This stuff made RHW look amazing but after trying it, I hated it. Even putting a simple overpass and/or onramp is a page-long process and requires pretty much demolishing a large area. Plus my RHW roads don't have any traffic, which adds to the pointlessness of this mod.
The default highways might be crap, but hey, they actually AREN'T BROKEN.
@TheCanadianPenguin RHW isn't broken. If I dare say so, it's probably because they're in the wrong place, or you might have built them incorrectly. The best place to get some tech support on how to use the RHW if you're having problems is the simtropolis forums. =]
NAM causes my Simcity 4 to crash very often, is there a way to fix this? because I would love to use it but I have lost so much progress because of it just randomly crashing that it was not worth it to have to constantly save it every 2 mins (takes away from the fun)
Ooooh blimey. I'm completely the wrong person to ask for stuff like this. IT's probably a plugin conflict of somesort. The best people to ask are on the technical forums of SC4Devotion and Simtopolis.
Thanks for your tutorials, very helpful. But I've some troubles trying to create this diamond. When I try to connect interchange piece with road, it says I can't because tile is already filled, with the piece of the bridge. I even can't cross a road perpendicular over there, to level the slope as you do. I must make two roads, one on each side of the bridge to level the ground. What I'm missing? I'm using NAM May 2010, RHW 4.0 and BRF slope. I can't manage to do it with NHP Ennedi mod. Thanks.
There are two reasons why this could happen. The first is that you're using the on-slope piece instead of the T-on-slope piece. The second is when SC4 bugs out a little (happens to me sometimes too) - The way to get around this is to try draging road about and flattening around the area affected. If it still doesn't behave, just demolish the area in question and start again.
@Asteconn I have tried to build a windmill today, but it takes a lot of time... It is hard to create a good looking one, mine isn't looking good enough for a video /picture.
I have a LOT of mods (about 1½ Gigs worth). If you're looking for some decent mods to improve the gameplay, go to the STEX and look at the "Essential Modds" and "General Modds" categories.
from where did you get the alternative street ending, shown at 1:41 ? (the mod that makes the end of streets circlular) I was looking for that but couldn't find it. please tell me the link! =]
omg this vid makes it look sooo easy! but it is IMPOSSIBLE to get those on ramps going on the right way! like none can go on the highway!
chrispy199 4 months ago
This stuff made RHW look amazing but after trying it, I hated it. Even putting a simple overpass and/or onramp is a page-long process and requires pretty much demolishing a large area. Plus my RHW roads don't have any traffic, which adds to the pointlessness of this mod.
The default highways might be crap, but hey, they actually AREN'T BROKEN.
TheCanadianPenguin 10 months ago
@TheCanadianPenguin RHW isn't broken. If I dare say so, it's probably because they're in the wrong place, or you might have built them incorrectly. The best place to get some tech support on how to use the RHW if you're having problems is the simtropolis forums. =]
Asteconn 10 months ago
@TheBlaubarschdude
An bhuil Béarla agat le do thoil?
Asteconn 11 months ago
how u build a bridge over the highway? none of my pieces can get over
TheGreatTitanor 11 months ago
@TheGreatTitanor
Have a look at the previous video. Tells you how to do exactly that.
Asteconn 11 months ago
australia drive on the left
japan drive on the left
south africa drive on the left
but whatever
MRFRUITCAKE98 1 year ago
NAM causes my Simcity 4 to crash very often, is there a way to fix this? because I would love to use it but I have lost so much progress because of it just randomly crashing that it was not worth it to have to constantly save it every 2 mins (takes away from the fun)
xcstacy2 1 year ago
@xcstacy2
Ooooh blimey. I'm completely the wrong person to ask for stuff like this. IT's probably a plugin conflict of somesort. The best people to ask are on the technical forums of SC4Devotion and Simtopolis.
Asteconn 1 year ago
Thanks for your tutorials, very helpful. But I've some troubles trying to create this diamond. When I try to connect interchange piece with road, it says I can't because tile is already filled, with the piece of the bridge. I even can't cross a road perpendicular over there, to level the slope as you do. I must make two roads, one on each side of the bridge to level the ground. What I'm missing? I'm using NAM May 2010, RHW 4.0 and BRF slope. I can't manage to do it with NHP Ennedi mod. Thanks.
TheAlcmeonida 1 year ago
@TheAlcmeonida
There are two reasons why this could happen. The first is that you're using the on-slope piece instead of the T-on-slope piece. The second is when SC4 bugs out a little (happens to me sometimes too) - The way to get around this is to try draging road about and flattening around the area affected. If it still doesn't behave, just demolish the area in question and start again.
Asteconn 1 year ago
@Asteconn Thanks, Asteconn. It was the first: I was using a wrong piece. Thanks for your answer and for your tutorials. Good job.
TheAlcmeonida 1 year ago
@Asteconn Ah, yes, it was the first case: a wrong puzzle piece. Thanks for your quick answer and thanks again for your tutorials.
TheAlcmeonida 1 year ago
Do You Have Rush hour Or Deluxe?
TheDownloadPerson 1 year ago
@TheDownloadPerson
Deluxe, but having either is needed.
Asteconn 1 year ago
how do youo install the hole digging modd?
Guitarlover762 1 year ago
@Guitarlover762
Drag it into your plugins folder =]
Asteconn 1 year ago
can you show how to build a windmill and a turbine interchange in SC4?
Pomfuttge 1 year ago
@Pomfuttge
I'll be showing those when I've managed to perfect the tutorials yes ^^. They're very complicated though, as you could well imagine.
Asteconn 1 year ago
@Asteconn I have tried to build a windmill today, but it takes a lot of time... It is hard to create a good looking one, mine isn't looking good enough for a video /picture.
Pomfuttge 1 year ago
nice man thanks form Mexico sorry for my bad english :D
pedromgta 1 year ago
I love these tutorials
patchbowen 1 year ago
Hello, would you mid telling me what mods you have only the ones you use the most. If you don't mind.
simmy240 1 year ago
@simmy240
I have a LOT of mods (about 1½ Gigs worth). If you're looking for some decent mods to improve the gameplay, go to the STEX and look at the "Essential Modds" and "General Modds" categories.
Asteconn 1 year ago
from where did you get the alternative street ending, shown at 1:41 ? (the mod that makes the end of streets circlular) I was looking for that but couldn't find it. please tell me the link! =]
NickOfThessaloniki 2 years ago
@NickOfThessaloniki
It's the "Street Cul-de-sac Mod". Search for it on the Stex, as youtube won't let me link in a comment.
Asteconn 1 year ago
when i enter the nam thingy i cant find the download link.
sitejunction 2 years ago
You need to register on the site first ;)
Asteconn 2 years ago
You forgot one very important depenedcy, NAM and RHWM
Lugnuts25 2 years ago
I was going for a higher minimum common denominator, but I suppose it certainly doesn't hurt to link them.
Asteconn 2 years ago
Very nice
froelich131 2 years ago
Nice tutorial!
PlanneCrash12000 2 years ago
Cool great tutorial,and thanks for the help! =D
partydude9999 2 years ago
Yay! First view! Great tutorial. :)
titanicguy1912 2 years ago