insanely mac for more info about your GTX.

[InitializeRonJames]

@clarkkov

bro, i installed mac 10.6.4 snow leopard on my rig that has hd4200, the only problem that i encountered is that there is no sound.. but i solved it by trying different drivers! :)

[clarkkov]

@InitializeRonJames Good for you! But you'll soon realize that you dont have QE/CI support with that card. I guess it's fine for browsing the net and office work and souch, but as soon as you try video editing or graphics rendering, you'll see it won't work. If it does and you do have QE/CI with HD4200, please PM me with the drivers/kexts you used or a method you managed to get it to support QE/CI. You can check for QE/CI support in "about this Mac" under graphics adapter category.

[TheBlacklistno1]

Worth trying this on my system?

CPU Type: DualCore AMD Phenom II X2 550, 3100 MHz (15.5 x 200)

Motherboard: Gigabyte GA-M52LT-D3

RAM: 6gb DDR3

Video: ATI Radeon HD 4670 (RV730)

Thanks for a reply. ;)

[clarkkov]

@TheBlacklistno1 Your specs look to be compatible (nForce 500 cipset), but I'm not sure about the g card. Some guys are able to make it work just by selecting HD enabler from the DVD,but others report no QE/CI support (I guess it depends on the device ID).

[dgo401]

hi i really like this video you made

but i was wondering if it would work on my system my specs are:

CPU: AMD Athlon 64x2 dual core 6000+

Motherboard: Asus M2N-SLI ( not deluxe version)

GPU: nvidia geforce 9800gt

HDD Sata 2 western digital 500gb

Liteon blu-ray dvd player (sata)

Nvidia nforce networking adapter

do you think this will work on my system?? or what do you recomend me to do?

Sound: C-Media CM6501 Like Sound Device

[clarkkov]

@dgo401 Your hardware is compatible with iAtkos or iPC. I'm not sure about the blueray drive, it may be recognized as a regular DVD drive or not recognized at all (if it's not recognized, add a DVD drive). Use nForce kexts when installing and Voodoo 9.7 kernel.

[s0rdfish]

AMD Phenom II X6 1055T Gigabyte GA-880GM-UD2H Seagate/WD 500GB/1TB Hard disk 2*2GB DDR3 1333Mhz Kingston RAM corsair cx400w Cooler Master Elite 430 cabinet or NZXT Gamma msi gts450 cyclone LG DVD Writer BenQ G2220HD Logitech keyboard + mouse combo Will this work on this config ??

[clarkkov]

@s0rdfish Your configuration looks compatible, I know for sure that 880G chipset will work, but there may be issues with integrated peripherals on your board (wi-fi, sound etc.), but only because I don't know what chips they're using. GTS should be supported OTB or by enabling the nvinject. Use Leohazard, it's newer than iAtkosv7 and good for AMD CPUs, supports newer hardware.

[jamesperez728]

I really appreciate your hard work here. It helped make an amd hackintosh. It took a week or two to figure it out. But, it works with with iATKOS V7. 9850 quad core cpu, 9500gt evga, ga-ma785gm-us2h, wd750 hd, lg dvd burner ide ,hec750 power supply, 4gigs of ram, and an antec p190 case. My hackintosh is way faster than my quad core g5. Thanks.

[clarkkov]

@jamesperez728 glad you made it, and glad you posted feedback. take care

[MrNuun]

Hm.. I dont think it'll recognize my HD5770 :(

[clarkkov]

@MrNuun Yeah, HD5770 is too hi tech for OS X. You can run it with VESA driver, but you'll be without QE/CI. 5x driver should come soon for iAtkos S3

[TheCompyshop]

@MrNuun ya lol, crap macs cant handle the good shit.

[zaivatsu]

creia que pondrian un video tutorial de como instalar mac en AMD pero no buuu!!!

[clarkkov]

@zaivatsu Yo no hablo español :(

If you're looking for a tutorial, check out my channel, but if you want to make one, why not, mine is outdated a bit, Hackintosh community would use another fresh tut.

[midniter666]

I have toshiba A215-s4747 with AMD........ I already have XP installed on it...... do I have to format the Hard drive clean to install >>>>> iATKOS v7 Mac OS x86 Leopard 10.5.7 for PC (Intel/AMD: SSE2, SSE3)...... can i leave the XP on the HDD and dual install MAC OX

[clarkkov]

@midniter666

You can dualboot, but it's a little more complicated to set this up. You have to have 2 separate partitions and both of them have to be primary. If you have that already, just install OS X into 2nd partition, note that bootloader will mess up your Windows boot mgr so you'll have to repair it from your XP install DVD (google this info, there is a lot of tuts for everything you need) . If you don't have multiple partitions, you'll have to format your drive

[midniter666]

@clarkkov , hey bro . is there a tutorial/guide for this..... Some say my CPU is not SSE2.... so it wont work..

