i dont mean to keep bothering you in your vids lol, i programmed my fob using your video about 4 months ago and it works great. but i have a question about the alarm. Is the alarm supposed to sound when opening the trunk also? or is are alarms only for the 4 doors being opened?
@richpin06a well dang lol, my light doesn't work and im not sure why, i followed your video about troubleshooting it and couldn't troubleshoot why it wouldn't turn on, it had ground/electric and the copper connector is as clean as it gets, and the light has been replaced
@richpin064 mine didnt work for some reason lol. i attemped this and the remote didnt work at all anymore, then i read the book tht came with my saturn and they told me how to reboot it back to how it was before. U kno where i went wrong? the weird sound tht i heard on ur video when u turned the keys i didnt hear.
I live in McAllen, TX.... do you know that here they charge you $110.00 Dlls. to reprogram you RKE ?? but I guess nobody goes to do this reprograming there at the Dealer's.
@richpin064 what if u changed the key lock cylinder though. Will tht mess it up, do the orignal key have a chip in it or sumthing before i attemp this?
How do you program a whole new remote to a 1999 SL2? I lost my only remote and bought a new one online, but i cannot figure out how to program it to the car.
@mgza2007 Find the Diag connector to the left of the column attached to the dash below the steering wheel. (The thing a scan tool plugs into)
You will see two rows of little sockets or pins. Counting from left to right, TOP ROW, Jumper pins 4 and 8 (a paper clip bent into a "U" works well for this) .
The door locks should cycle and trunk pop open.
Depress lock and unlock button AT THE SAME TIME on the remote you want to program until locks cycle again. (This can take up to 1 minute)
@richpin06a When i jumper the two pins the horn beeps quick 4 times, but the locks don't cycle and the trunk doesn't pop. I'm not sure what to do next.
what are the other modes? what is the mode that returns it to stock? 1? Will this work with a 2001 GMC yukon XL? It has the same remote as yours there
2007 impala; keyless remote will not work from an outside remote position but once the door is opened with the key, the remote opens and closes the doors and even starts the engine. Is this the same programing to restore the keyless entry function or a different procedure ??
Here we go again; another problem out of a clear blue sky that require$ a trip to the dealer. It just surprises me because there is a button on the dash that says program the remote keyless entry and holding down both lock and unlock buttons gets a 2 beep response, but exterior entry still doesn't work but once the key is used manually, all functions work.
Thank you for the information....I have a question...I have 2 sets of keys....One for me and one for my wife....Do I have to perform all the steps TWICE...one key at the time?....Please respond
Could you make a video on how to install power locks, and than program the remote? I am in the process of getting things ready to install power locks on my 97' SC1
Hi I have a 1996 bonneville SSEI. I don't have a number 8 pin on my OBD2 port so does that mean that I have to go to the dealer to my new remote programed?. my friend just gave me another key fob so I would just like to have a spare. It said on another web sight to do the sam thing as on this car as fare as getting another key fob to work.
I had no idea remotes were so easy to reprogram until I saw this vid. I was able to reprogram a RKE fob from a 97 SC2 to my 97 SL2. Initially I could not get the remote to reprogram to work on my car (SL2). Finally I popped the remote open to temporarily disconnect its battery and then tried again- this seemed to do the trick for my case. There is text inside the remote case which reads "depress lock and unlock buttons for 7 seconds to reset"... confirming richpin's reply.
I have a 96 saturn and you said this might work, I want to turn off the horn chirp with one push of the lock button, so the doors just lock. Can I do this do you know how?
To reprogram remote jump pins 4 and 8 like i did in the video then depress lock and unlock buttons AT THE SAME TIME on the remote you want to program until locks cycle again.
That's really cool, I have a 95 with the problem that my remote only works properly sometimes, it will work fine locking and unlocking doors for a while then randomly only trip the alarm and shut it off, I dont know how to fix it tho :(
If I want to leave mine in the mode that its already in (hit lock twice to arm) do I have to turn the key to the run position at all?
dodgerman16 5 days ago
@dodgerman16 You are not changing anything so you would not have to do anything.
richpin06a 4 days ago
i dont mean to keep bothering you in your vids lol, i programmed my fob using your video about 4 months ago and it works great. but i have a question about the alarm. Is the alarm supposed to sound when opening the trunk also? or is are alarms only for the 4 doors being opened?
