Picking and bypassing a simple safe

[Pieh0]

I was going to break out the thermite, but i suppose i could try this first :P

[INaneek]

does safes contain lead?

[stevenr1986]

WELL THAT WAS A WASTE OF £60 ON A NEW "SAFE"

[melanie1254]

pfff that's a 40 dollar safe... Try cracking my 800$ honeywell ;)

[atellada]

if its loose you just throw it on the bed with left side facing up,

[AndrewLaRus]

XDD

[dersan2]

lol there is a faster way just hit it above the black spinning button above few times andi will jump open

[JoaoAzulSempre]

@dersan2 Yes, but you can make it difficult by stretching the spring, or replacing it... I only stretch it a bit and I'm no longer able to open after hit it above.

[JoaoAzulSempre]

That works! I've tested on my safe box! Also this "Security Expert Breaks into the AMSEC ES1014 Lock in Under One Minute " video, may also work!

What I did to secure my vault was: remove the internal cover, remove the red button from being accessible from inside the vault, and remove the metal plate of the internal lock, that would allow the knob to open. Put the cover again. And that's it! Finally a little more secure! Still possible to attack, but a little harder!

[victorvtwl]

thank you man i dint know that u just need to turn it halfway then it can be open, i thaught it is like the normal drawer locks so i turn the lock to its 90 degree angle but still cant open but ever since i saw your video i got $2000 from my parents i guess i owe you big time man !!!!!!!!!! thank you ill promote your video dude!

[victorvtwl]

@victorvtwl now when i try to open it again i can close it fuck

[MrWilDemon]

C4 also open it, but dont use too many or you will blow up the safe XD

[jeroneymo]

Splinter cell lock pickin



[sangokudbz79]

@jeroneymo oblivion also xD

[CorpTravelSafety]

Great video - if someone wants to add an extra layer of security to an in-room hotel safe, travelers can buy a special lock that allows a traveler to place their own lock on the outside of a hotel safe. This prevents an unauthorized person from accessing your hotel safe when you are away.

You can see a video of this lock, called a Milockie, by searching the name here on YouTube. Additional information can be found at on the website called Corporate Travel Safety.

Hope it helps someone!

[TheSoldierCore]

i know a school whos have thats kind of safe

[justyesful]

i have the Exact safe with the Same Pin LOL!

[thisisacrummyname]

The reset button can't be reached if the safe is bolted down like it is supposed to be.. :) the hole you went through is one of the holes that is intended for bolting the safe down.

[nenabeijaflor]

kkkkkkkkkkkkkkkkkkkkkkkkkkkkkk­kkkkkkkkkkkkkk

[sadieblooming]

You can't push the red button if you wrap chewd bubble gum around it.

[RoskildeFilms]

where did u buy it??

[TheDarkBlob]

um....vafan...

[MrMMABoy]

i used to do this to my parents lock with no problem lol, but now it wont turn ? any advice haha

[Rogier21]

fuuuu that's the "safe" I bought just (oh well it was only 25 euro)

[Greatshow09]

@Rogier21 Is that the honeywell steel security safe

[amberay7]

Reset button would not work on mine, but slight bouncing opens it very easily.

[123ezm]

Second method not true, you entered the default digital combo :(

[238949]

Thank you that got we out of trouble

[dmscoon]

I have one of these

[konomon1]

Wow rather your really good at Raking the pins or those pins suck... a couple rakes and you hit all of them.

[hahafuto]

what tools do i need 2 do this

?

[snowybaz]

thanks so much for the demo. ive got one of these safes for holding an important item. guess ill be storing it somewhere else now.

[rafael44p]

i got that safe my school gave it to me when they lost the key :) i opened it the way you did. its just to easy not with the reset butom

[rafael44p]

i got that safe my school gave it to me when they lost the key :) i opened it the way you did. its just to easy

[sandemus8]

I have those same tools

[stfu965]

all of that work and nothing in there

LOL

[Sm0keDamage]

lol those safes are sooo unbelievably cheap, i got one just like it and i can use ANY small double sided key to open it. i first figured it out when i used my tool box key by mistake. it was a little 'sticky' turning the key but it opened just the same.... same with my mail box key. and ummm yea everyone i know that owns a safe bolts it down. wtf is the point of having a safe if someone can just carry it off?

[igbhd]

all safes like this have a plastic screw cap over the pin change button i know i have one

[tarheelsown2]

HAHAHA Now I know your Combonation

[CaptChrisT]

lol!!! Why would they ever put a wafer lock on a safe!?

[hitlersucks101]

what is that safe called?

