FREE ENERGY CIRCUIT- HOW TO, PART 3/3

[Robots4Sale]

i like your work... but u have blaring music or noise in all of them lol

[5quarter]

this is useless with that crap radio playin .....E = M C fail

[rulesofethics]

cool,.. How about mica as cap? would it be measure by feet or inches?

would a thick ring of mica wrap 300 wraps of 28ga over it.. a ne-2 and 2 x150ohm work and show more stable power 240v to 600v then dump to ground rod.. and a battery block..

[INVENTOR3]

@rulesofethics Interesting,,,i will think about this,, thanks

[islandpilot100]

The background radiois OBNOXIOUS! Dude, turn your radio OFF

[fathershand]

Paul, good work!

Have you ever been fishing? The size of the fish you catch is directly proportional to the size of the bait that you use.

You're using small "bait" in trying to "catch" the large energy from the ether. Try using bigger bait!

I think that Tesla's design used a step-DOWN transformer to increase the amperage. He had to do that because his voltage was so high. Get higher voltage and try using a step-down transformer.

Don't give up. Persistence pays off!!

[INVENTOR3]

@fathershand Sorry, i missed this comment. I been looking into the step down transformers,,1 problem is it needs to be AC to induce secondary,,,or a good "pulsed" DC. Output of circuit is now DC. I will still get same power oputput, will only be a trade off,,,i still need more current. Im looking at coil configurations now from OU devises to maybe implement into the circuit, like the kepandanze coil thing out there. Or implement a rodin coil. Thanks for your inspiring words, Paul

[mark1952able]

Good Job Paul....

[Bright8888]

Thanks for the video. What about the end result? Are you getting enough voltage and current to charge your cellphone? When you shoot your next video, please ensure that the radio / TV is off. Thanks again.

[INVENTOR3]

@Bright8888 My best results were on video titled "free energy from air circuit part 16" watch?v=KS55btWqA80

And here is the last 2 video i made "free energy from air test" watch?v=Ia69Ow9DYLI &

"free energy from air test2" watch?v=vbEGITqU3_c

im working on charging a cell pone and a battery now, and no more radio :-) Thank you.

[electrofly23]

A) tripod

B) edit

C) use your meter to see what 4 .1uf caps in series is equivalent to vs 2 .2uf caps in series

[INVENTOR3]

@electrofly23 I bought a tripod,,,,,,dont want to edit yet(shows that there are no tricks),,,,,,,,yes, i was wrong with calculations with the caps, sorry bout that, my mistake..................thank­s for your comments

[Benjam23283]

will it work in rain or damp conditions?

[INVENTOR3]

@Benjam23283 Yes, same results, in rain or shine, night or day! :-)

[ieva211]

turn the radio off, what the hell are you doing making a video with the radio on so loud

[rasgrizzly]

liked the videos, wished you would have shown yours in action. How much Voltage are u getting?

[INVENTOR3]

@rasgrizzly 20 videos of it in action "free energy from air circuit" part 1 to 20

Got as much as 124V, and like 150 to 250 micro Amps

[nikolayzou]

What the fuck are you trying to achieve???

[INVENTOR3]

@nikolayzou REALLY! Maybe you have not watched the other videos, "free energy from air circuit part 1 to 20"

Collecting free useable energy from the air.

[nikolayzou]

@INVENTOR3 Great, I can power my tooth brush.

[969SobiasTokeS696]

@nikolayzou

see that word... Part ... emplies there are other PARTS to this video ....perhapes you should consider these things before swearing on Youtube, like an obnoxious cunt

[nikolayzou]

@969SobiasTokeS696 That's rude.

[DeSTruCT0MaCHiNe]

so does adding a ground cord change it that significantly, or do you think there's something else wrong?

sorry if this seems like a stupid question but im in high school and i never understood electricity that well..

[INVENTOR3]

@DeSTruCT0MaCHiNe No such thing as a dumb question in my book. Yes, ground made a big differance. It is important.

[DeSTruCT0MaCHiNe]

hey, love the videos and your work

trying this for the first time, i researched around the internet for the different circuit diagrams, and i first used one that's exactly like yours but it didn't mention having a ground cord.. so i ended up making a single circuit with a foot high antenna all mounted on a small peice of plywood to see if it worked, and it did, recording about 2.5-3.5 v, but after more fiddling i realized it was just responding to the amount of light around it,

[INVENTOR3]

@DeSTruCT0MaCHiNe These are good results with such a short antenna and no ground!!

Try longer antenna with a ground :-)

[bearpatch626]

@INVENTOR3 like a cb station antena.... XD

[INVENTOR3]

@bearpatch626 Just single magnet wire going from top of tall pole down on angle away from pole to the circuit.

CB station antenna would be good for the pole, to get the hight,,to connect the wire off of, but the wire would need to be insulated from the tower itself, using plastic or other insulator.

