@FirearmPartiot At first I thought my laser went to crap bcuz it wasn't working when I wanted to use it. After I cleaned it, it started to work again. The problem was there was a lot of carbon build up on the BG. Again don't use Monarch ammo it really cause a lot of carbon build up and within the same 50 round box I had a total of 4 rounds that miss fired and jammed again. I won't be buying that anymore not even to practice. And why is the break down lever so hard to disassemble? Mmmmm...
@Voiz2Noiz When the BG380 first came out, they had problems with the takedown lever coming out while the weapon was being fired. This is why it is so tight I believe. I have not experienced any problems with the takedown lever on my BG380. It has over 600 rounds through it now.
@Firearm Patriot thanks for the info and I am looking for a holster for my 380 bodyguard. In fact, I shot my pistol today and its performance exceeded my expectation. I am no expert shooter, but the 15 yard distance was no problem. I focus on the C.N.S. area. Impressive results I got. Ok, I had three shots to the right forearm, but I knew my mistakes and corrected it. Oh by the way, stay away from Monarch ammo. I had a misfire followed by a jam. Winchester, Federal and Remington was fine.
@Voiz2Noiz Thanks for the information on the ammo. I would look at the DeSantis Nemesis for pocket carry as well. Very well constructed and sticks to your pocket well. Unfortunately, my BG380 is back at S&W due to the laser assembly backing out. It has been a frustrating problem. After about 500 rounds, I can shoot the BG about as good as any gun I own. It can be shot very accurate with practice.
I need to have my bodyguard sights rounded on the rear to remove the sharp edge, that is certainly an issue with the BG-380 that should be addressed by the owner or S&W, in my opinion
@FirearmPatriot Yes, it stays in my pocket , it has a almost sticky sort of material on the out side, i have had it for a while and i where it 24/7 in by back left pocket except when i sleep of cours .. good luck
have you tried ARMOR american? picked up several at our local gunshows the same guy is there at all shows i got 1 and it had a problem went to the next show and he made good on it he is a dealer and i got his address but you can call the company at 8003464545 but they seem to last well and a low price i have the first 1 for my ruger mk-III and it gets used a lot still looks great anyway good info from you
@rwb1955 I am not familar with ARMOR american. Do you know if the company has a website. I am always looking for good inexpensive holsters. Thanks for the info. I also have a Ruger Mark III. Probably one of my favorite guns to shoot. It is so accurate. Just so happens I was looking for a holster for it too.
Have you had any problems with the slide release on the TCP catching on the ribbon stitched around the blackhalk? New they work great but after they break in that reenforcement ribbon pops out just enough to hang up your weapon. I had to cut out about 1 inch of that ribbon so I could draw my TCP with out bringing the holster with it. Juts wondering if you are having the same issue with yours.
@BlackJack307 No problem with the TCP but the Bodyguard's rear sight will get caught on the ribbon sometimes. I will probably trim it down some to prevent this. I have been using the Blackhawk holster about everyday for the last 4 months.
@FirearmPatriot And by the way, thanks for the info...
Voiz2Noiz 1 month ago
@FirearmPartiot At first I thought my laser went to crap bcuz it wasn't working when I wanted to use it. After I cleaned it, it started to work again. The problem was there was a lot of carbon build up on the BG. Again don't use Monarch ammo it really cause a lot of carbon build up and within the same 50 round box I had a total of 4 rounds that miss fired and jammed again. I won't be buying that anymore not even to practice. And why is the break down lever so hard to disassemble? Mmmmm...
Voiz2Noiz 1 month ago
@Voiz2Noiz When the BG380 first came out, they had problems with the takedown lever coming out while the weapon was being fired. This is why it is so tight I believe. I have not experienced any problems with the takedown lever on my BG380. It has over 600 rounds through it now.
FirearmPatriot 1 month ago
@Firearm Patriot thanks for the info and I am looking for a holster for my 380 bodyguard. In fact, I shot my pistol today and its performance exceeded my expectation. I am no expert shooter, but the 15 yard distance was no problem. I focus on the C.N.S. area. Impressive results I got. Ok, I had three shots to the right forearm, but I knew my mistakes and corrected it. Oh by the way, stay away from Monarch ammo. I had a misfire followed by a jam. Winchester, Federal and Remington was fine.
