RC ADVENTURES - ENTER, PRiNCESS DEFENDER - "PD" - 90 LANDROVER SCALE 4X4

[dfawfzx]

dude can you do a short vid on how to trim the plastic/nylon links on the SCX10 TR for reducing that wheelbase to fit the D90 body? Thanks!

[jwlarkin01]

8:25-8:28 that's what she said

[jwlarkin01]

when you get a stab or slice in your finger you can super glue it works really good i have to do it all the time

[airsoft1uk]

4:14 to 4:17 that's what she said :)

[jwlarkin01]

@airsoft1uk funny

[smoothmove713]

Who sells the D90body on eday

[sanuksize45]

once i sliced my thumb with a cutter whille trimming a scale body. i peeled off the print so to say. it bleed a lot and i felt slowly passing out. i was lmao while it was happening.

[djmedic2008]

@sanuksize45 BAHAHAHA... Dude, i lmao'd when i read this. Thank you for the insight and funny visual. Sounds a lot like me. :)

[MonsterJoe2011]

8:34 "gonna pop it into princess defender" thats what she said

[MonsterJoe2011]

7:34 thats what she said

[Ekijol]

Dude you ever have problems with hangups on rocks using the shaft rings?

[BasiliskBoy]

Can you please do a vid on how to do the camo paint job on the body.and you rule

[CustomKidCda]

can you do a overkill vid

[northwestfourbyfour]

Overkill is in its own right what ever it wants to be, mostly killer of course

[multiperpose2010]

had to like it after he said something about slippin with a little wrench and stabbim your finger

[Graphicspittz187]

Great shot THX!

[BlackPhoenixTF2]

If Princess Defender is Pinky's sister will OverKill be your SCX10's brother??

[00whynot]

I have them collars on all my rigs. never had any problems with a drive shaft popping apart since.

[jdjcustoms]

dude your an rc god and pinky is the goddess lol



[wordreet]

You obviously have waaaayyyyyy, not enough time on your hands! ;¬)

[Saint42013]

hey medic can i have your junk drawer plz i think i could build a hole truck from it

[reptile411]

What are those collars on the drive line for? Did you say each side or sweet ride? HAHAHA Just giving you crap another thumbs up.

[z3lby90]

hey medic... to compare axial drive shaft + reinforce ring and compare with universal steel carbon drive shaft, which are better and more durable ?

[asw27x]

i run a 5955 not water proof and its fine and hitec i think made one

[RCSUPERDUDE]

do u need to waterproof the motor and esc?

[rcjackasss]

axail are bloody genius's, why cant traxxas make the same reinforcing rings for there bloody driveshafts which always pop out!!!

[skaterock1234]

@rcjackasss get mip shafts or don't buy traxxas shit

[thatssirforyou]

medic i've got a question. aren't there any alloy drive shafts available? or is the driveshaft actually ment to give in when being stressed so you won't destroy the gears in your diff?

[FakeSkillTeam]

How much bodies u got ?!?!? :o

[syncroG60golf]

Like the 'camo' paint job. Easy to make something with pink on it look silly. Hard to make it look cool.

Nice job.

[twistedsteelDK]

Another great medic film. Have you tried a set of punisher shafts from RC4WD? I had drive shaft issues when I put a brushless system in my AX10 put a set of punishers in no more trouble.

[Thekillertonss8000]

Did your axial wraith come with batters? Also how much did you pay for yours?

[HKSDRIFT]

Medic hitec does. 5655wp is the number

[FLASHSCOOTERTEAMAC]

hey dj. i always comment on your videos but i never get e comment back. but if you have a facebook page can i get the link because i cant find it

[BARAZINCLAROID]

Hey medic it's sk8te-penguin on your forum and I was wondering if those rings rub the u-joints at all under extreme angles? They look like they will cause extra binding...

[KyleGx1]

hey medic nice videos u been putting out i seen lol all most all of them or all.. n apart of forum but how do i get a bodie for my revo n rockcrawler that has rc sparks logo?

[maxflow8]

hey medic sell me your aquacraft if u may please reply

[TheMarschmallow]

the rings

[TheMarschmallow]

can you check if those fit on a slash 4x4 or a slash 2wd

[merrell89]

nice rig cant wait to see them all running

[MrDengo999]

medic can you post day by day updates since you moved i mean if you have time because i really wanna see videos day by day your cool peace out

[Sleytownmafia]

traxxas gives you a ujoint tool for driveshafts and its no problem or frustration to change

[madmatt9797]

one more thing along with that previous question. does any charger work with any battery?

