@CrosmanM417 I don't see why not it should mount on the top rail just fine. It might be kind of overkill though but if you have the money to spend than go for it.
i just ordered one of these today, so i was curious to see a review. so far it looks like a pretty damn solid scope. Im eager to test it out on my rifle when it comes in.
can you sight it in and then take the adjuster tourits off and set those to zero? i saw the allen screws on them, didn't know if that is what they were for
@rturpening The allen screw is some sort of zero resetting screw which allows you to disengage the windage and adjustment knobs without messing up your zero. Its so you can align the zero on the adjust knob back up with the dot on the ring while having your rifle zeroed. If that makes any sense, its tricky to understand and would probably only do this if I had to adjust the settings alot. Nice feature so you know where zero is and you don't have to sight it back in. : )
@bobthebadash hay man did u get that scope for ur remington 700 .270 and did i keep its zero, iv been wanting to get one for my savage 3006 but i dont want to get one if it dont keep its zero
i just put this scope on my savage 17 hmr, and at 25 and 50 yard it does great, but at 100 yard having some trouble getting it zeroed. Is there any thing i can do and do you have any trouble sighting yours in
@thomaswalters719 I sighted mine it at 50yards to start and when I shoot it at 100yrds it is high by atleast a few inches. Mines on a .223 rifle. 17hmr is not the biggest round in the world so it might be getting pushed around by wind or might be droping at 100yards. A good way to tell how your round is going to fly is to use the winchester ballistics calculator on their web sight. At 100yards you have to have a steady aim becuase the rifle movement and scope movement is going to be amplified.
Hey man i was wondering, ya know the range card that came with it that tells u all the stuff about range estimating with the milldot reticle well i know the formula and everything and im familiar on bow to do it but i lost the card and i dont know what power to set the scope to so i can range estimate if u know it help me out. Thanks
@Jake93r17 Sure I got the card. It says to set the power on the scope to 10x for estimating range with the mildots. If you need anymore help send me a message. Thanks for watching.
Hey thanks for the video I've been looking at scopes for a couple days now for a remington 700 .270 and for the money this sounds like the scope for me. So thank you
@MaartenOwnd It is able to focus at 5,10,20,35,50,100 and infinity yards, It should be good it is really clear and I have shot with it at 25 yards to start and it was fine.
do u have to have batteries to use it without the red or green sight?
RepForNY 1 week ago
@RepForNY Nope the batteries just turn the red and green on and it comes with batteries, its a cool feature but not that practical.
Josh2448music 4 days ago
@Josh2448music thanks for the help!
RepForNY 3 hours ago
thanks for the review, i have a savage axis as well and i was wondering if it would work on my gun
saddrums 1 month ago
Could i put this on my Crosman M417 PLEASE ANSWER
CrosmanM417 2 months ago
@CrosmanM417 I don't see why not it should mount on the top rail just fine. It might be kind of overkill though but if you have the money to spend than go for it.
Josh2448music 1 month ago
i just ordered one of these today, so i was curious to see a review. so far it looks like a pretty damn solid scope. Im eager to test it out on my rifle when it comes in.
rjdrums26 2 months ago
i just got the scope scope and the sights are amazing i love it especially the red and green illumination
mcweezybeast 2 months ago
How many mildots r on the x axis? Thanks
ModernMan316 2 months ago
can you sight it in and then take the adjuster tourits off and set those to zero? i saw the allen screws on them, didn't know if that is what they were for
rturpening 3 months ago
@rturpening The allen screw is some sort of zero resetting screw which allows you to disengage the windage and adjustment knobs without messing up your zero. Its so you can align the zero on the adjust knob back up with the dot on the ring while having your rifle zeroed. If that makes any sense, its tricky to understand and would probably only do this if I had to adjust the settings alot. Nice feature so you know where zero is and you don't have to sight it back in. : )
Josh2448music 2 months ago
@MrCoolskills86 There is 6 mildots on one side, 6 to the left of center, 6 above center and so on.
Thanks for watching
Josh2448music 3 months ago
does this work on an air rifile?
Elliot890x 4 months ago
@Elliot890x I don't see why not aslong as your air rifle has scope rails which are the two indented parallel lines on the top of your rifle.
Josh2448music 4 months ago
@bobthebadash hay man did u get that scope for ur remington 700 .270 and did i keep its zero, iv been wanting to get one for my savage 3006 but i dont want to get one if it dont keep its zero
treverlid87 4 months ago
i just put this scope on my savage 17 hmr, and at 25 and 50 yard it does great, but at 100 yard having some trouble getting it zeroed. Is there any thing i can do and do you have any trouble sighting yours in
thomaswalters719 7 months ago
@thomaswalters719 I sighted mine it at 50yards to start and when I shoot it at 100yrds it is high by atleast a few inches. Mines on a .223 rifle. 17hmr is not the biggest round in the world so it might be getting pushed around by wind or might be droping at 100yards. A good way to tell how your round is going to fly is to use the winchester ballistics calculator on their web sight. At 100yards you have to have a steady aim becuase the rifle movement and scope movement is going to be amplified.
Josh2448music 7 months ago
Hey man i was wondering, ya know the range card that came with it that tells u all the stuff about range estimating with the milldot reticle well i know the formula and everything and im familiar on bow to do it but i lost the card and i dont know what power to set the scope to so i can range estimate if u know it help me out. Thanks
Jake93r17 7 months ago
@Jake93r17 Sure I got the card. It says to set the power on the scope to 10x for estimating range with the mildots. If you need anymore help send me a message. Thanks for watching.
Josh2448music 7 months ago
@Josh2448music
I lost my cared as well, is there any way you could post a pic of the card/
TheJhhunter4 4 months ago
@TheJhhunter4 Sure I will make a video or something tomorrow when I get home and put it online for ya.
Josh2448music 4 months ago
@TheJhhunter4 I tryed to put some pics of the card in a video there is a link in this video on left top side of screen.
Josh2448music 3 months ago
Hey thanks for the video I've been looking at scopes for a couple days now for a remington 700 .270 and for the money this sounds like the scope for me. So thank you
bobthebadash 7 months ago
@bobthebadash Glad to help, thats why I made the video, thanks for watching.
Josh2448music 7 months ago
I just found out about this scope today and at the same time you post this video. Great timing, thanks for the vid :D
MaartenOwnd 8 months ago
@MaartenOwnd No problem dude, glad to help, you won't be disappointed with the scope!
Josh2448music 8 months ago
@Josh2448music Hey bud, do you know if this is a nice scope at 15 or 30 yards? Greets
MaartenOwnd 8 months ago
@MaartenOwnd It is able to focus at 5,10,20,35,50,100 and infinity yards, It should be good it is really clear and I have shot with it at 25 yards to start and it was fine.
Josh2448music 8 months ago
@Josh2448music Awesome, thanks alot! :D
MaartenOwnd 8 months ago