@nitrous383 The reason people think they are hot rods is they are perfect to build into a hot rod...will take the big engines and they have a strong little body which will handle the power...nuff said...
people 'act' like these are hot rods because its simple as fuck to put a real motor in these cars .. there old school 80's chevys which almost all had v8 options and are lightweight, decent looking boxy cars. Shove a real v8 in them and they move
@JokerRIPLedger thats the whole point. look at all these dudes with the imports. 9 out of ten of those cars ran 17's and had about 120 horse stock. these malibus were the last full frame chevelles. i know a dude runs a junkyard, crushed 10 of these a day back in the 80's. he said if he can find just a clean pair of doors now hed get at least 850.00 good platform to build on.
lol LOOK at you so proud!! lmfao dude im the same way man!!! smiles:) look at what i did! i love it! cool ride bro 5 STARS!!!!! but i cant do it becuse you dis the rateings :(
ya do it dude! i have them and it kicks up a little dust and the look and sound is a tad better! :) but ya might get some drone :( drill some holes in the turn downs if ya get the drone!
Why are people bothering with 383 strokers? For same effort you can have a 415 small block. Speed o Motive has the stroker kit. And the 400 is still around.
Everyone has their own situation/preference I guess. I had the motor already so I just made some changes to make it a little better. It runs well and I'm happy with it.
nice motor. I just finished a 355 .30 over build and I'm about to start on a 383. Did you have to do any machining to the 350 block? I'll be dropping it into a 1982 Camaro. Thanks for the input.
Gorgeous car. I inherited the family '79 when I was in college. It was four door but probably the best highway car I've ever had. I sold it for 500 bucks after the transmission began acting up and I kick myself now.
I said it is a relatively small cam. Granted it is a decent size for a street car (which is what this is), but believe me, this cam is relatively small compared to what a lot of guys run....
Thanks. They are 28x11.5x15 M/T's. Didn't have to touch the frame, just had to use wheel spacers and they fit right in. The driver's side will rub very, very slightly on left turns, especially because I run low air pressure in them. If you plan on going 28x12.5, then you'll most likely have to notch the frame.
lol....actually you're right. I am the second owner and bought it from an 85 year-old woman back in '97. It was a 305 4 bbl with a 2.28 rear. I ran it when I first bought it and it went 17.0. lol...
Haha yeah the 305 was never really known for its performance - but you fixed that problem on your 'Bu! Those 305 engines are super reliable though my uncle had one in his old '84 bonneville and it lasted almost 300,000 miles. I guess when you only have 150 horsepower theres really not a whole lot to go wrong lol
nice, i have a 78 455 bigblock, sssooooo custom, very fast, very LOUD. side dual 4" pipes, ive got pumps hooked to a toggle under seat that folds down plates, 2 battery for stereo (both hooked to alternator on toggle) 79 rear end, re done interior, lots of plexy glass and neons. only thing, its a 4dr, but it a corvette killer! check it out.
Hey nitro.. great car man... this is MalibuMan1979.. (my malibu reving). Mine is a mild 350 w/350 trans. I am planning a 383 build this winter.. we will see. love your pipes, (flowmasters?). any way ,'G cars rock'...
nice. mine's an 80 landau classic with a 4 barrel 305. the muffler fell off a few weeks back, sounds pretty sweet without it haha might just leave it like that and put a pipe out the back.
motor is out....found a donor car
nitrous383 10 months ago
really nice car ! i am jealus right now ..lol
oohklu 11 months ago
Installed turndowns last year. The car is quieter believe or not...but sounds good. Gonna add a new video soon.
I might put this motor in another car and make this one more of a cruiser so I can drive it to work, etc and not break the bank on gas money.
nitrous383 1 year ago
What did you record with??? My sound quality is pittiful!
nastechengineering7 1 year ago
SWEETNESS!!! I LOVE IT!!! I HOPE MY BUICK 455 RUNS A SMOOTH.
nastechengineering7 1 year ago
Avesome car !! What cam are you using??
goregrind666666 2 years ago
@goregrind666666
Thanks. Comp Cam solid flat tappet.
nitrous383 2 years ago
@nitrous383 I LOVE IT, MAN!!!!!!!
nastechengineering7 1 year ago
These malibus were just kinda like everyday economy cars im not sure why people are acting like there hotrods lol.
