This is pretty funny. I can hold the throttle half down and then all the way and say that that was a nitrous boost too. You're so fuckin stupid for trying to act cool by sayin you got nitros on an rc truck. The tires on my Revo 3.3 balloon too when its going full speed on the ground, not on a gay ass stand
@1994JUSTIND Yes my revo tires balloon at full speed as well, however I can assure you that was not half throttle going to full. Apparently you did not actually watch the video. I am actually going to be fitting my Revo with nitrous in the next couple days and will be updating my videos. Thanks for the comment and watching my videos.
@itsgr82bl8 Alright dude your mad dumb if your gonna put nitrous on a Revo. My Revo 3.3 will smoke any shit you bring to it. My Revo's stock and goes 55mph. i tuned the shit out of it. You definitely didn't have the throttle all the way down. All you did was give it a little more gas and said you have nitro. I could see the throttle linkage move when you hit the gas more. If you had real nitrous, the throttle linkage wouldn't move when you hit the nitro. The engine would just rev more
@1994JUSTIND You should do some research before you let your ignorance shine through like you are. The linkage you see moving is the actuator screw opening the valve for the nitrous oxide. Look a little closer you will see it. Guess what my 2.5R Revo smokes 3.3 revos on a regular basis (even my 3.3 Revo) I have been running nitro RC's for over 20 years I can assure you I know exactly what I am doing. If your in the Pacific Northwest I would be more than happy to give you a demonstration.
@rigthguard420 Yes that is a T Maxx, the nitrous kits are no longer available. I am aware of the superchargers they work however at the cost of blowing tons of raw fuel out of the exhaust and very difficult tuning.
@brocklebouef Umm, it shifted into 2nd gear then I hit the nitrous oxide, go back watch the video again. Nothing fake at all this is nitrous oxide injection. Take a look at my other nitrous oxide videos as well.
@WhatAreWeDoingForFun The nitrous kit is hooked up to the third channel, reverse is locked out on this maxx. I intentionally put my hand in the view so you could see when I activated the nitrous. Nothing fake there.
NO KIDDING WOW!!! Your "stock" savage also has a big block on it, this maxx has a Pro .15 your savage has a lot more power than this older maxx, and guess what this old stock maxx with nitrous stomped a Savage with an XTM 247 Pro.
and it still has a larger more powerful engine than the old Maxx did, the point of the ballooning tires is the stock Pro .15 won't balloon them that much after the truck is already at WOT without nitrous. That engine was spinning the tires as fast as it could, hit nitrous and all of a sudden the RPMs go up enough and fast enough to get the tires to balloon.
Sorry I didn't mean to delete your last comment, clicked remove instead of reply. Anyway you have a built in primer, while cranking the engine over (either via pull start or roto start) place your finger over the exhaust pipe (without your glow starter attached) this will prime your engine. It only take 3 or 4 cranks to get her primed. Works like a charm!
lol, I really don't know you do have to be careful to not flood it using this technique, it's a little hard to flood a big block though so your in luck. Works really well and you don't have to taste nitro methane every time you wanna run your truck. I've been in the hobby now for 16 years, I guess you just pick up on things :)
Yeah I have seen the e savage, it's cool electric is a blast too! I ran a motorcycle with a 6800kv castle creations brushless setup with an 11.2 LiPoly battery pack. We radar confirmed that little bike a 74.8 MPH :) It was a handful! The bike was a Kyosho Hang On Rider, I wish I still had it!
Well there are a number of reasons this could happen, the number 1 cause is people set the gears too tight to each other, there has to be some slop in there. The best way to deal with the gear lash is to loosen the adjustment up put a piece of paper between the clutch bell and the spur gear then slide them together. Remove the paper and your lash will be perfect. Use that technique until you get a good feel for the gear lash.
man...it must suck having people think they know what theyre talking about...and have the balls to call you out on something they know jack shit about...
I have put larger engines in other maxxes (I have one with a Ofna Picco .26 in it) nitrous is just another option. No detnation does not occur. When running nitrous exhaust pressure increases thus increasing fuel flow to the carb. According to our testing during a WOT nitrous run the engine sees 64% more fuel than it would during a non nitrous run. In over 5 years of running nitrous on RC engines I have never caused damage to an RC engine due to nitrous.