[clarkkov]

@midniter666 Tutorial on what? You can check my channel for OS X distro installation tutorial. You can check if your CPU is SSE2/3 with CPUZ app, just google "CPUZ".

[nebelllll]

Hello.I have exactly same configuration of computer. Could you please tell me which exactly kexts and fixes you selected in customization menu before install?

[clarkkov]

@nebelllll

Main system :D, Xiezhy bootloader, USB, Apple PS/2, extra directory, DSDT, Apple Decrypt, Apple-SMBIOS-28, 9.7.0 voodoo, x86 ACPI, Disabler, OHR, ATI&VIA SATA/IDE, no sound (installed hlc662 kext), ATI HD Enabler for HD 3850, for 9400GT generate strings in OSx86Tools - no video, realtek RTL 1000, post install actions.

[nebelllll]

@clarkkov Oh. great. Thank you very much for such fast reply. I've tried iDeneb and always get problem with my USB, which stops responding when I connect 2 flash-drives, or turn on printer and scanner or something else changes among connected usb-devices. So I hope that this release will halp me, as different fixes and kexts didn't do.

[mendozairis]

Will iAtkos make a Snow Lopard distro? If so, When will they release it?

[clarkkov]

@mendozairis

It was planned under the work name iKaros (intel only) but I didn't hear about it in a while...Although, there is another Intel/AMD SLeopard distro and is working quite well, it's called Leohazard or Snow Leopard by Hazard. Go|to: leohazard dot c|o|m for more info.

[mendozairis]

@clarkkov I have Leohazard too. But I never finish installing it. It always says "Install Failed. Failed to verify the contents of the Java Package" when it's about 90%. Maybe you know this problem?

[clarkkov]

@mendozairis you should check out Hazards forum if you didn't already. I am not familiar with this kind of error, Vaios are tricky, it looks like you need to fiddle with the installation customization.

[toonho2500]

Hi..Will it work on: AMD Athlon X2 64 1900

3GB of Ram

Ati radeon 3200 HD

Realtek RTL8187B Wireless

My Laptop is an Toshiba Satellia A300-14D.

Please help me :s

[clarkkov]

@toonho2500 It should work, all your hardware looks compatible. Take a look at my tutorial video - it's also on my channel

[rat1a1tat1tat]

youll just have to try it,

id download vmware workstation and install it on there so it makes no changes to your laptop.

your laptop loks fast enough to run it but its all about compatability

im runner an smd machine and having a few problems with it atm:\ you might need to fiddle about with the customise options abit

[clarkkov]

Both suites work perfectly, you have my word :D

[MyNameIzWHAT]

Will This work with:

AMD Athlon M300

ATI Graphics Card

2GB of RAM

And a Partitioned Drive for iAtkos v7 or any other Distro.

[clarkkov]

it should, but i'm not sure about the mobile CPU, they can have specific architectures, also, what ATI card are you talking about? Everithing above 2900XT works, sometimes x300 work, x1200 and legacy radeons like 9200, 9600 don't - there are no drivers for them in OSX 10.5

[123456789sha]

hey i got:

AMD Athlon x2 7750

2gigs of ram

HD 2400pro 512mb

and a partition for iAtkos v7 BUT if i install it everything goes OK but when it need to reboot @ the end of the install it gets a kernel panic :(

[clarkkov]

@123456789sha But does it work afterwards? Can you boot after you force-restart? It sometimes happens, but OSX installation is successful, it can happen because of the DVD drive, OSX can't open the tray after completing the installation - which it does by default, but this can also be a patch, SMBIOS or kernel issue. When does exactly happen? After 15-20 minutes? You can try without some patches and change the kernel and see if it'll panic then.

[123456789sha]

no man, wait im gonna sub you and put the film i recorded from the instal so you can see what it does

[clarkkov]

@123456789sha you don't have to sub me to do that. Send me the link when you up your vid so I can take a look at it. Also, if you haven't seen my tutorial about OSX you can take look at it and see if you are doing something wrong.

