May I suggest that the Tesla coil should be used as your antenna with the spark gap circuit used in reverse? I would try it first without the jewel thief as odds are that it would blow out. Some how it just feels right this way. I don't know a lot about electricity but it just hits me that way. It seems worth a little thought. Thanks for being there and working on this.
Put a air variable capacitor in parallel with your coil and you can tune it to the frequency that you are picking up. The coil will resonate and the power will increase dramatically. You may not have to place rods in your coil to change the inductance. Just my 2 cents.
@harmsworth1 Hmm, in parallel with the coil,,ok, ill try, thanks. i just got 2 variable capcitance/decade boxes :-) Thanks for the 2 cents, hehehe,,,that was woth at least a dollar, hehehehe
If you had put the money you invested in your circuit into a little solar panel you would have stamped on your circuit's power output. This is why solar panels are in use although they suck compared to radio power receivers which super suck. If you just wanted to do a Tesla free power experiment then try his night time solar panel thingy. That's something I always wanted to try before I became formally educated in electronics and realized it wouldn't amount to much and would be a lightning risk.
@MYBLOODYUSERNAMEFFS The Tesla night time solar panel that I was referring to was not awarded a patent because the mechanism relied on a voltage potential that increases with the physical distance above ground and 'theoretically' EM radiation from space. This was not well understood in Teslas day and "solar panel that works at night" sounded foolish so no patent. Since using one of these 'solar panels' would be an experiment it would fall within the realm of science.
I having ascertained that the amount of energy conveyed to it per unit of time is under otherwise identical conditions proportionate to the area exposed, or nearly so.
--ESLA PATENT 685,957 APPARATUS FOR THE UTILIZATION OF RADIANT ENERGY--
hey if you want to test different devices google such practical guide to free energy its a 2000 page documet that describes and tells you how to build hundreds of free energy devices and the book is free for who ever wants it
@MasonR13 Yes, i know of this site,,,first time i saw it,,it brought a tear to my eye, hehehe, beautifull site,,,thank god for the internet !! Thanks for reminding me, because i forget about it sometimes :-)
@paius2003 Hmmm, someone else just suggested the same thing,,hmmm, i will study the kapandze devise more. I will have to include drawings in the next video...... bottom of page here paulslab dot blogspot dot com
Thanks fo the luck, i will be needing it. starting new experiments with this circuit today :-)
Paul, Tesla noticed that it was the turning on and off that made that eather Voltage. He found this out while working for Edison. Have you tried a M.O.T. or a PWM after your antenna but before your circuit? Also what about the HAARP antenna like a old clothes line that spins (Umbrella type?) I think they use X design. Also tesla says to use a polished surface sheet insulated from ground. I truly think u need to pulse your input. 555 timer maybe? hook it up to a car battery and run 12v stuff
I looked at the specifications for your protek 506 volt meter.
I notice it has a frequency counter.
I only had time to watch videos 20 through 24 to see if you used it on that antenna circuit.
Did you ? It would be nice to know the frequency of what you are measuring.
Also an oscilloscope would give you more information as the waveform and voltage changes as you change parts. I bought a Rigold oscilloscope for less than $400 recently. It is excellent.
@definitionofis part 7, watch?v=XN_p1O7ESF8 , 258 KHz. recieved from antenna.
I recently got a cheap, e-bay, used, Heath Kit scope,,$50, but im still new at using it and need some help with connecting it up. 1 wrong connection and there goes the scope. Also bought frequency generator at same time.
I would now like to get the circuit resonating with the incoming frequency. Or get everything resonating with Schumann frequency.
@INVENTOR3 How about attaching a crystal radio earphone instead of the calculator to see if you hear anything ? (not a low impedance regular earphone) I bought one on eBay for my nephew.
Another idea would be to attach a audio amplifier to it (after the diode).
@definitionofis Oh, good idea,,i have tried a very low impedance earphone piece from china,,no luck,,,but i have not tried a crystal radio earphone. Thanks.
@sdvpost Thanks,,,i know this patent inside & out, and i have talked with boxa888 many times,,,good guy.
I believe i already improved Tesla's design by getting 125V,,,,his devise may get you 12V,,not sure what his power output was though. Thanks again for the link.
@disinfodestroyer I would like to incorporate some quartz somehow,,,but not sure how yet. I woul;d like to do a lot of experiments with quartz yet. Its amazing how pressure on a crystal can produce a voltage! Thanks for the idea,,,,no such thing as a dumb questions in my book :-)
Enjoyed watching the videos, you are further along in practice than I am. Some things I want to shoot at ya, hopefully it inspires something. Have not read all the comments so if I repeat something, please forgive me.
First, Coil wire diameter should affect your Voltage / Amp ratio.
Second, Antenna tune, your length should match the sweet spot of your voltage frequency. Maybe try 440 Hz.
Thrid, Ground, Once you have enough, more doesn't help.
Yes, strange that it works best with lowest forward bias voltage diodes,,results are not as good with silicon diodes. It is still a mystery to me,,,hmmm, needs to trickle in little by little,,,,maybe a differant length antenna or diferant caps would change this, but im not sure.