1991darkmage 4 weeks ago
@1991darkmage I never tried the trunk.I would think if the light goes on in the trunk the alarm would go off.
richpin06a 4 weeks ago
@richpin06a well dang lol, my light doesn't work and im not sure why, i followed your video about troubleshooting it and couldn't troubleshoot why it wouldn't turn on, it had ground/electric and the copper connector is as clean as it gets, and the light has been replaced
1991darkmage 4 weeks ago
Hello, will this work on my 2004 saturn vue ? Thank You.
oldbigwig55 2 months ago
@oldbigwig55 I do not think so but i am not positive about that.
richpin06a 2 months ago
This has been flagged as spam show
my jimmy dosent have a panic botton could i get a remote with the panic botton and program it and use the botton?
wtl1964 3 months ago
@richpin064 mine didnt work for some reason lol. i attemped this and the remote didnt work at all anymore, then i read the book tht came with my saturn and they told me how to reboot it back to how it was before. U kno where i went wrong? the weird sound tht i heard on ur video when u turned the keys i didnt hear.
omarG19100 9 months ago
I live in McAllen, TX.... do you know that here they charge you $110.00 Dlls. to reprogram you RKE ?? but I guess nobody goes to do this reprograming there at the Dealer's.
dianadubby 9 months ago
@dianadubby Did not know that $110. wow
richpin06a 9 months ago
@richpin064 oh ok thanks man.
omarG19100 9 months ago
@richpin064 what if u changed the key lock cylinder though. Will tht mess it up, do the orignal key have a chip in it or sumthing before i attemp this?
omarG19100 9 months ago
@omarG19100 Changing the lock will not effect the programming.
richpin06a 9 months ago
yoooo u the man son. thanks imma do this job.
omarG19100 9 months ago
can you find a way to do it for a 2003 saturn lw200
Jjose805 1 year ago
@Jjose805 Can not do after 1999 it is off to the dealer
richpin06a 1 year ago
How do you program a whole new remote to a 1999 SL2? I lost my only remote and bought a new one online, but i cannot figure out how to program it to the car.
mgza2007 1 year ago
@mgza2007 Find the Diag connector to the left of the column attached to the dash below the steering wheel. (The thing a scan tool plugs into)
You will see two rows of little sockets or pins. Counting from left to right, TOP ROW, Jumper pins 4 and 8 (a paper clip bent into a "U" works well for this) .
The door locks should cycle and trunk pop open.
Depress lock and unlock button AT THE SAME TIME on the remote you want to program until locks cycle again. (This can take up to 1 minute)
by wolfman
richpin06a 1 year ago
@richpin06a When i jumper the two pins the horn beeps quick 4 times, but the locks don't cycle and the trunk doesn't pop. I'm not sure what to do next.
mgza2007 1 year ago
@mgza2007 Look in your inbox i will send you a link you can fallow.
richpin06a 1 year ago
Can you put it in different modes like turn the key 3 times instead of 4so the car is in a "mode 3" ?
Ownagewithasmile 1 year ago
@Ownagewithasmile yes you can
richpin06a 1 year ago
iam looken for one..for a 85 impala
ytpboiz 1 year ago
is ths work for 00honda accord <?
marioflores768 1 year ago
By any chance do you know if these steps are familiar for a 2004 Saturn L300? I really want to get my friend a new remote and surprise him. Thanks
asb81689 1 year ago
@asb81689 I do not.
richpin06a 1 year ago
how to programming 2000 lincoln ls
blahasdfg 1 year ago
will this work for chevy cavalier 2001?
baril5566 1 year ago
what are the other modes? what is the mode that returns it to stock? 1? Will this work with a 2001 GMC yukon XL? It has the same remote as yours there
ipodtouchfan221 1 year ago
Any ideas or ways on programing a keyless remote to a 2006 pontiac G6
fabnasty1 1 year ago
2007 impala; keyless remote will not work from an outside remote position but once the door is opened with the key, the remote opens and closes the doors and even starts the engine. Is this the same programing to restore the keyless entry function or a different procedure ??
uranut 1 year ago
@uranut No it is not, i have not come across this problem before.
richpin06a 1 year ago
Here we go again; another problem out of a clear blue sky that require$ a trip to the dealer. It just surprises me because there is a button on the dash that says program the remote keyless entry and holding down both lock and unlock buttons gets a 2 beep response, but exterior entry still doesn't work but once the key is used manually, all functions work.