[Hstakken]

Had one of these.

had a burglary and he just smashed the front (black box) off and then you can open it by sticking your finger in and turn :(

[natty058]

worked wonders for me.. i lost the keys and this video helped me access my safe! :)

[smokycarlyon]

most of these safes can be pick with hair pins lol there sooo crap

[zbvvc]

does it work with a PIck gun?

[excalubur2k]

wont work with a pick gun as its a wafer lock

[piketyl000]

i have a cheap safe kind of like that but its all black

[HifiCentret]

Wtf. Seems like there's gone inflation in these safe's. Have a virtually identical one called Rockfort. It got a nice tubular emergency key (forgot code or out of battery) which is much harder to pick. The mounting hole only an issue if wall mounted above the ground. Put in a bolt secured by two nuts inside. The first barely tightened against the bottom but the two tightened together. That way you can't unscrew the bolt. Or if filled with stuff a plate is also effective (unmount door to put in).

[HifiCentret]

@HifiCentret Or cut a thread in the bottom holes and file a bolt so it fits flush when mounted from the inside. Possibilities are endless. And remember: It's not necessary to use extremely hard stuff. The plate it's made of is drillable without too much trouble. So drill to get to the button or lock mechanism.

[s3mm3tj3]

It opens when you stare at it

[CALABRODIE]

Thanx man its a bit tricky making the torsion bar and hook the right size , got any tips on househol stuff I can use that best suits it ?

[tarren117]

i lost the key to my safe and i did this

[SebastianB18]

did he died?

[gnagge91]

When i see this, it look so easy 2 take of the lid, but im going crazy when i try 2 open! I can´t get it off

[Echofromsomewere1]

first technique .... what dora sayd

second technique .... doest work beacouse most owners will either bolt the safe or weld that hole.

[EddieDaOnly1]

@Echofromsomewere1 dont madder what they weld i open it with a potato!!

[jon4594]

@Echofromsomewere1 You really think that majority of safe owners bolt down and/or weld their safes? Most consumers now adays buy the safe, slap it on the ground in their closet, and call it a day.

[ThailanderAndy]

@jon4594

I guess you must've gone around doing a questionairre survey to safe-purchasing consumers? ... NO

You can only speak for yourself not for "most consumers" or the "majority".

Just because you may wear the same underwear for 7 days and nights don't make statements that "most people" or the "majority" do the same as you.

[dora12345678910]

So you change the lock to a better lock,tubular kind for $20 put bolts in the holes or just disconnect the rest button on the inside...it's great to see the problems there is with the safes but just with a few changes you can fix the problems,but a safe isn't made to keep everyone out just keep them out long enough to detour them,if they want your money and with enough time anything can be done

[420apbt4life]

i did that to its so ezzy ima get a new safe ahhah

[trickytree2]

y would they put a wafer lock on a safe lol

[bricardiff1969]

sweet

[taylorrossa]

I had a safe just like this in my locker at work but had lost the number. I was using it with the key only. WOW saw this on YOUTUBE and tryed it. Worked like a charm!!!! I have full easy use of my safe now. Thanks very much!

[shubbstar]

Safe bouncing is better, just hold keep the leaver turned while bouncing the safe on a hard surface, works a treat

[bruno2260]

@shubbstar I'd like to see that. Post a vid.

[shubbstar]

@bruno2260, Just search Safe bouncing or /watch?v=hhWQF14Jb9M

[syncmaster710n14]

@MrAirgunlover it worked!!!

It tuck about an hour but I got it.

[syncmaster710n14]

Good advice but it did not work.

[syncmaster710n14]

Cool video but the problem I have is that my safe has a set code that can not be changed.

[wrestlingkid10]

now when he opened the door there would be a bomb on it and he would say

"OH MY FUCK GOD"

KABOOMMMMMMMMMMMMMMMMMMMM

[buhadog]

thanks YOu helped me :)

[Lokiwho]

all that trouble and no money!

[BananMormor]

Thanks! glad you enjoyed it

[superwoodsy123]

theres an esier way to brake in to that safe if u cannot reach any of the bolt holes just bang the safe hard enough and it resets the code to the manufacture code and this is 159A email me @ woodsyboy@hotmail.co.uk to let me know if it works on yours

[BeccaNTy1]

@BananMormor dude, i have the same safe (bunker hill from harbor freight) n i've tried everythin you've shown, even the f****** potato n i can't get it open. what am i doin wrong??? can u plse help??? i really need to get in my safe, asap!

[theratssbb]

@BananMormor are you swedish?

[vipulvekhande]

@BananMormor it is so easy and safe

[mentoOsmann]

awesome video