...Then see if you can get enough charge to jump a spark gap, if you can then you have the makings of a resonant circuit happening. Discharge it through a transformer and hey presto! See how quickly the universe will supply the power necessary to recharge/discharge your cap ;-)
@MattBlytheTheOne Hmmm, yes. I remeber i had a sprk gap set up at one time, but i dont remember what size cap i was using, i got a spark about every 10 seconds and it was like 1/8 of an inch long. I will try this , thanks
Try tuning the aerial, Tesla's car aerial was only five feet tall but he was using vacuum tubes to step up the voltage. Electrons have a huge charge (potential difference) when leaving a vacuum. Also try adding a large capacitor in the circuit on the receiving end and see how well it charges.... 40volts is way more effective than a solar panel already :)
@MattBlytheTheOne 125V! :-) I think Dr Morey built the same devise. I would really like to make my own vacuume tubes somehow. Oh, i did not know that the vacuume tubes stepped up the voltage, good to know, thanks. I will try charging a large cap,,i been meaning to do this.
Did you know a resistor is just a coil of wire? How thick the wire is and how many turns determines it's resitance and current rating. Resistance is really just another way of measuring voltage drop or the potential diff. across a conductor/resistor. With your circuit you have a voltage potential diff. between ground and the aerial which you are able to measure using a resistor/coil. Different techniques will give you better results but that is the essence of it.
I have been toying with sets of diode's instead of just 1 (2 per circuit in your case) I would be interested to see that you get if you put, say 5 diode's in parallel where you have each 1 diode. maybe try series too. My similar experiments show increased voltages and power output. not sure exactly why, would really like to see confrimation
Also would like to share a good place to get electronic components online cheaper that the shack... American Microsemiconductor inc
@klam3r0n Interesting, someone else mentioned trying the series or parallel of diodes. Hmmm, im thinking it will cause more voltage drop. This project will have to wait now untill winter is over(aprox 3 months). I will be back at it soon, and trying new things. Also top section of my pole broke, i will fix when winter is over now.
Have you ever tryed just wrapping electrical tape around a copper pipe and then the wire to see if that works it seem to me the closer you get the copper to the wire the better it works
Question: Does the human body act as an inductor? I noticed that when I touched the wire before it began to coil, voltage dropped, as I had expected it to. Then when I touched the coil, voltage also dropped. However, when I touched the wire after it had exited the coil, voltage doubled!. Of course we are only talking about a volt and a half, but the result is what I find interesting. Your thoughts?
@nebula7693 Good question! Our bodies can act as a capacitor, and "I" believe our bodies can act as an inductor also because we have nerve endings that are producing electrical pulses,,,,so in that case "I" believe we do emit an EMF or our Aura. So i am not really sure, i think science is still working on that answer. There is also a family out there that is magnetized, search "magnetized man". Interesting results you had, maybe cause by body's capacitance.
I am encouraged by your results. So far, from my experimentation, I have not been able to exceed 3.5V. I first started with 14g copper household wire. Got some interesting results (see my blog to see the two experiments I have so far posted). I have also only wound one coil. Got some interesting results from that, too. But still have not exceeded 3.5V. Hopefully, additional coil will help. Also, I get better results when coil is between circuit and antenna. Any ideas why so for me?
@INVENTOR3 sorry, I guess I should have posted that. if you go to energyexperiments. blogspot. com/ you can see my start. Would be very interested in your comments/advise.
@nebula7693 I see your blog! Beautiful! Wow, im flattered! Good set up.
OK..first, i never saw the ground wire. Fun to watch someone else doing the same experiments i did, heheheh, now you know how i felt. I did not get good results from adding 2 antennas either, or with coaxial cables, or even with 2 antennas and 2 circuits coming together, strange. Keep the antenna tight as possible, dont let it touch anything, as your finding out. I also did not get good results from coil on top.
@INVENTOR3 Please, you must try coil at bottom with ground wire running through the middle of it, watch videos carfully to see how i have it wired with the coil,,this is where i get a huge diffferance!! With antanna wire that runs from board to board,,,on second board where antenna bends over, try placing a copper elbow piece there with antenna running through it, current ridding on surface of antenna wire, when it hits the corner it wants to fly off into space, so with copper elbow maybe ..
@INVENTOR3 con't........current will run from outside of wire to inside wall of elbow, and then back to outside of antenna wire down to circuit. Maybe this will help, or maybe it is better without the bending over second board. I have noticed that the antenna wire does not like to be bent around corners too much either. You will at least triple your readings when you put coil at ground end with ground running through it :-) Great videos and blog site! you are sooo close to having great results!
also make your barrie a large copper plate ie 10 x 10 inch in the ground and attach / solder to the pipe this may increase your current, pls post picture of your circuit with
@eloid777 check out my videos....free energy circuit-how to part 1 to 3, lots of info there. 10 x 10 plate,,,i was thinking about this when i first made my ground,,i was concidering a 4 foot square copper plate horizontaly in the ground,,but a lot of digging and expensive plate,,,maybe i will try at a later time. First i think i need to get my circuit resonating.