Voiz2Noiz 1 month ago
@Voiz2Noiz Thanks for the information on the ammo. I would look at the DeSantis Nemesis for pocket carry as well. Very well constructed and sticks to your pocket well. Unfortunately, my BG380 is back at S&W due to the laser assembly backing out. It has been a frustrating problem. After about 500 rounds, I can shoot the BG about as good as any gun I own. It can be shot very accurate with practice.
FirearmPatriot 1 month ago
anyone else laugh everytime he said "hoester"?
pointshoot21 3 months ago
@pointshoot21 You must be from the Big City!
FirearmPatriot 3 months ago
I need to have my bodyguard sights rounded on the rear to remove the sharp edge, that is certainly an issue with the BG-380 that should be addressed by the owner or S&W, in my opinion
GeorgiaShooter 4 months ago
@GeorgiaShooter I agree that the rear sight is sharp and can present problems for drawing the Bodyguard especially from a pocket holster.
FirearmPatriot 4 months ago
I love the portrait of "Stonewall" in the background, very nice brother.
PokerJones1 4 months ago
i like the De Santis wallet holster. made in USA
securitygaurd81 8 months ago
@securitygaurd81 I have been looking at the De Santis wallet holster. Does it stay in you pocket secure when you draw it?
FirearmPatriot 8 months ago
@FirearmPatriot Yes, it stays in my pocket , it has a almost sticky sort of material on the out side, i have had it for a while and i where it 24/7 in by back left pocket except when i sleep of cours .. good luck
securitygaurd81 7 months ago
@FirearmPatriot it stays very well better that the blackhawlk!
techiehunter 2 months ago
Cool
RENOGUY777 9 months ago
looks like some good holsters for the money.
TheMinisterofDefence 9 months ago
have you tried ARMOR american? picked up several at our local gunshows the same guy is there at all shows i got 1 and it had a problem went to the next show and he made good on it he is a dealer and i got his address but you can call the company at 8003464545 but they seem to last well and a low price i have the first 1 for my ruger mk-III and it gets used a lot still looks great anyway good info from you
rwb1955 9 months ago
@rwb1955 I am not familar with ARMOR american. Do you know if the company has a website. I am always looking for good inexpensive holsters. Thanks for the info. I also have a Ruger Mark III. Probably one of my favorite guns to shoot. It is so accurate. Just so happens I was looking for a holster for it too.
FirearmPatriot 9 months ago
nice review
josephd27 9 months ago
Great video,, Very informative thx
StatenIslandPrepper 9 months ago
Thanks for the reply, like your reviews keep up the good work
BlackJack307 9 months ago
Have you had any problems with the slide release on the TCP catching on the ribbon stitched around the blackhalk? New they work great but after they break in that reenforcement ribbon pops out just enough to hang up your weapon. I had to cut out about 1 inch of that ribbon so I could draw my TCP with out bringing the holster with it. Juts wondering if you are having the same issue with yours.
BlackJack307 9 months ago
@BlackJack307 No problem with the TCP but the Bodyguard's rear sight will get caught on the ribbon sometimes. I will probably trim it down some to prevent this. I have been using the Blackhawk holster about everyday for the last 4 months.
FirearmPatriot 9 months ago
Nice video man.
badjeep02 9 months ago
Very good review and video.
unomas58 9 months ago
Good video
Thanks for the holster reviews!
MrColt45acp 9 months ago
thanks for the info buddy
ixVENGEFULxi 9 months ago
Thanks alot for this! Just got a new Bersa thunder, was looking for a new holster.
ShadeStalker1915 9 months ago
Nice video and information, thanks. Take care and have a great day.
ewtoutdoors 9 months ago
Here in Texas we can't seem to get any rain at all!
Great advise though have a great day!
ThexFatxMarathoner 9 months ago