No actually nitrous oxide does not burn, there is no fuel in nitrous oxide to burn. Nitrous oxide is an oxidizer not a fuel. When the nitrous is put under heat and pressure the nitrogen and oxygen atoms break apart thus adding oxygen to the combustion chamber creating a more rapid and complete burn hence the increase in power.
Yes I used the third channel, there are no measurable effects from the nitrous system. You won't be able to get this nitrous system because I am no longer producing them.
This is pretty funny. I can hold the throttle half down and then all the way and say that that was a nitrous boost too. You're so fuckin stupid for trying to act cool by sayin you got nitros on an rc truck. The tires on my Revo 3.3 balloon too when its going full speed on the ground, not on a gay ass stand
1994JUSTIND 1 year ago
@1994JUSTIND Yes my revo tires balloon at full speed as well, however I can assure you that was not half throttle going to full. Apparently you did not actually watch the video. I am actually going to be fitting my Revo with nitrous in the next couple days and will be updating my videos. Thanks for the comment and watching my videos.
itsgr82bl8 1 year ago
@itsgr82bl8 Alright dude your mad dumb if your gonna put nitrous on a Revo. My Revo 3.3 will smoke any shit you bring to it. My Revo's stock and goes 55mph. i tuned the shit out of it. You definitely didn't have the throttle all the way down. All you did was give it a little more gas and said you have nitro. I could see the throttle linkage move when you hit the gas more. If you had real nitrous, the throttle linkage wouldn't move when you hit the nitro. The engine would just rev more
1994JUSTIND 1 year ago
@1994JUSTIND You should do some research before you let your ignorance shine through like you are. The linkage you see moving is the actuator screw opening the valve for the nitrous oxide. Look a little closer you will see it. Guess what my 2.5R Revo smokes 3.3 revos on a regular basis (even my 3.3 Revo) I have been running nitro RC's for over 20 years I can assure you I know exactly what I am doing. If your in the Pacific Northwest I would be more than happy to give you a demonstration.
itsgr82bl8 1 year ago 11
is that a tmaxx and were did u get tha nos kit oh and have u also seen the super chargers for them
rigthguard420 1 year ago
@rigthguard420 Yes that is a T Maxx, the nitrous kits are no longer available. I am aware of the superchargers they work however at the cost of blowing tons of raw fuel out of the exhaust and very difficult tuning.
itsgr82bl8 1 year ago
not the real remote....
JrEtrnty 1 year ago
@JrEtrnty LOL thats funny cause I could have sworn it was, thanks for pointing that out to me I will try and find the real one next time for sure!
itsgr82bl8 1 year ago 18
Bullshit it shifted into 2nd gear what a fagit
brocklebouef 2 years ago
@brocklebouef Umm, it shifted into 2nd gear then I hit the nitrous oxide, go back watch the video again. Nothing fake at all this is nitrous oxide injection. Take a look at my other nitrous oxide videos as well.
itsgr82bl8 2 years ago
this is so much bs i saw you switch the switch on the reverse module.fake shit
WhatAreWeDoingForFun 2 years ago
@WhatAreWeDoingForFun The nitrous kit is hooked up to the third channel, reverse is locked out on this maxx. I intentionally put my hand in the view so you could see when I activated the nitrous. Nothing fake there.
itsgr82bl8 2 years ago
i have a rustler vxl i was hoping to get into nitro soon! unfortunetly im 14 so i cant pay for it
yet....
smartguy13v 2 years ago
That's one of my favorite DC Talk songs. Nice vid.
myrabbitmoose 2 years ago
thats prety fucking sweet
wolfinthesno 2 years ago
Ballooning noted.....
now what?
timbulb 2 years ago
please note the tyers balooning um my stock savage 25 makes them baloon
mini1000dandan 2 years ago
NO KIDDING WOW!!! Your "stock" savage also has a big block on it, this maxx has a Pro .15 your savage has a lot more power than this older maxx, and guess what this old stock maxx with nitrous stomped a Savage with an XTM 247 Pro.
itsgr82bl8 2 years ago
yer my salvage is still old there have been 9 diffrent salvages since mine and mine is running 2 rich
mini1000dandan 2 years ago
and it still has a larger more powerful engine than the old Maxx did, the point of the ballooning tires is the stock Pro .15 won't balloon them that much after the truck is already at WOT without nitrous. That engine was spinning the tires as fast as it could, hit nitrous and all of a sudden the RPMs go up enough and fast enough to get the tires to balloon.