[madmatt9797]

so im looking at the Axial SCX10 TR 4WD Rock Crawler Truck RTR on Rc4wd>com and it says it needs AA Batteries: Eight for transmitter

7.2V 6-cell Stick Battery Pack and Battery Charge

does that mean i choose either one? or is it telling me i have to get 8 AA batteries AND a 7.2v 6-cell battery pack?

[bradske45]

@madmatt9797 you need both 8 aa batteries and a 6 cell pack with compatible charger

[madmatt9797]

@bradske45 alright. and where would i put the 6 cell battery pack? do i just mount it up somewhere inside?

[bradske45]

@madmatt9797 theres a tray that it fits in

[MXRac3r545]

@madmatt9797 u need both AA and 6 or 7 cell Battery

[idiotparade1]

LOL @djmedic2008 think about it XDD tight and so it want slide out XDDDDDDD LOL

[mxkid97]

I always get so excited when u post a new video. I luv rc.

[ruydobauch]

Are there any differences between the SCX10 Dingo and Honcho other than the bodies?

[MrTenere13]

Hey, everytime i see in mail mailbox a new video it makes my day good

[im2tall1]

Medic's cool cool !!I don't even need the tips I just like the videos,it's strange when you watch stuff you already know just because of the presentation!! You have great way of capturing peoples attention !!Good Job !!!And I would like to suggest doing a monster truck for the other portion of us solid axle guys! That would be cool!!

[TEAMBLACKCOUNTRY]

warm water works well to make the shafts a bit more supple ...i wouldnt recommend bending them myself as im a bit over eager sometimes :)

another nice vid man!!

[RcNickster]

great vid bud...always enjoy them...thanks

[junixsk8]

Medic, again, congratulations! love.your vids.The whole live thing makes you sound more humble. i appreciate it. keep up with the good work "ei"!?!

[TheAriel256]

I'm the 1000 viewer!

great vids medic!

[Timberwolf35546]

I know ive said it hundreds of times, but i really enjoy your vids..

[supersonicPANTS]

dj im getting my tamyia truck still dont know wich one but were can i get waterproof motors or how to water proof them and if i ever mess anything up like a dumbass hopfuly i can count on you for advice by the way im 13



[rcbuggyracingya]

keep going whit ur videos! i love all of them!

[TheKennyKiller]

I was wondering if you put the support rings on the other way around can you screw the grub screws on to the pin ??? just wondering

[evienable]

SO many questions Medic :P

[620ILoveSoccer620]

WOO I GOT THE 1001 VIEW XD!!!!!!!!!

[3brosRCSam]

8:14 haha i've stabbed my self several times like that....although one time i was just plain dumb. i was at school and i thought that the cap was on the ball point of my pen when in fact it was on the other end. i was looking at the teacher paying attention to the lesson and i slammed my palm down ya' know making the cap more secure but my hand landed on the ball point of my pen instead, that was a bit of a shock!

[matttherat12069]

hitec has a water proof servos HS-5646WP High Voltage, High Torque, Programmable Digital Waterproof Servo

[n3qdz]

For taxi fans out there "wwwwwhhhhhhaaaaatttt doeeessss the yyyyyeeelllllllloooooowwwww light mean!"

[THE1BRUCEBRUCE]

8:35 that what she said

[freemarlochip]

You do know they sell a tool to install them and you wont need to bend anything with plyers and risk breaking them HEY Medic....

[vaultstory]

Medic they do have a tool to put those on ,not sure which kit it came with but it works well. even makes it easy to remove them.

[mikesamc]

no metal driveshafts made for the scx yet?

[correa825]

Hitec is making a servo called hs-646wp servo and its waterproof

[SeniorWinn]

Hopefully these are coming:

hitecrcd.com/products/new-prod­ucts/hs-5646wp.html

hitecrcd.com/products/new-prod­ucts/hs-646wp.html

[carlimuti]

Hey i have a question i got a TRaxxas Slash 4WD 1/16 (You can see it on my channel) The gearing dose it have to bee protected? i have upgraded to a 1/10 scale Brushless motor & esc? Please reply.

[248Samson]

@carlimuti no

[carlimuti]

@248Samson Okay Thanks xD I was just thinking about dirt getting in there But thank you a lot :D

[248Samson]

@carlimuti ya you'll get an occasional pebble in there and will have to pick em out youll see what i mean.

[carlimuti]

@248Samson Okay Thanks xD I was just thinking about dirt getting in there But thank you a lot :D

[liighthead]

haha i have the same ikea plyers

ever thought with the servos that they just waterproof the PCB? so plastic carnt rust ect? not sure how they look inside

[Myglowplug]

stabing your fingers suck drilling into them sucks wores !