JokerRIPLedger 2 years ago
You're right! Economy car is an understatement. The car has the original 140 horse 305 in it.
nitrous383 2 years ago 3
@nitrous383 The reason people think they are hot rods is they are perfect to build into a hot rod...will take the big engines and they have a strong little body which will handle the power...nuff said...
Lochinvar111 1 year ago
@JokerRIPLedger
people 'act' like these are hot rods because its simple as fuck to put a real motor in these cars .. there old school 80's chevys which almost all had v8 options and are lightweight, decent looking boxy cars. Shove a real v8 in them and they move
leafsrule16 1 year ago
@JokerRIPLedger
can you not hear that badass small block
BassAccord 1 year ago
@JokerRIPLedger so the novas from the 60s that were factory v6 cars arent supposed to be made into rods? shows how smart you are dumbass!
danodell1980 1 year ago
@JokerRIPLedger just look at it.......
BaMaBoY0330 1 year ago
@JokerRIPLedger maybe back in 79 it was an econobox but compared to tadays pos "cars" it is a hotrod
ST0N3R420X420 1 year ago
@JokerRIPLedger thats the whole point. look at all these dudes with the imports. 9 out of ten of those cars ran 17's and had about 120 horse stock. these malibus were the last full frame chevelles. i know a dude runs a junkyard, crushed 10 of these a day back in the 80's. he said if he can find just a clean pair of doors now hed get at least 850.00 good platform to build on.
ineverlikethatguy 9 months ago
thanks guys
nitrous383 2 years ago
Amazing car, what is the shot of nitrous? hp all motor and hp tih nitrous? i love them, CONGRATULATIONS!
NikosGTX 2 years ago
these cars are badass. ive owned a '78 and an '80 malibu. wished i kept my '80 malibu.
lunitoonz5150 2 years ago 2
My 79 is a 4 door...wish it was a 2 door.
unexpectedpyroo 2 years ago
Sounds Good just sitting there .
MrBadrench 3 years ago
ive seen your car in brooklyn on the sunset stip, i got a muscle car becuase of yours
cutenukkah 3 years ago
exelent!!!!!!!!!!! beauti sound!!!!!
zzup3rphizyall 3 years ago
flowmaster 40?
ricardotello1 3 years ago
40 Series Delta flows
nitrous383 3 years ago
Millas chechi...!!!
campers4WD 3 years ago
thanks guys.
nitrous383 3 years ago
DAMN MAN THATS HELLA NICE!!!!
i HAVE A 79 MALIBU CLASSIC MYSELF,BUT MINE IS THE ONLY ONE I'VE SEEN WITH A LEATHER TOP.
Suarez801 3 years ago
Hey I have a 78 Malibu with a leather top.
jesse31687 3 years ago
Rice killer !!!!!!!
a81z28 3 years ago 2
lol LOOK at you so proud!! lmfao dude im the same way man!!! smiles:) look at what i did! i love it! cool ride bro 5 STARS!!!!! but i cant do it becuse you dis the rateings :(
peejaa 4 years ago
nice car.
camirocz 4 years ago
the car would sound alot better with some turn downs on them flowmasters.
d17a2 4 years ago
thought about it. still might do it.
nitrous383 4 years ago
have you ever headr pf spin tek exhaust?? a likl pricy but the best low rumble you can buy!!
doublejay80 4 years ago
yep, I have heard of Spintech. Do you know what kind of flow numbers they produce?
nitrous383 4 years ago
ya do it dude! i have them and it kicks up a little dust and the look and sound is a tad better! :) but ya might get some drone :( drill some holes in the turn downs if ya get the drone!
peejaa 4 years ago
plus ya get a little kick up of dust wich is cool looking!!! shows the high compresion :)
peejaa 4 years ago
Very nice...i have a 79 chevy malibu looks exactly like this, just trying to get a better sound out of it.
dirt56 4 years ago
Why are people bothering with 383 strokers? For same effort you can have a 415 small block. Speed o Motive has the stroker kit. And the 400 is still around.
tamapalagi 4 years ago
Everyone has their own situation/preference I guess. I had the motor already so I just made some changes to make it a little better. It runs well and I'm happy with it.
nitrous383 4 years ago
I'll do you one better. Put a 3.8 LC2 motor in there and walk the dog on big blocks.
1BadGN 4 years ago
ya gotta do better than that???
sabrom19 4 years ago
nice motor. I just finished a 355 .30 over build and I'm about to start on a 383. Did you have to do any machining to the 350 block? I'll be dropping it into a 1982 Camaro. Thanks for the input.
pflipsenta 4 years ago
Thanks. Yes the block will need to be clearanced for the rods. Any reputable machine shop can handle that easily and in a short turnaround.