itsgr82bl8 2 years ago
any way i thnk that i can conclude that nitro rc cars are a lot of hassle that eletric
mini1000dandan 2 years ago
Well if you don't know what your doing with nitro they are a hassle.
itsgr82bl8 2 years ago
Sorry I didn't mean to delete your last comment, clicked remove instead of reply. Anyway you have a built in primer, while cranking the engine over (either via pull start or roto start) place your finger over the exhaust pipe (without your glow starter attached) this will prime your engine. It only take 3 or 4 cranks to get her primed. Works like a charm!
itsgr82bl8 2 years ago
why dont they tell u this in the manual god dam it im gettin it out tomoz now :)
mini1000dandan 2 years ago
lol, I really don't know you do have to be careful to not flood it using this technique, it's a little hard to flood a big block though so your in luck. Works really well and you don't have to taste nitro methane every time you wanna run your truck. I've been in the hobby now for 16 years, I guess you just pick up on things :)
itsgr82bl8 2 years ago
have u seen the new savge that funs on batterys thats probs faster than mine
mini1000dandan 2 years ago
Yeah I have seen the e savage, it's cool electric is a blast too! I ran a motorcycle with a 6800kv castle creations brushless setup with an 11.2 LiPoly battery pack. We radar confirmed that little bike a 74.8 MPH :) It was a handful! The bike was a Kyosho Hang On Rider, I wish I still had it!
itsgr82bl8 2 years ago
you said u have picked up a lot of tips do u know any possible reasons that the spur gear keeps being striped i whent through 6 in 3 months
mini1000dandan 2 years ago
Well there are a number of reasons this could happen, the number 1 cause is people set the gears too tight to each other, there has to be some slop in there. The best way to deal with the gear lash is to loosen the adjustment up put a piece of paper between the clutch bell and the spur gear then slide them together. Remove the paper and your lash will be perfect. Use that technique until you get a good feel for the gear lash.
itsgr82bl8 2 years ago
but much more fun
bloodseedrums 2 years ago
man...it must suck having people think they know what theyre talking about...and have the balls to call you out on something they know jack shit about...
keep up the good work man...great vid
No0nesHero 2 years ago
thats pritty cool!! i want one!! and what dose it cost to run nos and get it refilled
UrbanAnarchist44 2 years ago
nice homemade dyno dude :)
2fast4u324 2 years ago
one first thing, why wouldn't u fit a bigger engine to it in the first place ???
nitrous will detonate the engine as theres no extra fuel going in to deal with the added air ?
pilotboy84 3 years ago
I have put larger engines in other maxxes (I have one with a Ofna Picco .26 in it) nitrous is just another option. No detnation does not occur. When running nitrous exhaust pressure increases thus increasing fuel flow to the carb. According to our testing during a WOT nitrous run the engine sees 64% more fuel than it would during a non nitrous run. In over 5 years of running nitrous on RC engines I have never caused damage to an RC engine due to nitrous.
itsgr82bl8 3 years ago
nitro oxide burns mate, but i wouldnt do it.
madaboutrc 3 years ago
No actually nitrous oxide does not burn, there is no fuel in nitrous oxide to burn. Nitrous oxide is an oxidizer not a fuel. When the nitrous is put under heat and pressure the nitrogen and oxygen atoms break apart thus adding oxygen to the combustion chamber creating a more rapid and complete burn hence the increase in power.
itsgr82bl8 3 years ago
i thought nitrous oxide could burn in absence of oxygen, thats why it did not need extra air to make the engine run faster.
airoscar 2 years ago
Nitrous does not burn itself, it adds oxygen to the combustion chamber it still needs fuel to burn.
itsgr82bl8 2 years ago
RAW HORSEPOWER
mufflerbearin 3 years ago
That's psycho (in a good way)
babyfoodeater 3 years ago
Looks like you are doing a fine job cool vid
frnkenstien 3 years ago 2
Yes I used the third channel, there are no measurable effects from the nitrous system. You won't be able to get this nitrous system because I am no longer producing them.
itsgr82bl8 3 years ago
Did you use the third channel shift switch for the NOS. What are the effects of using this NOS System. I am getting it for my Nitro Rustler
bmx5566 3 years ago
dude y is the gas brown?
SgtJUSTIN1 3 years ago
That is Odonnel fuel, it just turns brown stuff runs great though!
itsgr82bl8 3 years ago
i wana see it drag lol
arch3rkid0 4 years ago