uranut 1 year ago
Thank you for the information....I have a question...I have 2 sets of keys....One for me and one for my wife....Do I have to perform all the steps TWICE...one key at the time?....Please respond
Thanks
tumamacantaybaila 2 years ago
The keys do not talk to the module,so the answer is one key.
richpin06a 2 years ago
you sound like peter griffin
iphailedpreskool 2 years ago 4
I thought it was Ray Romano.......lol
richpin06a 2 years ago 6
It iiiiis!
ipodtouchfan221 1 year ago
i dont no how to install the remote key program
can you please help me
SuperBhargavpatel 2 years ago
Could you make a video on how to install power locks, and than program the remote? I am in the process of getting things ready to install power locks on my 97' SC1
BeachBabby233 2 years ago
98 lesabre with chip key might it work? same remote
nicoli669 2 years ago
Great video!!!!!!!!!!!
Godalmighty7771 2 years ago
and could i make my lights flash too?
mustangrules 2 years ago
will this work on 98 malibu?
mustangrules 2 years ago
hi some one know how programing my dodge intrepid 02 whitout remote's
alexand3r5922 2 years ago
can u do it to a 1999 blazer
blawson1122 2 years ago
Hi I have a 200 Chevrolet Cavalier and with the same remote u have on the Saturn dose that tecneque work for my car ?
Please let me know thankyou
LonRoge 2 years ago
2000 Chevy cavalier
LonRoge 2 years ago
Hi I have a 1996 bonneville SSEI. I don't have a number 8 pin on my OBD2 port so does that mean that I have to go to the dealer to my new remote programed?. my friend just gave me another key fob so I would just like to have a spare. It said on another web sight to do the sam thing as on this car as fare as getting another key fob to work.
workensmart 2 years ago
I had no idea remotes were so easy to reprogram until I saw this vid. I was able to reprogram a RKE fob from a 97 SC2 to my 97 SL2. Initially I could not get the remote to reprogram to work on my car (SL2). Finally I popped the remote open to temporarily disconnect its battery and then tried again- this seemed to do the trick for my case. There is text inside the remote case which reads "depress lock and unlock buttons for 7 seconds to reset"... confirming richpin's reply.
ripcords74 2 years ago
If you have no
pin in #8 you can not do this.
richpin06a 2 years ago
If you have no pin in #8 you can not do this.
richpin06a 2 years ago
Will this method also work for a 2002-2006 ION (Quad Coupe)?
blucat1940 2 years ago
Do you know where the OBD connector in a 2000 Ods Alero Sedan V6 is?
huskykid776 2 years ago
Alero no but most all are located in the general area of this Saturn.
richpin06a 2 years ago
ok just answered it for myself.... NOPE. cuz i dont have a contact in pin 8 :P
andysouza3235 3 years ago
any chance it works on an 01??
andysouza3235 3 years ago
I have a 96 saturn and you said this might work, I want to turn off the horn chirp with one push of the lock button, so the doors just lock. Can I do this do you know how?
reanm8r 3 years ago
Mode #1 will lock the doors without chirping the horn.Cycling the key once will put the RKE in mode #1.
richpin06a 3 years ago
This does not work on my 96. I could not get it to go into any modes. If I hold the buttons the horn doesn't chirp but the door locks cycle...
reanm8r 3 years ago
just did this on my car! took all of 3 minutes! Thanx!
uncoverbrother 3 years ago
Great Video. Is this how you would program a replacement remote to connect to this car?
CanadianBackBacon 3 years ago
To reprogram remote jump pins 4 and 8 like i did in the video then depress lock and unlock buttons AT THE SAME TIME on the remote you want to program until locks cycle again.
richpin06a 3 years ago
wow, is that all there is to programming a new remote? I paid the dealership $70 for that?! amazing...
uncoverbrother 3 years ago
will this work on all GM car of that year?
Evmoy15 3 years ago
Richpin, So you can't do this to the 96 model year? Is it because it doesn't have the panic alarm?
Saturnvue2005 3 years ago
This might work on a 96 but i am not 100% sure of that.
richpin06a 3 years ago
ok, Thanks for responding back richpin. I'll check it out, and see. :)
Saturnvue2005 3 years ago
That's really cool, I have a 95 with the problem that my remote only works properly sometimes, it will work fine locking and unlocking doors for a while then randomly only trip the alarm and shut it off, I dont know how to fix it tho :(
sm870621345 3 years ago