[HKFLX4656]

If not can it work on

AMd Sempron 1250 LE 2.2GHZ

2GB Of Ram

and Nvidia 6150SE

what are the requirements for it

[clarkkov]

@HKFLX4656 The Athlon 64 x2 is better way to go, mainly because it has sse3 and Nvidia 6150SE is not supported so you will get only safe graphics mode on that card.

[HKFLX4656]

@clarkkov I saw your video on how to install iATKOS v7

now i have one question

what happens after the installation if done?

[HKFLX4656]

how did you install

btw will it work

on

AMD Athlon 64 X2 5600+

2GB of Ram

Nvidia GTS 250

[MakeupMr]

Hi i have an amd sempron and i just installed iatkos an everything works fine the usbs, ram, sd card slot, cd

But my sound and ethernet and it isnt able to play dvds cuz i put one in and it says an error occured

But i would want ethernet and sound to work any ideas????

[clarkkov]

You have to install/select correct drivers for your audio and Ethernet devices. Find out what chips your motherboard has and then install drivers for them from the iAtkos DVD.

[MakeupMr]

oh thnxz yea i installed it on my PC and it works YAY XD

only thing missing is the sound and im trying to install kext in the extension file so that i can plug in external speakers using the earphones plug :)

[MyNameIzWHAT]

Please make a tutorial so i can understand better

[clarkkov]

I have made a basics tutorial on how to install OSx86 (iAtkos), just check my channel.

[gorpet73]

Da li moze neko uputstvo ili link ka dobrom tutorijalu na srpskom, po mogucnosti dual boot OS X-a sa Win 7. Hvala!

[MrVanofthedawn]

can someone give me a full guide to install iatkos on amd pc....

im actually new in mac os x

[clarkkov]

You can take a look at my basics tutorial, it's on my channel and you can google "install OSX on AMD PC" there are many thorough written tutorials on this topic, but be prepared to invest time and effort into this project.

[MrVanofthedawn]

i already tried but still not working...it stuck at when i finished install mac n need to reboot. can some 1 help?

[clarkkov]

Could you please explain more closer? How are you "stuck"? Have you customized and installed OSX? Also, what are your computer specs?

[MrVanofthedawn]

my pc specs...

Amd phenom quad core

motherboard asus m2n68-am

graphic card msi n9600gt 512mb ddr3

ram ddr2 800 4gb

here the prob i face.

it happen after i customize the driver n install mac.after the installation my pc should be automatically reboot but it not.i don't know what wrong.could it be because i choose the wrong driver?

[clarkkov]

Try these settings:

Install with Chameleon 2 bootloader

MCP67/nforce driver under SATA/IDE

nVidia driver for ethernet

VoodooHD audio driver

Choose the correct video driver/or no driver

Leave the rest at default settings

Even if it won't reboot manually (and panics), reboot the computer. Add ACPIx86 patch, too and Install with Voodoo 9.7 kernel and try more SMBIOS enablers (one by one).

[MrVanofthedawn]

perfect...now i can use mac on my pc,along with win7. it works perfect.thanks bro

[rickylascaze001]

can u put mac on a flash drive n boot it like that

[cloudbook1994]

what driver did you use for the alc 662

[clarkkov]

you can download ALC drivers @ insanelymac(dot)com. Just search the site, or try searching for ALC codecs for Kallyway. The provided drivers by iAtkos won't work properly for ALCxxx (which I am assuming you know).

[ILMBerlin]

hey we have the same components :) so i fink it will works on my computer:)

a bite is different, i use a xfx GeForce 8800 GTX 768 mb, it will works with this card ?

[clarkkov]

98.9% :D It should work with no issues, but it all depends how will you set it up. Watch my "hackintosh basics tutorial" in my channel to see how to set up your graphics card...Good Luck!

[redsoxhater2468]

This may be a dumb question, but in terminal, it's still going to be UNIX coding right? Opposed to it just being DOS

[clarkkov]

What do you mean? OS X is a UNIX based OS, terminal commands are almost the same in OSX as they are in Ubuntu.

[redsoxhater2468]

Oh sorry, after reading up on this more, now I realize it's just another OS. I thought since it was an emulator of another OS, it would still be Windows coding.

I'm thinking of getting this to run on a cheap little acer. Will it work on a Raedon X1200 graphics card?

I have no idea if it's powerful enough.

(god i hope so lol)

[clarkkov]

It's running natively, it's Apple code, no emulation, all hardware is running natively. But there are no drivers for your x1200, It could work, but only in graphics "safe mode" 1042x768 or 1280x1024.