Hi Paul, i just finished watching some video's about this inventor Kapanadze. His set-up has been replicated by Jean-Louis Naudin (google his name to find the website). The coil construction in the Kapanadze set-up is quite interesting. I wander what you think about it?
@mistaxdeman Funny, i am a member of the JLN Labs,,,hahaha, now i know what JLN stands for. I looked at video with the coil, interesting, wraped clockwise then counter clockwise then clockwise again with larger wire,,,almost acting as a transformer like a tesla coil does. he should try to tapping into differant spots on his larger windings, maybe to hit a point of resonance. very interesting video, thanks.
Paul, please watch the video's by Stan Deyo on anti gravity (8 parts) and about The Montauk and Rainbow project(10 parts). They could help you to build a better receiver. Thicker insulated wire (insulated for 30.000 Volts) in hexagon format hanging in the air.
I made a replica. I have the circuit using my metal roof as the antenna and a large stainless grounding rod. I am getting about 5V DC and 0.00 milliamps. Any ideas?
@berilium16 i would love to see some photos. without seeing your set-up, i would suggest now adding the coils. (1) 16" long coil, .034 wire around 2.375 dia PVC pipe. if you come this far...adding the coil will greatly increas things now. Build the coil and i can help you connect it into the circuit, if it is unclear from the videos.
Great job so far! a lot of people have a hard time just getting 5 or 6 volts,, but you have :-)
@berilium16 well, i tried to mount the screen at the top of pole, but was to heavy for pole, pole bends like fishing rod. I guess i could try the screen at ground level...
I did try copper plate, but not as good as antenna, but both together was a little better, but again i have not been able to mouint the copper plate to the top of this particular set up....I will try this. Thanks for comments.
@swerlyjoe Very good reading, i must print this out, thanks!
About OU....im starting to think it is impossible to get more out then put in.....but if the x-tra energy is coming from unexsplained/unidentified source, then to lable OU.
I am convinced that there is a sea of matter and energy all around us, not just man made. Thanks for the link, i will definately print and finish reading.
put 4000 winds in a circle wound around a 5 gal bucket and stick that on a pole in the air , You will get voltage you wont believe , it picks up stray rf . then get an antenna tuner and put it in line with it so you can tune it to more and less .
I have been doing a lot of experiments, and have found that using a very deep ground rod , and multiple ground rods is the key to producing a lot of amperage. Get the 8 foot long ground rods from Lowes. they are not that hard to drive in all the way in with a go devil hammer. It will make alot of difference.
So let me get this straight. you said one makes about 60 micro amps, that is (60 * 10^-3) = 0.06 Amps. So if you hook up 25 of these you would have 1.5 amps, or enough to slowly charge a car battery?
Do you use the same antenna when you have two connected?
@ibpointless2 well, i have tried to connect multiple circuits together in series and in parallel, but did not increse current. I dont understand myself.
I do use only 1 antenna for 2 circuits. I have diagram here... paulslab. blogspot. com
@INVENTOR3 This circuit doesnt seem right? Im thinking I could make it better, because the circuit seems to be wasting electricity or not using it at its best ability. But I wont know until I experiment with it.
Great job on the project it has really inspire me.
Maybe have a coil from the antenna to the cap positive, and a coil from the ground to cap negative. Maybe try a generic vacuum tube instead of the spark gap! The switch from the gap or tube should occur similar to the one in the Tesla coil between the high voltage drive and the positive side of the primary coil. Think Tesla coil backwards.
have you tried making a laden jar style capacitor out of a home depot large plastic paint can? look on instructables for the laden jar of death. These capacitors are better for gathering high frequency waves. Try a spark gap that is connected to a step down transformer to increase current. You may need multiple step down transformers in a chain where the secondary becomes the primary of the next in the chain. Make sure to put a non polarized cap between primary and secondary in parallel.
could you energize the antenna in order to improve the receiving capacity. This also works with a very small tv antenna. By energizing it the antenna grows in size exponentially. I used to have a small energized tv loop antenna. Very powerful !
Very good question. Yes, maybe, something i have read about many times. Makes a small antenna act like a large one. It would probly be a complex circuit that maybe above my expertise of understanding how to build. but then again will there be enough power to run all the components, or will you have to add a power source to only the antenna first. I think if we got the proper circuit and ran in resonance frequency,,,it would not matter how big the antenna is.
Hey Great !!! I've been out of the loop for a while: ( Have you ever tryed to hook a joule thief up to your circuit? Let me know if you get the time.And thanks again for sharing. Brmdunn
This is what i was thinking about using on my tesla coils to help in tuning those....but those will be worked on soon. Weather is turning on me fast. Temp is only in the 50ties now. Last 2 weekends i got rained on 3 times(drenched), but i managed to get a second circuit and antenna wire put up in the rain, but was not able to test yet!!!
