I BUILT ONE BUT MY MOTOR WON'T KEEP SPINNING................I'M GETTING CURRENT RUNNING THROUGH THE CIRCUIT AND COIL BUT MOTOR DOSEN'T CONTINUOUSLY RUN.....ANY POINTERS?
Free inexhaustible energy is real!But the powerfull Oil business won't alow common ppl to know this,Find this technology at LT-MAGNET-MOTORdotCOM ,The revolution begins!
Nice set up, I like the fact that your work area is not a mess. For shooting your video's try a camcorder tripod. Have you tried any other type magnets other than the neo's?,there seems to be some confusion as to what type to use, from other peoples video's, it's not always clear.
The Modified SSG I built uses the discarded wheel from a high-end ten speed and with correct spacing used 12 magnets. I have the following gauges that I use to measure input and output temporary hook-up. Volts, Amps and Watts. I use an oscilloscope to see the output spike! That charges batteries. The slower it goes the BETTER it charges batteries. I have also restored, now three 12 volt batteries that were long past their useful life. Try it, it is awesome!
Sorry I did not respond sooner. It has been a while since I have logged into this account. The motor works fine on its own. If you disconnect the secondary battery, then I suggest putting a resistor in its place.
Sorry for the late response.... I did later run the batteries for about a week. I would swap the power and charging batteries when the power battery was running very low. Overunity would have been observed here if I had noticed a net increase OR constant net charge between the two batteries. Unfortunately, I observed a net decrease in the system. This means that my version of this bedini circuit system lost energy. After about a week of swapping the batteries, the motor stopped working.
So what is it supposed to do? You have an energy input in the form of a battery. Is it more efficient than ordinary motors or what? How long does it run for on a single 9 v battery?
I agree, we cannot rewrite those laws... however, modifications could be made and will be made as we understand the relationship between magnetism and electricity further.
The system was designed for a 12 v battery. If you used a lower voltage, then you may need to reconfigure the components. The circuit is supposed to create more energy than it uses. However, I have not observed this claim.
@atlantapad other people use more than 1 coil so 1 is for input known as trigger coil and the other(s) will be known as collectors will this help also witj use of capacitors at the very least may boost more power will it not?
@tjamassey They 'can' produce more power but you need multiple coils around the spindle. This type of setup is mostly used to charge dead nonchargeable batteries by absorbing the fly-back power from the coil's field collapsing.
I would like to hear more about your suggestion on the ratios. I imagine this would improve the amount of back emf current I collect to charge the charging battery.
check out my rotor - very similar to yours
mine does not make any noise
yours got a cool look - thanks for sharing
pkrska 8 months ago
This has been flagged as spam show
I BUILT ONE BUT MY MOTOR WON'T KEEP SPINNING................I'M GETTING CURRENT RUNNING THROUGH THE CIRCUIT AND COIL BUT MOTOR DOSEN'T CONTINUOUSLY RUN.....ANY POINTERS?
333kgb 10 months ago
This has been flagged as spam show
Free inexhaustible energy is real!But the powerfull Oil business won't alow common ppl to know this,Find this technology at LT-MAGNET-MOTORdotCOM ,The revolution begins!
lavernedi 1 year ago
This has been flagged as spam show
Free Energy is real and its here! The Oil companies are doing everything in their power to stop these
information. If you want a Free energy machine do a search in youtube for the LT MAGNET MOTOR , Join the
revolution!
despinapjr 1 year ago
Nice set up, I like the fact that your work area is not a mess. For shooting your video's try a camcorder tripod. Have you tried any other type magnets other than the neo's?,there seems to be some confusion as to what type to use, from other peoples video's, it's not always clear.
wsal758 1 year ago
The Modified SSG I built uses the discarded wheel from a high-end ten speed and with correct spacing used 12 magnets. I have the following gauges that I use to measure input and output temporary hook-up. Volts, Amps and Watts. I use an oscilloscope to see the output spike! That charges batteries. The slower it goes the BETTER it charges batteries. I have also restored, now three 12 volt batteries that were long past their useful life. Try it, it is awesome!
MagAirCar 1 year ago
does the motor work on its own?
nupagadi2006 2 years ago
Sorry I did not respond sooner. It has been a while since I have logged into this account. The motor works fine on its own. If you disconnect the secondary battery, then I suggest putting a resistor in its place.
atlantapad 1 year ago
i know im responding to an old post,BUT, what did you determin was going on with the batts,were they or it being recharged? thanks.
smr1967 2 years ago
Sorry for the late response.... I did later run the batteries for about a week. I would swap the power and charging batteries when the power battery was running very low. Overunity would have been observed here if I had noticed a net increase OR constant net charge between the two batteries. Unfortunately, I observed a net decrease in the system. This means that my version of this bedini circuit system lost energy. After about a week of swapping the batteries, the motor stopped working.
atlantapad 1 year ago
So you made an electric motor. I assume that the main coil fires when the sensor coil feels the magnet coming.
RavenPrecept 2 years ago
Correct.
atlantapad 1 year ago
So what is it supposed to do? You have an energy input in the form of a battery. Is it more efficient than ordinary motors or what? How long does it run for on a single 9 v battery?
tjamassey 2 years ago
This is very efficient, you can run it weeks on this, while you charge the SECOND batery!
nltubeyou 2 years ago
yeh right! You cannot re-write the laws of thermodynamics captain!
tjamassey 2 years ago
I agree, we cannot rewrite those laws... however, modifications could be made and will be made as we understand the relationship between magnetism and electricity further.
atlantapad 1 year ago
The system was designed for a 12 v battery. If you used a lower voltage, then you may need to reconfigure the components. The circuit is supposed to create more energy than it uses. However, I have not observed this claim.
atlantapad 1 year ago
@atlantapad other people use more than 1 coil so 1 is for input known as trigger coil and the other(s) will be known as collectors will this help also witj use of capacitors at the very least may boost more power will it not?
Jamieduk999 7 months ago
@tjamassey They 'can' produce more power but you need multiple coils around the spindle. This type of setup is mostly used to charge dead nonchargeable batteries by absorbing the fly-back power from the coil's field collapsing.
TakronRust 2 months ago
lol)))
giacotey 3 years ago
well done man, keep us posted with your progress
dodoshlodo 3 years ago
Great vid!
Keep up the good work, really like to see uploads about the charging of the secundary battery.
James
drsjamesserra 3 years ago
Very nice build indeed. You now need to work on your ratios for maximum output vs your input from the primary.
Pwordchernoir 3 years ago
I would like to hear more about your suggestion on the ratios. I imagine this would improve the amount of back emf current I collect to charge the charging battery.
atlantapad 1 year ago
Thanks! I appreciate the comment.
atlantapad 3 years ago
hell of alot better than my first build! Good work!
introvertebrate 3 years ago
geez u got a good wrap didn't u, i've never heard the word "introvertebrate" that many times in 5 mins before!
dodoshlodo 3 years ago
LoL... I had to give him proper credit. If not for him, I would never even built it or got it to work.
atlantapad 3 years ago
yeh true I've been subscribed to his channel for a while, in fact there's lots of dudes who have really helped me:
Daftman of course, Zeropointprophet, ray0energy, devitoob, kubikop, skeptic33, skycollection, truthbeeknown, pwordchernoir........ and a few others.
Check some of these guys out
dodoshlodo 3 years ago