AR-15 Magpul CTR, XTM, ASAP, Accupoint, Noveske Can Break Review

[HockeyandEF9]

Nice build!



[arwel63]

please excuse my ignorance I am ex british forces but why would you by such an assault weapon for a hobby what excactly is the hobby surly you would'nt use this type of weapon for hunting just asking before the onslaught of abuse starts.

[315mulder]

@arwel63 It is a mistake to assume what people do with thier effects. Obviously this particular weapon isnt setup for hunting. However I do appreciate your interest and your view.

[arwel63]

@315mulder As I asked my friend what hobby would you use that kind of weapon for ,I did not once  assume what you were doing with it thanks again for your reply .

[Paintbl99]

@arwel63 Yea his reply wasn't very helpful. As an AR-15 owner myself I use it primarily for target shooting. In some states in the US you can go out in the National Forests and set up targets or just go to locally owned indoor or outdoor shooting ranges.  Many people in the US also have these weapons for preparedness reasons (similar to how Swiss households have State mandated assault weapons in case of national emergency) and for home protection. Just some reasons why some people own these.

[ultimatehunter101]

How's that 10'5 inch barrel?

[315mulder]

@ultimatehunter101 It was fine up until I sold it a few months ago. I know have a 12.5 DD Lite on it. :)

[cory07ink]

Sick brother

[schembrilllllll]

sooooo sick

[jabooper]

sorry if this is a stupid question but it's real, right? i've recently been looking for videos of real guns and i've come across a bunch of airsoft stuff.

[315mulder]

@jabooper Not a stupid question, yes its as real as they come.

[jabooper]

@315mulder alright awesome! thanks for responding so soon

[culum]

why did you get rid of the accupoint? 

[315mulder]

@culum For several reasons but, i am happy with the Aimpoint Micro

[culum]

@315mulder

the reason im asking is cause i am seriously considering the tr24 for my lmt cqb mrp. the 1-4x magnification option seems very appealing. could you please elaborate on your decision to dump this optic?

[nerfboy98]

nice ar bro!

[Grawr93XD]

sweet gun bro, kinda iffy about the rear flip up sites being so close to the scope, but a great gun in general.

can you chamber in 6.8 if you changed the kit?

[shaynethetrain]

What kind of suppresser you running? looks great

[Tuxedo413]

I run a stag arms model 8 with a DD pistion omega rail, Aimpoint comp ml2, and magpul mags, stock, and grip

[smokybob63]

Very nice weapon. why didnt you speak?

[BORN2LOSE13]

What rail hand guard is that?

[315mulder]

@BORN2LOSE13 It's the Daniel Defense Lite Rail 9.0

[DarthSmittius]

How do you like the Accupoint? Can you see the BUIS through the tube?

[315mulder]

@DarthSmittius I no longer have the Accupoint but I loved it when I had it. No, you can't see the front signt when looking through the Accupoint.

[aProudNRAMember]

@P0wnedChicken321 The shorter barrel "reportedly" does not affect accuracy, but muzzle velocity. IDK for sure.

[aProudNRAMember]

Whoa man. Whats the thing that the weapon was placed on. Looks interesting, something about glock?

[315mulder]

@aProudNRAMember It's a GLOCK Armouror's Mat, $15 on Ebay

[NIKON777]

beautiful setup

[141Spectre]

hello whats that thing around ur mag area, looks like a kind of grip? where cani get one just like that?

[2390mac]

Tacticool!

[redcky12]

I Freakin love your gun man!!!!

[strykersigma]

nice rifle, how do you like the accupoint?

[echo1er]

dang... boner potrol! Its like rifle porn.

Noveske Can Break did you pick that up at a store or website?

[mrurmom911]

that gun is beautiful

[AMissfiredGun]

what kind of pistol grip is that? what color is it?

[315mulder]

@AMissfiredGun Thats when I had the Falcon Ergo Grip in OD. They are very nice grips. Molded for left or right handed shooters. Very comfortable and the backstrap is nice and high with an overall, slim profile. It has a compartment for storage under the baseplate. You cant go wrong with it.

[AMissfiredGun]

@AMissfiredGun its made by tan retard? loljk

[IBallistaphobia]

SBR? If so how long did your paperwork take? I'm thinking of SBR'n an MP5 clone.

[315mulder]

@IBallistaphobia Yes its an SBR, it took around 3 months to get my stamp a year and a half-two years ago. Im not sure what the current turn around time is.

[IBallistaphobia]

@315mulder Cool, thanks for the quick reply. Beautiful rifle BTW!