Have you ever tried a tuneable inductor.I think you can do it with a ferrite rod in the center and just move the rod to change resonance.Just a thought
I think your on the right track to free energy. please check out info from mr. nathan stubblefield and earth magnetic currents and earth batterys. his work might give you more ideas.
Believe me, I know how frustrating this can be, just keep in mind how this system works and you'll be fine. It is tunable and must be tuned, just like a radio. But you already have quite enough to charge batteries for free for ever. So while experimenting, you can still use the power if your willing to store it. The rate at which you can charge is a true test of power utilizing a true load. A dead battery is quite a load. Give it a try sometime...
May I suggest that the Tesla coil should be used as your antenna with the spark gap circuit used in reverse? I would try it first without the jewel thief as odds are that it would blow out. Some how it just feels right this way. I don't know a lot about electricity but it just hits me that way. It seems worth a little thought. Thanks for being there and working on this.
angierman 1 month ago in playlist More videos from INVENTOR3
@angierman hmmm, interesting,,,sounds like "Tesla's little secret" video,,, watch?v=o7NdxnjetSw
I always go with my gutt feelings,,,thanks :-)
INVENTOR3 1 month ago
Put a air variable capacitor in parallel with your coil and you can tune it to the frequency that you are picking up. The coil will resonate and the power will increase dramatically. You may not have to place rods in your coil to change the inductance. Just my 2 cents.
harmsworth1 1 month ago
@harmsworth1 Hmm, in parallel with the coil,,ok, ill try, thanks. i just got 2 variable capcitance/decade boxes :-) Thanks for the 2 cents, hehehe,,,that was woth at least a dollar, hehehehe
INVENTOR3 4 weeks ago
@INVENTOR3 Your welcome, let me know how it works out.
Tom
harmsworth1 4 weeks ago
Comment removed
MYBLOODYUSERNAMEFFS 1 month ago
you sure your not just amplifying a tv signal coming from the pole?
MYBLOODYUSERNAMEFFS 1 month ago
@MYBLOODYUSERNAMEFFS I will have to try this out in the middle of nowear. I believe im recieving a collection of many frequencies.
INVENTOR3 1 month ago
If you had put the money you invested in your circuit into a little solar panel you would have stamped on your circuit's power output. This is why solar panels are in use although they suck compared to radio power receivers which super suck. If you just wanted to do a Tesla free power experiment then try his night time solar panel thingy. That's something I always wanted to try before I became formally educated in electronics and realized it wouldn't amount to much and would be a lightning risk.
buckstarchaser 3 months ago
@buckstarchaser using a solar panel is not science
MYBLOODYUSERNAMEFFS 1 month ago
@MYBLOODYUSERNAMEFFS The Tesla night time solar panel that I was referring to was not awarded a patent because the mechanism relied on a voltage potential that increases with the physical distance above ground and 'theoretically' EM radiation from space. This was not well understood in Teslas day and "solar panel that works at night" sounded foolish so no patent. Since using one of these 'solar panels' would be an experiment it would fall within the realm of science.
buckstarchaser 1 month ago
nice videos i like it my website is computerittech . c o m
yousaftareen818 5 months ago
Tesla say:
I having ascertained that the amount of energy conveyed to it per unit of time is under otherwise identical conditions proportionate to the area exposed, or nearly so.
--ESLA PATENT 685,957 APPARATUS FOR THE UTILIZATION OF RADIANT ENERGY--
warloveqoo 6 months ago in playlist 更多由INVENTOR3提供的影片
1~8
watch?v=1-yAkIF8LE8
warloveqoo 6 months ago
Thanks Paul~~
warloveqoo 6 months ago
@warloveqoo Your welcome. Thank "you" :-)
INVENTOR3 6 months ago
if you are or were haveing trouble findig those .2 uf ceramic disk capacitors they have them on cascade electronics for 15 cents a piece
MasonR13 7 months ago
hey if you want to test different devices google such practical guide to free energy its a 2000 page documet that describes and tells you how to build hundreds of free energy devices and the book is free for who ever wants it
MasonR13 7 months ago
@MasonR13 Yes, i know of this site,,,first time i saw it,,it brought a tear to my eye, hehehe, beautifull site,,,thank god for the internet !! Thanks for reminding me, because i forget about it sometimes :-)
INVENTOR3 7 months ago
@paius2003 Hmmm, someone else just suggested the same thing,,hmmm, i will study the kapandze devise more. I will have to include drawings in the next video...... bottom of page here paulslab dot blogspot dot com
Thanks fo the luck, i will be needing it. starting new experiments with this circuit today :-)
INVENTOR3 8 months ago
Paul, Tesla noticed that it was the turning on and off that made that eather Voltage. He found this out while working for Edison. Have you tried a M.O.T. or a PWM after your antenna but before your circuit? Also what about the HAARP antenna like a old clothes line that spins (Umbrella type?) I think they use X design. Also tesla says to use a polished surface sheet insulated from ground. I truly think u need to pulse your input. 555 timer maybe? hook it up to a car battery and run 12v stuff
jimdennett 9 months ago
I looked at the specifications for your protek 506 volt meter.
I notice it has a frequency counter.