[PnTnetworks]

of course

[DarkS3phiroth17]

well in fact is full unix standard...any unix command will work, just the firewall, is different cuz they took that from bsd(ipfw)

try to use screenflow next time, i have no slowdown in videorecording with that

[clarkkov]

I have used Screenflow in my newest video, Snapz sucks! But I did not know about Screenflow when I made this video.

[DarkS3phiroth17]

i c, aniway nice job, maybe you can try with some game, dunno a cider port of half life, or CoD4, need for speed carbon, etc and make some video about the performance in games too, if you want, soon also diablo3 should come out.

but as i can see, should be pretty fast, in any task

[clarkkov]

Well, this is not a performance video, this is just a demo that OSX works on a "regular" PC. Maybe I will do the performance and capability/compatibility vide later, like with CS4 and iLife and maybe a couple of games, but it work no problem, the CS4 and iLife, FCP, iWork etc.

[hanzpogz]

how did you install it? coz im having a hard time installing iatkos. ive got kernel panic like

Backtrace terminated-invalid frame pointer 0

BSD process name corresponding to current thread: kernel_task

[clarkkov]

Try asking on insanelymac(dot)com. It looks like a bigger issue. You can always try different kernels and see if one of them wont panic.

[manolete72]

works so much better than amd

[clarkkov]

What works? This is on AMD, it's a 13 fps compressed video, it works really good when seing it live.

[manolete72]

i know it works really good, i just reply the comment down, i test this on a intel core 2 duo and works so much better ts all !!

[clarkkov]

Ah..well I tested this iAtkos both on Intel and AMD and AMD seems to boot faster (1sec) but they work the same, of course I'm talking about equivalent processors, the Core i7 will certainly work wonders.

[thehostler]

i got iatkos v7 on my intel pc. runs great!

[Kentech0023]

Would this work with a Core i7?

[clarkkov]

Yes it would, but it wouldn't recognize all of your cores, it can see only up to 4 cores. At least that is what I heard, I know it works with i7

[stewartjsly]

does it come with garage band

[clarkkov]

No Garage band is a part of iLife09, you can download iLife and iWork from TPB, and install them like any other app for OSX.

[digitalsoundtouch]

hey man, i have X2 6000+ and im also using iatkos v7, but my cpu temps are higher then in windows and cpu fan runs at higher RPM, do you experience the same problem?? Maybe you know how to fix this??

[XboxNerd08]

the computer is like fuck fuck fuck cant keep up with the awsomeness

[clarkkov]

No I don't, what kernel did you use, what clock does the "about this Mac show?"

[v1d300]

so how do i proceed with the dual boot?

I already have win7 x64 installed.

So do i have to fix the boot with win7 or with osX ?

[clarkkov]

I have the same combination, I have decided to fix 7's boot loader and then installed EasyBCD in 7 and added an entry for OSX. You can install Chameleon 2 with the iAtkosv7, but I had no luck with it, I can't add W7 entry to it.

[v1d300]

So you had Win7 already installed and you installed OSX on different partition?

If so, which boot loader you tried and which would work?

Also check your PM. :)

[tasteslikewater]

I have the same specs as you. What opptions did you check when you installed?

[clarkkov]

Check Voodoo kernel (the latest), Jmicron IDE controller, Realtek ethernet adapter 8xxx, NO VIDEO DRIVER (install the EFI string via OSx86 Tools after installation), ALC audio, select the drivers that say they support ATI chipsets, there are a couple. This way everything works out of the box, except for the audio, you have to download HLC662 codec Kalyway and install, restart and there you go...

[fuckyky]

can i install paralell windows on tis???

[clarkkov]

If you mean a dualboot setup (OSX and Win in the same bootloader), yes you can, but if you mean on Apples bootcamp, I don't know if it works.

[brianskatesbath]

OMFG is it easy? just install on VMware via the iso you downloaded with iatkos v7? or do you have to do a bunch of bull with CMD and patching from tiger and everything? please reply as soon as you can...i too have an AMD Athlon 64 6000+

AND CANNOT GET LEOPARD WORKING

thanks :)

[clarkkov]

Well, it's easy if you know what are you doing ;). This is installed as an primary OS, no VMWare or emulators. You just need to download a patched .iso image from "you know where" and burn it, then boot your comp just like when installing Windows, pick a HDD to install to (has to be FAT32 filesystem). For more info go to> insanelymac (dot) com

[brianskatesbath]

i got a 10.5.5 working on vmware I'm okay now :)

[chuckmusic09]

DID YOU TRY BOOT 132 CD