[671solo]

Definitely session 101 thanks medic!! I learn something new every time!! Big ups bro keep it up!!

[braco222]

Hitec is coming out with waterproof servos ;)

[badintentionsrc]

paint job looks sweet u mentiond a tutorial on camo painting i looked back at 1 of your old build vids of the xtm super you did 2 years ago and it shows u doing the same effect on that as the defender is it more or less the same process u used on both ur camo defenders

[killerwolf84]

how hard is it to water proof an rc



[TheKillerBaja]

Hey medic , whats your take on the Venom Creeper kits, would like to get into the crawler now from watching your great vids.. KEEP UP THE GREAT WORK EH!!!!

[SamuelFletcher]

Hitech does have one . its for robots but will work in rc

[solunasunrise]

hey medic ... why does it heve to be a traxxas servo ? anything else will also do the job ... as long its quality work and i guess water resiitant as you want to .... i know traxxas sounds cool with the name .. but they just drain peoples pocket .... like any random bigger company today does ...

[gmummy]

Yo Medic, what happened to the X-Crawler..?

[VideosForFun1000]

Sick stuff

[themfknightrider420]

hey medic hitec has came out with water proof servos there in the issus of rc car acticon october..

[adidasoccer284]

Hey medic! What is a good truck to build I have been in rc for about 4 years but I have never built one before ps: u rock

[hammell557]

hey medic good thing buidling another rig for the wify tryin to stay outa the dog house are we?

ps. idea for project overkill's plow just use a simple triangle type disign for the plow mount just hanging down off the frame infront of the front axle!, since a triangle is really strong to

[rcnightmare]

Nice, Thumbs up city, you know we all love the Medic "raw"!!!!

[grizzly2008j]

do think traxxas is going to make a rock crawler

[artardFTW]

@grizzly2008j wasnt the summit supposed to be a crawler?

[LeMieux250]

@grizzly2008j if they do, itll probably be a stampede with a different body :P

[myrcrevo1]

@grizzly2008j i really dont thank they can figer it out it like the traxxas monster trucks they need to be 4WD not 2WD

[pope350]

8:20 thought u didn't swear??

[morg9900]

careful it might bite you... no srsly it will

[andrewupsidedown]

Lol I feel u on the driveshafts if they arent twisting than the ends break and constantly pop off lol uugg o we'll they are a cheap weak point so screw it! And the new studio is lookin good

[MegaRallycar]

Im loving these constant 5min+ videos. Keep going hehe no you can take a break but i hope to see another video tomorrow

[Dribble83]

Nice to see the bit of tutorial that you are doing. People need them thats for sure. Wicked paint job on the body, I saw that body for sale and jaw dropped when I saw the price hahaha guessing you air brush the hard body....video on doing one yup for sure would be MEPIC!

[YoCzechYourself]

Lol needed a band aid? Paper towel and beer works better :D

[The360rcguy]

Nice paint job....i suck at painting!

[RCkiller86]

put the MIPs driveshafts on it.....

[mynameis63]

really like your channel bro..one lil suggestion..there is a crappy little tool that comes with all Traxxas stuff..thin slotted tool..works perfect for this. no bending of the yoke halves.

[honda30022]

Hitec , has got a water proof servo's in the works . They are available now .

[UrbanSportGuy]

Hitec has released a few waterproof servos, Medic. Look it up.

[CatamanGMF]

Awesome medic.

Jem is a very lucky woman.

[sdc081983]

I love watching your videos man Keep up the great work. Kind of off the subject but I was looking for a somewhat cheap esc. What's your opinion on the Tazer brand esc's ? Are they dependable or long lasting? Just let me know your thoughts and if you have ever had one or if you know of any other decent esc's. Thanks Man.

[STEELHORSE1975]

hey medic can i give a tip soak the drive shaft in hot water works great

[N4161X]

man MeDiC sometimes at school [i go to private school] i pray for a video of yours to show up in my subscription box well done i love RC

[kiddrockkyoya2001]

@N4161X SAMEEE

[kiddrockkyoya2001]

I want more running videos !!!!!!!!!!!!!

[quadguy112895]

3 videos in one day?! good gosh medic!

[UthnthGfdtk]

круто!



[KTMBOY1112]

All i can say is AWESOME!!

[portalex007]

ohh finally 3rd i guess

[TopFuelProductions]

Second! And thumbs upped! :) Pretty sweet man

[djmedic2008]

OH YEAH! FIRST! THUMBS UP FOR PRINCESS DEFENDER!

[TheTopper68]

@djmedic2008 hitec make waterproof servos now