I only had time to watch videos 20 through 24 to see if you used it on that antenna circuit.
Did you ? It would be nice to know the frequency of what you are measuring.
Also an oscilloscope would give you more information as the waveform and voltage changes as you change parts. I bought a Rigold oscilloscope for less than $400 recently. It is excellent.
definitionofis 10 months ago
@definitionofis part 7, watch?v=XN_p1O7ESF8 , 258 KHz. recieved from antenna.
I recently got a cheap, e-bay, used, Heath Kit scope,,$50, but im still new at using it and need some help with connecting it up. 1 wrong connection and there goes the scope. Also bought frequency generator at same time.
I would now like to get the circuit resonating with the incoming frequency. Or get everything resonating with Schumann frequency.
INVENTOR3 10 months ago
@INVENTOR3 How about attaching a crystal radio earphone instead of the calculator to see if you hear anything ? (not a low impedance regular earphone) I bought one on eBay for my nephew.
Another idea would be to attach a audio amplifier to it (after the diode).
definitionofis 10 months ago
@definitionofis Oh, good idea,,i have tried a very low impedance earphone piece from china,,no luck,,,but i have not tried a crystal radio earphone. Thanks.
INVENTOR3 10 months ago
youtube.com/watch?v=1-yAkIF8LE8
Tesla patent will be halpfull!
sdvpost 1 year ago
@sdvpost Thanks,,,i know this patent inside & out, and i have talked with boxa888 many times,,,good guy.
I believe i already improved Tesla's design by getting 125V,,,,his devise may get you 12V,,not sure what his power output was though. Thanks again for the link.
INVENTOR3 1 year ago
have you tried using something like quartz for a piezoelectric effect...I'm still learning sorry if this a dumb question.
disinfodestroyer 1 year ago
@disinfodestroyer I would like to incorporate some quartz somehow,,,but not sure how yet. I woul;d like to do a lot of experiments with quartz yet. Its amazing how pressure on a crystal can produce a voltage! Thanks for the idea,,,,no such thing as a dumb questions in my book :-)
INVENTOR3 1 year ago
have you try two circuits in parallel with a bridge.,i wander if current will increase
rammgarr 1 year ago
@rammgarr It was no good for me trying in parallel. but 2 circuits in series gave me more current but less voltage.
INVENTOR3 1 year ago
Enjoyed watching the videos, you are further along in practice than I am. Some things I want to shoot at ya, hopefully it inspires something. Have not read all the comments so if I repeat something, please forgive me.
First, Coil wire diameter should affect your Voltage / Amp ratio.
Second, Antenna tune, your length should match the sweet spot of your voltage frequency. Maybe try 440 Hz.
Thrid, Ground, Once you have enough, more doesn't help.
Out of characters remaining keep up the good wrk
AdrianBino 1 year ago
@AdrianBino Coil wire dia, interesting, i will experiment with it.
I will try to make the coil & caps resonate with the antenna.
Ground, i agree, i found this out the hard way, once you have enough ground, it is enough, no more needed.
Thanks for the comments
INVENTOR3 1 year ago
Comment removed
AdrianBino 1 year ago
Great videos really interesting keep up the good work but I have one question...why germanium diodes?
hardway760 1 year ago
@hardway760 Thank you very much!
Yes, strange that it works best with lowest forward bias voltage diodes,,results are not as good with silicon diodes. It is still a mystery to me,,,hmmm, needs to trickle in little by little,,,,maybe a differant length antenna or diferant caps would change this, but im not sure.
INVENTOR3 1 year ago
...Then see if you can get enough charge to jump a spark gap, if you can then you have the makings of a resonant circuit happening. Discharge it through a transformer and hey presto! See how quickly the universe will supply the power necessary to recharge/discharge your cap ;-)
MattBlytheTheOne 1 year ago
@MattBlytheTheOne Hmmm, yes. I remeber i had a sprk gap set up at one time, but i dont remember what size cap i was using, i got a spark about every 10 seconds and it was like 1/8 of an inch long. I will try this , thanks
INVENTOR3 1 year ago
Try tuning the aerial, Tesla's car aerial was only five feet tall but he was using vacuum tubes to step up the voltage. Electrons have a huge charge (potential difference) when leaving a vacuum. Also try adding a large capacitor in the circuit on the receiving end and see how well it charges.... 40volts is way more effective than a solar panel already :)
MattBlytheTheOne 1 year ago
@MattBlytheTheOne 125V! :-) I think Dr Morey built the same devise. I would really like to make my own vacuume tubes somehow. Oh, i did not know that the vacuume tubes stepped up the voltage, good to know, thanks. I will try charging a large cap,,i been meaning to do this.
INVENTOR3 1 year ago
Did you know a resistor is just a coil of wire? How thick the wire is and how many turns determines it's resitance and current rating. Resistance is really just another way of measuring voltage drop or the potential diff. across a conductor/resistor. With your circuit you have a voltage potential diff. between ground and the aerial which you are able to measure using a resistor/coil. Different techniques will give you better results but that is the essence of it.
