Awesome dude, the 3SGTE is an incredible engine :)
Really good job, you must had a lot of work doing that...
But I have a question, I don't recognize your car and don't know the "Toyota GT" ? Does it have another name ? Cause I dont think we have this model in Europe...
@sahin1160 if you think it is a 4AGE look at the cam gap it way to big and it dont rev quick or sound like the 4AGE. the 4AGE can not idle that good at that low of rpm i think it would cut off. the only way if thay change the head valve numbers/ or thay reduced compression ratio (i think thay did lower it for the that big turbo if thay did not thay should try). other than that dont know how u tell.
hey man wondering what up grades you have in the engine also name of the manafold your using? i have a 92 toyota celica with 3sgte engin out of a mr2 in it . just running stock turbo have upgrade valvle and valve springs and down pipe, exhaus, stand alone engine management system, nock dector.. etc, planning on gettin a manifold and turbo next. them maby some internals. runnin 17 psi now. sick engin also what cams and cam wheels r you using.
hey man Im putting a GT4 engine in my Toyota Celica GT what size is the turbo on the standard GT4 engine? Im thinking of upgrading that turbo when I have it installed or just leave it and get used to the extra power and then upgrade it
@mibrum hi sorry for asking I have a celica vvti in the usa its a celica gt 2001 model (the KIT, style bonnet). Im getting a 3sgt engine swap and using the GT4FOUR AWD system to get it past the 300bhp mark. My question I want it to be around the same torque and power as a Viper GTS something at that level. I've already got brembo's but in terms of power and tuning parts what would you recommend? Im after huge turbo boost and a souped up car sound that sounds sexy when your going through a tunle
what type of transmission did u use can u use a beams rwd? oh and that engine is the shit i had an 91 mr2 24lb of boost took it never broke down 60 shot of nitrous stock o the turbo was massage but other than that bone stuck whit bcc and it was a demond
I do not know the cost at yout place but all you have to do is take a Toyota 2C bellhousing and do a sanwitch spacer between the transmission and the bellhousing and it will be good.
Good work in making the oil pick up work with the engine in that position.
videorage 3 months ago
this sounds and look badass.
beluga420 5 months ago
how many horses does this baby have?
298916 8 months ago
@298916 they come 250hp stock. from the bigger turbo and other shit, probably closer to 350
canuckaholic91 7 months ago
arn't 3SGTE a front wheel drive engine?
eclipsegsx765 1 year ago
@eclipsegsx765
The engine has nothing to do about front wheel drive, 4x4 or rwd... The gearbox indicates if its fwd,rwd or awd
caloo1982 1 year ago
Awesome dude, the 3SGTE is an incredible engine :)
Really good job, you must had a lot of work doing that...
But I have a question, I don't recognize your car and don't know the "Toyota GT" ? Does it have another name ? Cause I dont think we have this model in Europe...
MoTT1234 1 year ago
I have a Mr2, in the process of a similiar build... Im guessing this car is between 480-600 hp?
ajh1031 1 year ago
Comment removed
0612sannikola 1 year ago
What type of differential and sub frame did you put in the rear ?
B.D. W nice built.
0612sannikola 1 year ago
its not a 3s gte - its a 4a ge engin
sahin1160 1 year ago
@sahin1160
This is a 3SGTE engine I think you do not now the difference and how they look....
mibrum 1 year ago 3
@mibrum
but it looks how a 4a ge engin
sahin1160 1 year ago
@sahin1160 its a 3sgte, its sideways dumbass, i wonder what drivetrain they use???
64efa 1 year ago
@sahin1160 if you think it is a 4AGE look at the cam gap it way to big and it dont rev quick or sound like the 4AGE. the 4AGE can not idle that good at that low of rpm i think it would cut off. the only way if thay change the head valve numbers/ or thay reduced compression ratio (i think thay did lower it for the that big turbo if thay did not thay should try). other than that dont know how u tell.
gatorage850 1 year ago
@sahin1160 lol.
1gt4dude 9 months ago
is that a gt30 ????
draculaS2k 1 year ago
Hi!
which kind if exhaust manifold is used?
sklopendra 2 years ago
thats a real nice motor setup!
what oilpan did you use? Ive heard that if you use the stock oilpan then the motor does not get lubricated properly or something like that.
nid4speedboy 2 years ago
hey man wondering what up grades you have in the engine also name of the manafold your using? i have a 92 toyota celica with 3sgte engin out of a mr2 in it . just running stock turbo have upgrade valvle and valve springs and down pipe, exhaus, stand alone engine management system, nock dector.. etc, planning on gettin a manifold and turbo next. them maby some internals. runnin 17 psi now. sick engin also what cams and cam wheels r you using.
notingXworks 2 years ago
Hi,
The engine have the usall upgrades such rods,pistons,1mm oversize valves, big cams,shimless buckets,hks gasket and midl port and polish.Turbo T76.
The exhaust manifold have been fabricated by us since we had to do mods to fit in the large turbo.
It is running on a TEC3R Managment system and running 25-29psi boost too much power.
mibrum 2 years ago
hey man Im putting a GT4 engine in my Toyota Celica GT what size is the turbo on the standard GT4 engine? Im thinking of upgrading that turbo when I have it installed or just leave it and get used to the extra power and then upgrade it
jamesthq 2 years ago
@mibrum hi sorry for asking I have a celica vvti in the usa its a celica gt 2001 model (the KIT, style bonnet). Im getting a 3sgt engine swap and using the GT4FOUR AWD system to get it past the 300bhp mark. My question I want it to be around the same torque and power as a Viper GTS something at that level. I've already got brembo's but in terms of power and tuning parts what would you recommend? Im after huge turbo boost and a souped up car sound that sounds sexy when your going through a tunle
jamesthq 1 year ago
what type of transmission did u use can u use a beams rwd? oh and that engine is the shit i had an 91 mr2 24lb of boost took it never broke down 60 shot of nitrous stock o the turbo was massage but other than that bone stuck whit bcc and it was a demond
hondahx 2 years ago
Hi,
The transmission is a Richmond 5 speed and the engine is only on boost.
mibrum 2 years ago
richmond what about the bell housing im tryng to do the same thing i have a 3sgte rwd so the richmond whit the stock bell housing what do they cost?
hondahx 2 years ago
I do not know the cost at yout place but all you have to do is take a Toyota 2C bellhousing and do a sanwitch spacer between the transmission and the bellhousing and it will be good.
mibrum 2 years ago
3sgte, the forgotten motor.
You don't hear about these too much anymore because everyone is out building an SR or an RB or 2J or something.
flip3d 2 years ago
not so forgotten than you think
a pretty fucked up one still cost over 1k^^
Maxrev 2 years ago
men u have a badass car
josephayal 2 years ago
is it a 4wd or rear?
panavilllas 2 years ago
RWD Rear wheel drive...
mibrum 2 years ago
Beautiful car
fatoni698 2 years ago
very very good jop... i loved
panavilllas 2 years ago
dosnt no air filter stuff up engines or clog them up with gunk or is it all sweet using no filter
directordc 2 years ago
How did you get to it mount, I 've tried on a past project an it sucked. The car is awsome
22rtedave 3 years ago
nice.
tuckntiremaz 3 years ago
that valve cover is sick
TimQuerry 3 years ago
!!!! wow!!! love it
cutesk8erboy 3 years ago