[315mulder]

@IBallistaphobia Thanks

[james1375446]

that's hott

[crazyALICEGINNY]

haha colored sights, ur the man. Are they metal or some type of plastic?

[315mulder]

@crazyALICEGINNY Thanks, they are Magpul's MBUS flip up sights. Very nice!

[dkdoodful]

*tactical boner* i was thinking between a rock river... spikes tactical.. and smith and wesson M&Ps AR15's ' but i think this noveske could prob make the rest look silly at the range. have you ever tested the MOA on this? i heard u can easily get sub MOA.

[AK74UXDDDD]

is this a real gun?

[315mulder]

@AK74UXDDDD Si senior

[AK74UXDDDD]

@315mulder fuck man thats lucky!!!!!...... SWEET>

[NinjaDKDavid]

I thought it was an airsoft gun... LOL but awesome gun dude. I'm definitely going to buy an AR-15 when I'm old enough. For now it's airsoft. XD

[outlawedtoker]

@NinjaDKDavid airsoft is the only way your going to get close to using one of these to have a cqb style battle outside of a war zone, at least legally.

so yea, airsoft is for all ages my friend. its good stuff.

[001jbear]

Sweet set up man. It's hard to find a sexy AR these days.

[XshadowthekilllaX]

what kind of scope is that



[XshadowthekilllaX]

lucky 

[thegingerbreadman]

nice

[badassrover]

holy shit that thing is SWEEEEEET i have a ruger sr-556 i hope to make it look like that

[315mulder]

@badassrover Hey thanks alot man, I appreciate your positive feedback and look forward to you posting yours when you complete it.

[RetaliationAirsoft]

aoeirjoiegjdasmfljahgdwyhuwqda­hujsdhayvfdbw Sorry wipping the jizz off my keyboard.....

[315mulder]

@RetaliationAirsoft HAHAHA!!

[Wurst360]

thats pretty badass

[315mulder]

@Wurst360 Thanks for the comment, too bad it doesnt look like this anymore. Checkout my other video on my rifle, its more recent.

[Spelunker0211]

Do those scopes work like red dots? Meaning you could have the "post" off to the left but still on your target and it would hit?

[marchubkyle]

thats a pretty interesting scope

[starsairsoft101]

Do you have to have a special body to put the moe pistol grip on?

[315mulder]

@starsairsoft101 Im not sure I understand your question. This is real firearm, not an Airsoft. There was no special equiptment needed to install the grip. I hope this answers your question.

[starsairsoft101]

@315mulder Thanks, it was a bad question I figured it out like 3 minutes later

[DeltaNovemberLima213]

@starsairsoft101 There is no MOE grip anywhere...

[Garuda1337]

@starsairsoft101 Fucking airsofters can kiss my ass. Leave the real guns to the men. Go back to playing with your plastic toys.

[M4CARBINE556]

How long did it take to get your NFA paper work back?

[315mulder]

@M4CARBINE556 It took about 4 months to get my BFA paperwork back. But it was over a year ago. Im not sure wht the turn around time is now.

[luminorguy]

That is one fine shootin' iron you got there! Thanks for posting!

[strykersigma]

how did you like the grip for the mag well?

[315mulder]

@strykersigma I really liked it alot but I have since changed my grip to the Magpul AFG and use it 100% of the time. However, if you prefer to shoot holding the magwell then I highly recomend it. The grip itself is great!

[DevilsMachine]

wow i would want one of those :p

[315mulder]

I am selling the 10.25'' barrel and Noveske Can Break if anyone is interested.

[XxNickSSxX44]

WOW is all i can say...the scope reticle looks pretty damn cool the gun itself is very nice..currently i have a standard stag arms ar15..i want to build on it but im short on money but hows the gun holding up for you

[315mulder]

@XxNickSSxX44 Thanks for your comments. Its holding up just fine. It looks a little different at the moment. I'll do an updated video on it later.

[saddy78]

I'm jealous! I want a shorter barrel for mine and I like the Noveske Flash Supressor.

Nice AR!

[315mulder]

@saddy78 Interesting that you would say that. I am actually selling my barrel with the Noveske break. Let me know if interested.

[CrI5PyCrAcK3R]

Wat scope mount is that?

[315mulder]

@CrI5PyCrAcK3R It the American Defense retails for around $99 if I rember correctly. Visit their website

[315mulder]

@Bumling I'm not sure why your comment was removed, I guess youtube removed it but not sure why. Anyway, the Noveske Break is pretty good. I like it alot, it sticks out a bit but I can notice a real difference when I shoot it. I recomend one if your thinking about getting one. Thanks and Happy Shooting!