MattBlytheTheOne 1 year ago
@MattBlytheTheOne I forgot that a resistor is a coil, but i dont think they all are? I see, Thanks for the info.
INVENTOR3 1 year ago
I have been toying with sets of diode's instead of just 1 (2 per circuit in your case) I would be interested to see that you get if you put, say 5 diode's in parallel where you have each 1 diode. maybe try series too. My similar experiments show increased voltages and power output. not sure exactly why, would really like to see confrimation
Also would like to share a good place to get electronic components online cheaper that the shack... American Microsemiconductor inc
Good work! keep it up!
klam3r0n 1 year ago
@klam3r0n Interesting, someone else mentioned trying the series or parallel of diodes. Hmmm, im thinking it will cause more voltage drop. This project will have to wait now untill winter is over(aprox 3 months). I will be back at it soon, and trying new things. Also top section of my pole broke, i will fix when winter is over now.
Thanks!
INVENTOR3 1 year ago
ok Paul, you need to get an oscilloscope and find the frequency also. Make an LRC circuit with your power and light up a florescent light bulb dude.
waterforfuel 1 year ago
Have you ever tryed just wrapping electrical tape around a copper pipe and then the wire to see if that works it seem to me the closer you get the copper to the wire the better it works
MrTravis769 1 year ago
@MrTravis769 Hmm, i have not tried that. Hmmm to give it an insulated barrier, "then" to see the differance.
Thanks for the ideas.
INVENTOR3 1 year ago
Question: Does the human body act as an inductor? I noticed that when I touched the wire before it began to coil, voltage dropped, as I had expected it to. Then when I touched the coil, voltage also dropped. However, when I touched the wire after it had exited the coil, voltage doubled!. Of course we are only talking about a volt and a half, but the result is what I find interesting. Your thoughts?
nebula7693 1 year ago
@nebula7693 Good question! Our bodies can act as a capacitor, and "I" believe our bodies can act as an inductor also because we have nerve endings that are producing electrical pulses,,,,so in that case "I" believe we do emit an EMF or our Aura. So i am not really sure, i think science is still working on that answer. There is also a family out there that is magnetized, search "magnetized man". Interesting results you had, maybe cause by body's capacitance.
INVENTOR3 1 year ago
I am encouraged by your results. So far, from my experimentation, I have not been able to exceed 3.5V. I first started with 14g copper household wire. Got some interesting results (see my blog to see the two experiments I have so far posted). I have also only wound one coil. Got some interesting results from that, too. But still have not exceeded 3.5V. Hopefully, additional coil will help. Also, I get better results when coil is between circuit and antenna. Any ideas why so for me?
nebula7693 1 year ago
@nebula7693 i need link to your blog. I will check your channell for it.
keep coil at end,,,,,,but now make sure to run ground through the center of the coil,,,,you will get big differance :-)
INVENTOR3 1 year ago
This has been flagged as spam show
@INVENTOR3 sorry, I guess I should have posted that. if you go to energyexperiments. blogspot. com/ you can see my start. Would be very interested in your comments/advise.
nebula7693 1 year ago
@nebula7693 I see your blog! Beautiful! Wow, im flattered! Good set up.
OK..first, i never saw the ground wire. Fun to watch someone else doing the same experiments i did, heheheh, now you know how i felt. I did not get good results from adding 2 antennas either, or with coaxial cables, or even with 2 antennas and 2 circuits coming together, strange. Keep the antenna tight as possible, dont let it touch anything, as your finding out. I also did not get good results from coil on top.
INVENTOR3 1 year ago
@INVENTOR3 Please, you must try coil at bottom with ground wire running through the middle of it, watch videos carfully to see how i have it wired with the coil,,this is where i get a huge diffferance!! With antanna wire that runs from board to board,,,on second board where antenna bends over, try placing a copper elbow piece there with antenna running through it, current ridding on surface of antenna wire, when it hits the corner it wants to fly off into space, so with copper elbow maybe ..
INVENTOR3 1 year ago
@INVENTOR3 con't........current will run from outside of wire to inside wall of elbow, and then back to outside of antenna wire down to circuit. Maybe this will help, or maybe it is better without the bending over second board. I have noticed that the antenna wire does not like to be bent around corners too much either. You will at least triple your readings when you put coil at ground end with ground running through it :-) Great videos and blog site! you are sooo close to having great results!
INVENTOR3 1 year ago
also make your barrie a large copper plate ie 10 x 10 inch in the ground and attach / solder to the pipe this may increase your current, pls post picture of your circuit with
cap diodes transistor etc hard to follow you.
eloid777 1 year ago
@eloid777 check out my videos....free energy circuit-how to part 1 to 3, lots of info there. 10 x 10 plate,,,i was thinking about this when i first made my ground,,i was concidering a 4 foot square copper plate horizontaly in the ground,,but a lot of digging and expensive plate,,,maybe i will try at a later time. First i think i need to get my circuit resonating.
