@Fatherof123 if you will only buy one gun, then might I suggest the IWATA Eclipse(BCS)......if that is too pricey then, the next best is the PEAK X-3 available at BEARAIR.COM......
@airbrushwres Thanks for the advice there both at a good price i think and the peak looks nicer to me anyway. just an extra question what compresser should i get they all seem the same :S oh and i would like so see a t-shirt with a full blown metal terminator with the red eyes cheers airbrushres !!
@Fatherof123 .....well if noise is not an issue , then a compressor with a tank from HOME DEPOT is good.....about $100 - $200 ....depends how big .....if you need quieter, then a silent compressor from Jun Air is my choice!
all i can say is wow... i am amazed by the work you that you do... keep on doing what you doing... thanks for sharing this vid i hope to see more and some more amazing work
Hey man I just found this. Awesome work dude. Hey, how do you lay the white down on the black shirt? Seams when I try it I get too much of a build up before I get it as white as I want. Makes the shirt all stiff. Thanks.
@chromewarrior555 ....Yeah , the shirt will stiffen up a bit with layers of white but make sure to "hot iron" the base on the reverse side of the shirt....or "heat press" it .....once the base has been practically melted into the shirt , it softens up a bit and will be ready for your work!
Bad azz venom sweater !! You made dis venom sweater famouse by postin it on youtube, lucky customer lol. How long did it take you to do this venom sweater? How much did u charge 2 do this venom sweater? thanx fo da helpful vid and info Wres
Bad azz venom sweater !! You made dis venom sweater famouse by postin it on youtube, lucky customer lol. How long did it take you to do this venom sweater? How much did u charge 2 do this venom sweater? thanx fo da helpful vid and info Wres
You can thin the paint slightly, for white shirts.....on a black shirt, you may not......also , press the shirt (iron or heat press) , it will smooth down the build up.
i have an iwata hp bcs and my stupid brother put spray paint on it and it got clogged but i fixed it and now its spitting alot and when i push the trigger down i should only get air but i get paint...please help !
no panic! use paint thinner to clean spray paint......then use the airbrush cleaner (CREATEX brand) to rinse and clean some more......make sure your tip is not cracked or damaged....also make sure that the air cap it tight.....sometimes little paint flakes can cause spitting......guns are very personal, keep away from lil' brothers!
WOW
ajfrost1985 4 months ago
nice work
AirbrushDGart 6 months ago
@AirbrushDGart Thank You!
airbrushwres 6 months ago
awesome.
BankaiDragonuv 1 year ago
Whata venom!! the dark knight joker is even better i think and im buying an airbrush soon any tips any one ?
Fatherof123 1 year ago
@Fatherof123 if you will only buy one gun, then might I suggest the IWATA Eclipse(BCS)......if that is too pricey then, the next best is the PEAK X-3 available at BEARAIR.COM......
airbrushwres 1 year ago
@airbrushwres Thanks for the advice there both at a good price i think and the peak looks nicer to me anyway. just an extra question what compresser should i get they all seem the same :S oh and i would like so see a t-shirt with a full blown metal terminator with the red eyes cheers airbrushres !!
Fatherof123 1 year ago
@Fatherof123 .....well if noise is not an issue , then a compressor with a tank from HOME DEPOT is good.....about $100 - $200 ....depends how big .....if you need quieter, then a silent compressor from Jun Air is my choice!
airbrushwres 1 year ago
@airbrushwres Thanks again ill keep updated with u on your awesom work dude ! :)
Fatherof123 1 year ago
Amazing stuff, what a fantastic talent keep it up!!!!!