I

[mercturd85]

your ar is magpimped out

[315mulder]

@mercturd85 Yea, Magpul makes some great weapon accessories! Love'em

[leogecko22]

that gun is sexy

[315mulder]

@leogecko22 Thanks alot, I appreciate the comment.

[MaddDawg42]

sweet set up I got somewhat of the same but its a M&P lower with a RRA A4 upper and 16" light government profile barrel and a magpul pistol grip I love the daniel defense rail. but I was wondering can you use the magpul BUS's simultaneously with the accupoint mounted, so long as the magnification is turned down?

[315mulder]

@MaddDawg42 Yes you can use the MBUS with the magnification set to 1.25-4x without any problem. Its difficult to explain but yes it works fine. Good question!

[3mealsaday]

damn, out of all that magpul stuff you couldnt settle for a MIAD? lol. By the way, stags are a killer rifle. I have had mine for about three years now.

[315mulder]

@3mealsaday Actually I am ordering one soon. :)

[3mealsaday]

@315mulder MIAD's sold me on grips. I even custom fitted one to work on an AK. I love them.

[julioboi1]

whats the thing on the metal body called

[315mulder]

@julioboi1 If your refering to the grip on the magwell, its a Never Quit Grip. They sell for $20 and are worth it if you prefer to grip the magwell when you shoot.

[hahnrock]

is that the dark earth and OD magpul XTM rail covers? and i wanted to ask u guys on will a tan rail look better on this setup?

[315mulder]

@hahnrock Hi, yes I have both OD Green and Dark Earth XTM rail covers on. It is a personal preference and depends on what type of look you are going for.

[guitaristsniper123]

how much and where did you get the stock

[315mulder]

@guitaristsniper123 The stock is a Magpul CTR stock, I purchased it locally for around $100. Worth every cent

[painfull94]

sick tan rifle haha

[315mulder]

@painfull94 Thanks dude!

[Gingo4564]

Wow that's wicked nice rig. Which scope is that? It's a Trijicon right?

[315mulder]

@Gingo4564 Yea its the Trijicon Accupoint

[Garuda1337]

ooo thats purdy

[wojoman676]

i am thimking about getting an accupoint. what is your opinion on it?

[315mulder]

@wojoman676 Alot to consider, depends on how you are going to set up your rifle. I personally like the scope and it works well for my use.

[hahnrock]

will the neverquit grip work on an airsoft m4 model? And is there an airsoft version of the TangoDown Short Battle Grip? Thanks!

[Ronald3570]

@hahnrock it will only work if you're able to remove the triggerguard on your airsoft gun.

[315mulder]

@hahnrock Yea the grip will work on Airsoft M4 and yes there is a Airsoft verion of the Tango Down Grip, just check ebay they are around $15-$20. Mine happens to be legit.

[leviathan556]

How are you liking that NeverQuit Grip? Do you consider it as a good accessory?

[315mulder]

@leviathan556 My personal opinion is, Its great! I find myself shooting from the magwell most of the time and the NeverQuit Grip makes it alot more comfortable to hold. Something to note: The Magpul BAD Lever and the NeverQuite Grip cant work together. The Bad lever will hang on the Grip so, its one or the other for me. Hope this helps some. Happy Shooting!

[fearsrampage1313]

@315mulder thats a sexy carbine how much were all the mods? anyway i sub.

[315mulder]

@fearsrampage1313 Geez, I cant count that high. It wasnt cheap, I made the modifications a little at a time.

[315mulder]

@leviathan556 Yes it works well for me. Thanks for the question.

[NIKON777]

Great build, we have a lot of the same parts. Check out my AR videos.

[solidmagp1e]

mate. a beast of a gun!!! lovin the mixed tan n black!!

[315mulder]

@solidmagp1e Gracias Amigo

[RaptorBandit]

i have a stag model two and was wondering if the buffer tube is mill spec or standard. wanting a new stock and not sure which size.

[315mulder]

It's mil spec

[315mulder]

@RaptorBandit Mil Spec

[OzzbonerProductions]

what length rail is that?

[315mulder]

9'' Daniel Defense Omega Lite Rail with Magpul XTM Rail Covers.

[iluvmym4]

Dude thats way 2 bad ass! your making my AR look bad!

[315mulder]

Thanks alot, I appreciate the positive feedback.

[315mulder]

Its a NeverQuite grip, it can be purchased for $20 online. I highly recomend one if you shoot holding the magwell.

[enscribe]

what's that thing on the mag well?

[315mulder]

Thanks, this is just a test video really. I'll post another video to explain all accessories. Not sure off the top of my head how much total everything was. I resold the old parts and paid the difference.

[brandoncormac]

very nice how much?

[samGproductions]

quite a bit..lol