INVENTOR3 1 year ago
i would try to improve dielecctric property of the soil, ie adding vinagar to the soil
eloid777 1 year ago
Hi Paul, i just finished watching some video's about this inventor Kapanadze. His set-up has been replicated by Jean-Louis Naudin (google his name to find the website). The coil construction in the Kapanadze set-up is quite interesting. I wander what you think about it?
mistaxdeman 1 year ago
@mistaxdeman Funny, i am a member of the JLN Labs,,,hahaha, now i know what JLN stands for. I looked at video with the coil, interesting, wraped clockwise then counter clockwise then clockwise again with larger wire,,,almost acting as a transformer like a tesla coil does. he should try to tapping into differant spots on his larger windings, maybe to hit a point of resonance. very interesting video, thanks.
INVENTOR3 1 year ago
Paul, please watch the video's by Stan Deyo on anti gravity (8 parts) and about The Montauk and Rainbow project(10 parts). They could help you to build a better receiver. Thicker insulated wire (insulated for 30.000 Volts) in hexagon format hanging in the air.
MrEnricozzz 1 year ago
I made a replica. I have the circuit using my metal roof as the antenna and a large stainless grounding rod. I am getting about 5V DC and 0.00 milliamps. Any ideas?
berilium16 1 year ago
@berilium16 i would love to see some photos. without seeing your set-up, i would suggest now adding the coils. (1) 16" long coil, .034 wire around 2.375 dia PVC pipe. if you come this far...adding the coil will greatly increas things now. Build the coil and i can help you connect it into the circuit, if it is unclear from the videos.
Great job so far! a lot of people have a hard time just getting 5 or 6 volts,, but you have :-)
INVENTOR3 1 year ago
Are you gonna try the screen? If that doesn't work maybe a large shiny piece of aluminum.
berilium16 1 year ago
@berilium16 well, i tried to mount the screen at the top of pole, but was to heavy for pole, pole bends like fishing rod. I guess i could try the screen at ground level...
I did try copper plate, but not as good as antenna, but both together was a little better, but again i have not been able to mouint the copper plate to the top of this particular set up....I will try this. Thanks for comments.
INVENTOR3 1 year ago
Google this: Over Unity Physicists and Applications - a history lesson
and it should be the first selection. It very interesting!
swerlyjoe 1 year ago
@swerlyjoe Very good reading, i must print this out, thanks!
About OU....im starting to think it is impossible to get more out then put in.....but if the x-tra energy is coming from unexsplained/unidentified source, then to lable OU.
I am convinced that there is a sea of matter and energy all around us, not just man made. Thanks for the link, i will definately print and finish reading.
INVENTOR3 1 year ago
Comment removed
swerlyjoe 1 year ago
I wonder if a joule thief circuit and/or Steve Marks TPU would help amplify the current?
swerlyjoe 1 year ago
@swerlyjoe I want to try the improved joule thief circuit by bedini. Hmmm, TPU by Steve Marks sounds familiar, i will look it up again.
thanks for the sugestions.
INVENTOR3 1 year ago
WHERE'S THE NEW STUFF?
zachariapierce 1 year ago
@zachariapierce I got 3 new videos made now, but will be posting them next week, and they are on a different project, a good one.
INVENTOR3 1 year ago
tnx 4 sharing your experiments.....more power
philippineagles 1 year ago
put 4000 winds in a circle wound around a 5 gal bucket and stick that on a pole in the air , You will get voltage you wont believe , it picks up stray rf . then get an antenna tuner and put it in line with it so you can tune it to more and less .
Mastahscott 1 year ago
@Mastahscott interesting, thanks.
INVENTOR3 1 year ago
I have been doing a lot of experiments, and have found that using a very deep ground rod , and multiple ground rods is the key to producing a lot of amperage. Get the 8 foot long ground rods from Lowes. they are not that hard to drive in all the way in with a go devil hammer. It will make alot of difference.
Lvegeta999 1 year ago
@Lvegeta999 Thanks, good idea, because i just saw that hammer, not bad with the hammer, no need to dig deep hole :-)
INVENTOR3 1 year ago
We beings of free will have been short changed longer lifespans.
Anothercoilgun 1 year ago
So let me get this straight. you said one makes about 60 micro amps, that is (60 * 10^-3) = 0.06 Amps. So if you hook up 25 of these you would have 1.5 amps, or enough to slowly charge a car battery?
Do you use the same antenna when you have two connected?
ibpointless2 1 year ago
@ibpointless2 well, i have tried to connect multiple circuits together in series and in parallel, but did not increse current. I dont understand myself.
I do use only 1 antenna for 2 circuits. I have diagram here... paulslab. blogspot. com
INVENTOR3 1 year ago
@INVENTOR3 This circuit doesnt seem right? Im thinking I could make it better, because the circuit seems to be wasting electricity or not using it at its best ability. But I wont know until I experiment with it.
Great job on the project it has really inspire me.
ibpointless2 1 year ago
@ibpointless2 I agree with you completely, it is inefficient. Yes, Must be improved!
i think it is only grabbing a very small amout of the potential energy that is there.
I want to try to make the circuit resonate at 7.8 (schumann resonace frequency).