DarrenHoltom 1 year ago
all i can say is wow... i am amazed by the work you that you do... keep on doing what you doing... thanks for sharing this vid i hope to see more and some more amazing work
darkman602 1 year ago
Hey man I just found this. Awesome work dude. Hey, how do you lay the white down on the black shirt? Seams when I try it I get too much of a build up before I get it as white as I want. Makes the shirt all stiff. Thanks.
chromewarrior555 1 year ago
@chromewarrior555 ....Yeah , the shirt will stiffen up a bit with layers of white but make sure to "hot iron" the base on the reverse side of the shirt....or "heat press" it .....once the base has been practically melted into the shirt , it softens up a bit and will be ready for your work!
airbrushwres 1 year ago
Yeah! Rob Zombie is hardcore!
bf2hl 1 year ago
Bad azz venom sweater !! You made dis venom sweater famouse by postin it on youtube, lucky customer lol. How long did it take you to do this venom sweater? How much did u charge 2 do this venom sweater? thanx fo da helpful vid and info Wres
colorz1arte 1 year ago
Bad azz venom sweater !! You made dis venom sweater famouse by postin it on youtube, lucky customer lol. How long did it take you to do this venom sweater? How much did u charge 2 do this venom sweater? thanx fo da helpful vid and info Wres
colorz1arte 1 year ago
do you sell the shirts on any sites or anything?
XSexualPanda 1 year ago
@XSexualPanda i mean airbrush design
XSexualPanda 1 year ago
This is just awesome!
amilcar15 1 year ago
thats bad ass dude
pepsiorangepepsi 1 year ago
Very Nicccccccccccccccccccccccccccccccccccccccccccccccccccccce!
agnettis 1 year ago
@agnettis , ThhhaaannKKS! :)
airbrushwres 1 year ago
quando for fazer um video tire essas letras da frente pois nao da pra ver nada !!
marcusoi3 1 year ago
very good work but i hate the first 3 minutes to watch ,..yuck
anyway ,..thanks for posting ;-)
TheArsong 2 years ago
thanks for watchin' anyhow.....
airbrushwres 2 years ago
You can thin the paint slightly, for white shirts.....on a black shirt, you may not......also , press the shirt (iron or heat press) , it will smooth down the build up.
airbrushwres 2 years ago
i have an iwata hp bcs and my stupid brother put spray paint on it and it got clogged but i fixed it and now its spitting alot and when i push the trigger down i should only get air but i get paint...please help !
thanks
juanjo12el 2 years ago
no panic! use paint thinner to clean spray paint......then use the airbrush cleaner (CREATEX brand) to rinse and clean some more......make sure your tip is not cracked or damaged....also make sure that the air cap it tight.....sometimes little paint flakes can cause spitting......guns are very personal, keep away from lil' brothers!
airbrushwres 2 years ago
are u using an iwata hp bcs ?
juanjo12el 2 years ago
Yes , I am ....I also use other guns......
airbrushwres 2 years ago
which air brushes do u use pashaae
TIMS122000 2 years ago
Yeah , I use Paasche, Badger, Vegas and my favorite Iwata! I mostly use and recommend IWATA brand.
airbrushwres 2 years ago
very nice!!! great work!!!! did anyone ask u to paint spawn and how much does something like this cost?
13rista 2 years ago
WOW
Thats mad crazy detail!!!!
Awesome!
*****
AmandaDelight 2 years ago
Your work is so good but I wish I could see more of the process without your (.com) across it constantly.
jasborunda 2 years ago
I will have these available soon for download.....they will be in real time without watermarks and narrated.....
airbrushwres 2 years ago
how long did this masterpiece take? if i tried to conquer something like this it would take me 3 hours lol to get 50% of ur detail.
hawksairbrush 3 years ago
That is one sick Venom! Great job!
fanCLUB76 3 years ago
Awesome job.
SP1D3RxV3N0M 3 years ago
Thank you!
airbrushwres 3 years ago
no prob.
SP1D3RxV3N0M 3 years ago
i see ur vids and thought i had a favorite but evrytime u post a new vid i like it more than the previous. great work.
hawksairbrush 3 years ago
Thanks again Hawk! I try my best , glad you like!
airbrushwres 3 years ago