Good luck with your build!
nitrous383 4 years ago
Gorgeous car. I inherited the family '79 when I was in college. It was four door but probably the best highway car I've ever had. I sold it for 500 bucks after the transmission began acting up and I kick myself now.
NewsLynne 4 years ago
Thanks!! 2 doors or four, these are cool cars. Buy another one!
nitrous383 4 years ago
is it a soild or roller?
tim9271 4 years ago
It's a solid flat tappet.
nitrous383 4 years ago
What duration and lift cam are u running in there?!? that has a nice idle.
opelgt7319 4 years ago
.520"/.540"
244/252 @050
relatively small cam....
nitrous383 4 years ago
When did .520/.540 and 244/252 become a small cam? That's bigger than the 502ho cam.
tamapalagi 4 years ago
I said it is a relatively small cam. Granted it is a decent size for a street car (which is what this is), but believe me, this cam is relatively small compared to what a lot of guys run....
nitrous383 4 years ago
nice car! what size rear tires? did you have to notch the rear?
tim9271 4 years ago
Thanks. They are 28x11.5x15 M/T's. Didn't have to touch the frame, just had to use wheel spacers and they fit right in. The driver's side will rub very, very slightly on left turns, especially because I run low air pressure in them. If you plan on going 28x12.5, then you'll most likely have to notch the frame.
nitrous383 4 years ago
Damn grannys malibu has some power now!!!
ghbbb123 4 years ago
lol....actually you're right. I am the second owner and bought it from an 85 year-old woman back in '97. It was a 305 4 bbl with a 2.28 rear. I ran it when I first bought it and it went 17.0. lol...
nitrous383 4 years ago
Haha yeah the 305 was never really known for its performance - but you fixed that problem on your 'Bu! Those 305 engines are super reliable though my uncle had one in his old '84 bonneville and it lasted almost 300,000 miles. I guess when you only have 150 horsepower theres really not a whole lot to go wrong lol
ghbbb123 4 years ago
Sick.
asselin14 4 years ago
Nice sounding idle.
Malibu's have no equal....
ohhhh yeah chevy!!!
INFAMOUSMALIBU 4 years ago
bro has a 80 bu witha 305, niiice ride man
halosux4life 4 years ago
that is a sweet ride!!!
mnregal 4 years ago
thanks man...
nitrous383 4 years ago
nice, i have a 78 455 bigblock, sssooooo custom, very fast, very LOUD. side dual 4" pipes, ive got pumps hooked to a toggle under seat that folds down plates, 2 battery for stereo (both hooked to alternator on toggle) 79 rear end, re done interior, lots of plexy glass and neons. only thing, its a 4dr, but it a corvette killer! check it out.
devinkees 5 years ago
Nothing wrong with a 4 door malibu and I have a 502 in it lol
macmuney 5 years ago
The kid in the video taking out the trash is now a NYS Trooper. He always chats with me when I work on the car. Good thing I was nice to him! :-)
nitrous383 5 years ago
how much hp does it have
cookieboy87 5 years ago
not enough.. ;-)
nitrous383 5 years ago
ya i have 2 and a half inch flowies in my 79
jamie5003 5 years ago
Hey nitro.. great car man... this is MalibuMan1979.. (my malibu reving). Mine is a mild 350 w/350 trans. I am planning a 383 build this winter.. we will see. love your pipes, (flowmasters?). any way ,'G cars rock'...
MalibuMan1979 5 years ago
Thanks man. Lots of hard work there. Yeah they are two-chamber 3" flows. 383's are a great combo for little money.
nitrous383 5 years ago
I love that Malibu. I had 2 '79's like it. If I ever redo a car that will be what I want to do.
Nice work. :)
Wireedge 5 years ago
Thanks man....
nitrous383 5 years ago
nice. mine's an 80 landau classic with a 4 barrel 305. the muffler fell off a few weeks back, sounds pretty sweet without it haha might just leave it like that and put a pipe out the back.
kanuckvw 5 years ago
thanks! Mine was a 305 4 barrel. Ran 17.0's with 2.29 gears! lol....
nitrous383 5 years ago
nice car my dad has the 79 malibu landau classic its pretty sweet but only rockin a 305 but she gotta four barrel carb so it sounds pretty good
jtheghost 5 years ago
thanks. GBodies rock! Good luck with your Bu!
nitrous383 5 years ago