Glad to hear that this inspired you! experiment and have fun. Please let me know if you have good results.
INVENTOR3 1 year ago
Maybe have a coil from the antenna to the cap positive, and a coil from the ground to cap negative. Maybe try a generic vacuum tube instead of the spark gap! The switch from the gap or tube should occur similar to the one in the Tesla coil between the high voltage drive and the positive side of the primary coil. Think Tesla coil backwards.
Objectivityiskey 2 years ago
I would love to get a generic vacuume tube, where can i find one. Or how can i make one,,,,,do they have a kit out there?
millanyangle @ yahoo . com
INVENTOR3 2 years ago
have you tried making a laden jar style capacitor out of a home depot large plastic paint can? look on instructables for the laden jar of death. These capacitors are better for gathering high frequency waves. Try a spark gap that is connected to a step down transformer to increase current. You may need multiple step down transformers in a chain where the secondary becomes the primary of the next in the chain. Make sure to put a non polarized cap between primary and secondary in parallel.
Objectivityiskey 2 years ago
Interesting, better for capturing high frequency.
This is what Tesla used. :-)
INVENTOR3 2 years ago
could you energize the antenna in order to improve the receiving capacity. This also works with a very small tv antenna. By energizing it the antenna grows in size exponentially. I used to have a small energized tv loop antenna. Very powerful !
MrEnricozzz 2 years ago
Very good question. Yes, maybe, something i have read about many times. Makes a small antenna act like a large one. It would probly be a complex circuit that maybe above my expertise of understanding how to build. but then again will there be enough power to run all the components, or will you have to add a power source to only the antenna first. I think if we got the proper circuit and ran in resonance frequency,,,it would not matter how big the antenna is.
INVENTOR3 2 years ago
I have been wanting to try a fractal antenna,,,it recieves a very large range of frequencies....this would be interesting to try.
INVENTOR3 2 years ago
can you charge a battery with just voltage.
teslacoil041 2 years ago
i would think you need at least a little current just to move the voltage from 1 place to another.
Current will probly determine how long it will take to charge it.
I will have to try it, thanks.
INVENTOR3 2 years ago
Hey Great !!! I've been out of the loop for a while: ( Have you ever tryed to hook a joule thief up to your circuit? Let me know if you get the time.And thanks again for sharing. Brmdunn
brmdunn 2 years ago
No joule thief yet. Lot of rain this month, grrrrr.
im ready to test second circuit with a second antenna and put both outputs together,,,,,should be interesting.
INVENTOR3 2 years ago
I think you might need a combination of variable resistors and variable indutance so you can find resonance.
teslacoil041 2 years ago
I was thinking about that also, yes.
This is what i was thinking about using on my tesla coils to help in tuning those....but those will be worked on soon. Weather is turning on me fast. Temp is only in the 50ties now. Last 2 weekends i got rained on 3 times(drenched), but i managed to get a second circuit and antenna wire put up in the rain, but was not able to test yet!!!
INVENTOR3 2 years ago
Have you ever tried a tuneable inductor.I think you can do it with a ferrite rod in the center and just move the rod to change resonance.Just a thought
teslacoil041 2 years ago
Like in video 16, using the ferrite rod.
But no, i have not tried a variable induction coil or resistors.
INVENTOR3 2 years ago
i was wondering, would it make any diffrence if you added larger capicitors, for example two 200 micro farad electrolytic capacitors
thenikroks 2 years ago
Good question.
Hmmm, im have tried adding more caps, and i was going to try to charge a very large cap,,but i have not tried to just go to bigger caps.
Thanks for the idea
INVENTOR3 2 years ago
After the third tribulation, a new source of energy will be discovered that taps the Earth Magnetic field."
BY NATHAN STUBBLEFIELD
jamesd55100 2 years ago
I will...thank you.
I have quickly looked him up and read a little....but never really studied his work....i will now :-)
INVENTOR3 2 years ago
I think your on the right track to free energy. please check out info from mr. nathan stubblefield and earth magnetic currents and earth batterys. his work might give you more ideas.
jamesd55100 2 years ago
thanks for all you are doing keep up the good work it will work out in the end.
jamesd55100 2 years ago
Thanks.
It gets frustrating some times...many experiments with no results that i wanted.
But very rewarding when i get results that i do want.
INVENTOR3 2 years ago
Believe me, I know how frustrating this can be, just keep in mind how this system works and you'll be fine. It is tunable and must be tuned, just like a radio. But you already have quite enough to charge batteries for free for ever. So while experimenting, you can still use the power if your willing to store it. The rate at which you can charge is a true test of power utilizing a true load. A dead battery is quite a load. Give it a try sometime...
FiniteTuning 2 years ago
yes, i will have to try for sure charging a battery.
Must tune the circuit. I think i will start with the coil, and make caps to match it.
INVENTOR3 2 years ago
Yes Paul we are following you!! Look behind ya. Thanks for doing the work sir!!!!
mitchelltbatten 2 years ago
Hehehhe...thanks!
INVENTOR3 2 years ago