It took a Ferry Accident in New York Harbour to stumble onto the clearer explanation of my Turbine!
It turns out that an Austrian Engineer “Ernst Schneider” had the very same idea some “80 years ago” . As I was completely unaware of its existence, I do not expect an infringement on a patent. In any case my model is not as complicated as the “Fischer” system. He complicated it by introducing the “Nutral” revolution of the “Blade Attack Angle”.
I advice you to look again at the video, and then stop it intermitently so you are able to observe that each of the (so called) wings attack angle, changes continually on its travel of each revolution. Then have a look at the other video where it is not moving unless I move it by hand and you will see that the axle thereof has a crank at the far end. To this crank each wing is attached by a rod which you can clearly see if you slow it down sometimes,
this is absolutely right for a wind turbine. exept for a water turbine spinning in a horizontal position in somm cases might be preverential. the wind blowing from enny direction, wheras water is only from a single direction. in the case of tidal of ozean innland-arms the flow direction wil alternate back and fort.
can you make an other video of how to make this and maybe create energy please and thank you
Shadeslayerism 11 months ago
Helo:
It took a Ferry Accident in New York Harbour to stumble onto the clearer explanation of my Turbine!
It turns out that an Austrian Engineer “Ernst Schneider” had the very same idea some “80 years ago” . As I was completely unaware of its existence, I do not expect an infringement on a patent. In any case my model is not as complicated as the “Fischer” system. He complicated it by introducing the “Nutral” revolution of the “Blade Attack Angle”.
peterruoss 1 year ago
Can you make it vertical so if the wind blows 90 degrees you still spin?
WizzleThump 1 year ago
This desingn is not very effective because of the "wrong" direction of the wings. It won´t work in the other wind-direction.
please excuse my english :-)
heizung4me 2 years ago
Dear heizung4me:
I advice you to look again at the video, and then stop it intermitently so you are able to observe that each of the (so called) wings attack angle, changes continually on its travel of each revolution. Then have a look at the other video where it is not moving unless I move it by hand and you will see that the axle thereof has a crank at the far end. To this crank each wing is attached by a rod which you can clearly see if you slow it down sometimes,
Thank you,
Pete
peterruoss 2 years ago
could this power a light bulb and could u show how u made it
that would be great thanks
cookiekonichiwa 2 years ago
great piece looks like it'll turn like a pro keep us posted on anymore trial runs
j2dap77 2 years ago
this is absolutely right for a wind turbine. exept for a water turbine spinning in a horizontal position in somm cases might be preverential. the wind blowing from enny direction, wheras water is only from a single direction. in the case of tidal of ozean innland-arms the flow direction wil alternate back and fort.
peterruoss 3 years ago
it seems to be spinning very well. it's probably more suited for vertical use as a wind turbine or for hydro turbine.
bogdanp9 3 years ago