[pauliusyoutu8e]

everything is cool, but I do not understand why on earth you left TV or radio ruining in the background??? just for a sec imagine people has to watch this!!!! lI'll tel you a secret about a special button - with letters O F F on it. try it. if it will not shut it the noise take same brick or a pipe for that matter and keep hitting it till it goes off!!!

[INVENTOR3]

@pauliusyoutu8e I understand,,some like the radio, some dont. All my latest videos have no radio in back ground now. watch?v=qygkZozCtkw

[iwkeman]

xaxaxaxa

[bodziobran]

Please answer : for what frequency is that circuit adjusted ? how did you computed resonance frequency of those two 0.22uF caps ? what is the inductance of your antenna ?

[INVENTOR3]

@bodziobran i think i may have gotten lucky with close matching the coil to the antenna. I checked incoming frequency just on antenna alone, and it was like 265 or 285 Hz if i remember correctly,,it is shown on later videos. So i never did the math to purposly make the circuit resonate. Also i never checked the inductance of the antenna.

[gorgeousdzastr]

You could also put all of your eletronic components on a text box that way people can pause the video, and write them down, So you aren't spending so much time telling people what the specs are, and showing them the packages.

Seams like you have something here..

Keep it up !

[INVENTOR3]

@gorgeousdzastr Thank you, good idea!

[ronwire182]

hey i really need the circuit diagram can u please post it on here

[pauldude000]

Inventor3

Very interesting.

An idea for your attachment of the end of the antenna is a ham long wire antenna insulator. It electrically isolates the antenna from the attach point. You could use it with branches etc, then.

Ceramic insulators of any type should work as well.

Just a thought.

[INVENTOR3]

Hey, i like your name!

thanks for idea of insulators. I think this would work, but still having no bends to the antenna, but allowing to go across tree braches, but just insulators like they use on the tellaphone poles.

[VideoVegetable]

Great series! I bet you used energy from the air to run your Christmas lights... That's what I'd like to do someday when i get a chance to build things like this and add in a joule thief while I am at it. Going to let it do small jobs around the yard and in the house.

[INVENTOR3]

thanks for the compliment.

i bet you will build great things.

I have info for improved JT circuit that i want to add yet. Im working on those christmas lights, and radio, and refrigerator, you get the picture, :-)

[tegf4]

You need a video editor,

[INVENTOR3]

YES, absolutely. The one that came with the camera sucks!!

I can only clip off of one end or the other of video....not cut clips out from the middle!!!

[SlasherDM]

@INVENTOR3 you can allways stop the camera when ever you need to so that time when you want 2 set the camera down its not recording your knees its a waist of air time when your working in sort time frames

[INVENTOR3]

@SlasherDM yes , i will have to read the instruction for camera again, because i see no way to stop the camera without the camera making a new video when i start it back up,,,,no PAUSE button!!!! I cant figure it out,,must be a way to pause.....i will read again, thanks.

[24hosting]

Where are all the physic heads. Hey guys look... Free Energy.. Where are you guys... Come On...The laws of Physic Say So... What do they say?... Dam...Where are they when you need them... O.. Probably got there nose up that books binder... Look guys... Free ..O No.. I forgot about the $2 bucks. Thanks Inventor3 ..Gotta go find my critics..I'll be back.

[INVENTOR3]

i herd from most of them in part 1 and 2, hehehe. But yes there are guys from OU website and energy research groups. They all gave their 2 cents and are waiting on me to do more tests. This is a hard one to figure out, too many variables, and like Dr Moray, they dont know where the power is coming from???? But yes there are some interesting people following the vids.

Yes i would probly really get bombbarded if i brought this to OU forum. :-) heheheh, see u soon.

[EzekielWatchman1]

I haven't had time to watch all your videos but i'm just checking to see if you are aware that you are just in resonance with a AM radio transmitter from some location possibly within up to 300 miles from you. (or it could even be close power lines)

Ignore this comment if you are aware of this; if you disagree, direct me to which video explains why this is not the case.

[INVENTOR3]

Video 7

watch?v=XN_p1O7ESF8&feature=re­lated

powering a calculator and checking incoming frequency. It is above range of power lines and way below AM frequency band. My best results were on video 16.

thanks for the comments.

[DiyEcoProjects]

I love your work, its very inspiring. I will try and make something like this when ive finished off my other projects so thank you for all your hard work. Ive been following your channel.

But man, seriously its very difficult to follow what your saying with that radio so darn loud!! It made me feel ill after a while.

haha, regards & respect

[INVENTOR3]

Thank you.

Yes, i was wondering if the radio was to load...i did turn it down when i started recording...i also made sure to talk load. . hehhee

I will watch the volume next time.

good luck with your projects:-)