Just installed the exact same slip-ons (V&H Tapered slash cut) on my 07 Road King, sound is amazing deep and loud with a good tone, i will record it and post it. But did you buy the FuelPak? or its not that much important?? i refilled my bike with gas and will measure how much it will drive with full after slip-ons without fuelpak to compare.
Great video Carlos. Only one question; since you didn't install a fulepak or a power commander, what do you think about having the EFI remaped by HD? Do you get as much power out your pipes without this?
Great video Carlos. Only one question; since you didn't install a fulepak or a power commander, what do you think about having the EFI remaped by HD? Do you get as much power out your pipes without this?
No grease needed, it's just going to smell as you heat up the bike. If the bolts your removing are really rusty just shoot some WD40 on the threads. Good luck
I like the Lower tone, but I would recommend you go to a bike shop and ask them to turn on a few bikes so you can hear what you like. They should have many styles.
I had a 2004 Sportster. I put some Rush pipes on it, and it seemed to run fine, maybe a SLIGHT bit leaner without any carb work. But after I additionally installed an S/E intake, it ran WAY too lean for the stock carb settings. After I went ahead and swapped out the jets and the needle, the bike ran better in every way. Power, response, everything.
Great Video..I'm buying a Nightster and was thinking of putting slip ons on...I have never owned a bike before...would you say I would be able to put on the slip ons by myself? It looked so easy for you. I think I can manage...sorry if it's a dumb question.. : )
Very Helpful video,I'm looking to do the same to my '06 RoadKing.How did you find out you didn't need to do a Stage 1 or any other special engine work?I don't want to spend the extra $ if I don't have to!
Thanks for the feed back, when I was searching for pipes there was not to many install videos so I figured I would show how easy it was to install yourself and save the $
Thanks for the feed back, when I was searching for pipes there was not to many install videos so I figured I would show how easy it was to install yourself and save the $
baya papa, good job. They sound bitchin'!
adriannyasia 1 year ago
Once the mufflers are installed, do you have to remap the onboard computer or is the bike ready to ride?
rchann2662 1 year ago
Great video, thanks for the lesson!
rchann2662 1 year ago
Just installed the exact same slip-ons (V&H Tapered slash cut) on my 07 Road King, sound is amazing deep and loud with a good tone, i will record it and post it. But did you buy the FuelPak? or its not that much important?? i refilled my bike with gas and will measure how much it will drive with full after slip-ons without fuelpak to compare.
adiab66 1 year ago
hola buen video hermano . acabo de adquirir una road king police 2001 y me gustaria me instruyeras como hacerle el cambio de aceite gracias.
lindaev1 1 year ago
I just put a set on my flh,love the sound
harley1450000 1 year ago
sounds nice,how much were the mufflers? if i may ask.
harley1450000 1 year ago
Great video Carlos. Only one question; since you didn't install a fulepak or a power commander, what do you think about having the EFI remaped by HD? Do you get as much power out your pipes without this?
JPB14 1 year ago
Great video Carlos. Only one question; since you didn't install a fulepak or a power commander, what do you think about having the EFI remaped by HD? Do you get as much power out your pipes without this?
JPB14 1 year ago
Which model of pipes are these??
red33m23 1 year ago
No grease needed, it's just going to smell as you heat up the bike. If the bolts your removing are really rusty just shoot some WD40 on the threads. Good luck
carlosluy 1 year ago
How about some anti-sieze grease on the bolt threads and silencer / exhaust pipe sleeve ?
stevehalbers 1 year ago
carlos do you prefer vance and hines over screaming eagle pipes?
bozo47p 1 year ago
I like the Lower tone, but I would recommend you go to a bike shop and ask them to turn on a few bikes so you can hear what you like. They should have many styles.
carlosluy 1 year ago
Great tutorial Carlos...Thank You!
Couple questions I believe everyone is thinking but not asking
Whenever asking about new pipes mostly all of us have been told we need a stage 1 kit as well as a tuner for new pipes.
Is this true or can we just put the new pipes on and ride?
About $400 as opposed to $1500 would be great!
I have a 2008 Street Glide and I am sick of the stock lawnmower exhaust tone.
Thanks,
Chris
crisscreations 2 years ago
@crisscreations
Hi Chris you don't need a stage Kit or tuner. The slip on pipes work just fine.
carlosluy 1 year ago
For anyone who knows. I've got a 2005 sportster (one of the last with a carb) and want to get some slip ons for it.
watching this video it seems pretty easy to install. I don't have to worry about adjusting the air/gas mixture do I?
athroughme 2 years ago
@athroughme
I had a 2004 Sportster. I put some Rush pipes on it, and it seemed to run fine, maybe a SLIGHT bit leaner without any carb work. But after I additionally installed an S/E intake, it ran WAY too lean for the stock carb settings. After I went ahead and swapped out the jets and the needle, the bike ran better in every way. Power, response, everything.
Azbikerboy 1 year ago
Great Video..I'm buying a Nightster and was thinking of putting slip ons on...I have never owned a bike before...would you say I would be able to put on the slip ons by myself? It looked so easy for you. I think I can manage...sorry if it's a dumb question.. : )
hippiessuckit 2 years ago
Just make sure you have an inpact gun for the bolt on the exghust. Other than that I don't see why not.
carlosluy 2 years ago
Thanks!
hippiessuckit 2 years ago
impact gun*
James95Dean 1 year ago
@James95Dean It makes the job easier if the pipes have been on the bike for a while. Good luck
carlosluy 1 year ago
Very Good
Thanks
TheDiazandPartners 2 years ago
Very Helpful video,I'm looking to do the same to my '06 RoadKing.How did you find out you didn't need to do a Stage 1 or any other special engine work?I don't want to spend the extra $ if I don't have to!
Thanks,btw,Great Scoot!! :)
irishpat64 2 years ago
I asked the dealer, they stated not necessary. I havn't felt any difference in the engine or power. You should be fine. Good luck
carlosluy 2 years ago
Comment removed
irishpat64 2 years ago
Thank you so much ! you are the man.
absoft2000 2 years ago
@absoft2000 Good Luck, Ride with Caution!
carlosluy 2 years ago
Helpful video. Thanks.
SfcBrandies 2 years ago
@SfcBrandies Ride with Caution Good Luck
carlosluy 2 years ago
did you have to put a power commander on your bike and stage1 air cleaner?
ctotoye2 2 years ago
No it was not needed, and the bike runs great no difference in power. No need to spend the $
carlosluy 2 years ago
Thanks for the video! Nice job!
moulin6801 2 years ago
Thanks for the feed back, when I was searching for pipes there was not to many install videos so I figured I would show how easy it was to install yourself and save the $
carlosluy 2 years ago
I have a 09 street Glide and appreciate your video I'm sold on Vance and Hines. Good job looks great.
craig18547 2 years ago
Thanks for the feed back, when I was searching for pipes there was not to many install videos so I figured I would show how easy it was to install yourself and save the $
carlosluy 2 years ago