i mean for the money new, this boat would be your best bet. but im not going to dish out 40$ i would rather buy a used stroker with a 300 horsepower, they are the fastest, biggest, toughest boats on the water, hand built i have one 94' with a 225 evinrude. with a full livewell, 2 200 pound people, barely any gas i have got it up to 92mph and i have seen peopl with a 300 get up to 109mph! stroker all the way
Someone that has ridden in a NitroZ9 and a Ranger Z520 let me know what the difference in the ride is. I like the floorplan of the Nitro and the boxes better than my Ranger. However Im a bit scared that the Nitro wont handle rough water like my Ranger. Though the Nitro is definitely heavy enough. Someone send me a message that has rode in both and let me know what you think.
i had a ranger and sold it and decided to try the z-8, the worst mistake i ever made in my life, the ride in the z-8 will absolutely jar your teeth out in rough water.
bass pro shop usually runs some pretty decent specials, otherwise youre better off trying to just find a pretty good used one for a lot less. just make sure its in good shape though, not needing a bunch of work, check the bottom for cracks or chips, also the sides, also look inside EVERY compartment of the boat and look for cracking, peeling, or chips, this may be signs of problems or accidents, damage, etc. should start easily too. also inspect the trailer and tires/axles and the crank.
nitro is a great boat but the hulls r shit, i tell ya i know i guy who went on 2 foot rollers with his and cracked the hull, then he went to a ranger, i tell ya the hulls r not made for rouph water
u guys have to be kiding me! seriously u have to know that nitro is one of the cheapest made over priced boats on the market! can u say mass produced! corner cutting son of guns
LOL he carries an extra trolling motor, he also uses the 101 ft. lb. thrust trolling motor not the 82 ft. lb. one those are like $1500 and he has 2 but its not like it matters to him he gets paid to use them and really how many people carry like 40 rods in their boat at one time, I can see 15-20 but 40 is just extra weight
How about if you just put on a pain of jeans, a t shirt and get in your 14 foot Alumacraft with a 15 hrs. and go have a good time fishing and enjoying nature instead of dressing like a clown and being a yuppie goof ball.
i mean for the money new, this boat would be your best bet. but im not going to dish out 40$ i would rather buy a used stroker with a 300 horsepower, they are the fastest, biggest, toughest boats on the water, hand built i have one 94' with a 225 evinrude. with a full livewell, 2 200 pound people, barely any gas i have got it up to 92mph and i have seen peopl with a 300 get up to 109mph! stroker all the way
CrOwNeDhalOchamp 2 weeks ago
is kvd actully useing a soft plastic at 1:57 lol thats a first
bassinflorida 3 months ago
Nitro sucks! Ranger,stratos,bass cat, triton, and legend are the way to go!
headstrong440 5 months ago
KVD smokes Marlboro Lights 4:09
xb21BASS 6 months ago
sure wish i had 30k to have a trash can in my tourny boat...
beck125 8 months ago
take your over priced ranger name and your little computer dash and beat it, they wete tanks 20 yrs ago and there still tanks haha RANGERS lmao
jr96663 10 months ago
i love the fast he just drops the rod dosent even care hahah
WheatThins1 11 months ago
Someone that has ridden in a NitroZ9 and a Ranger Z520 let me know what the difference in the ride is. I like the floorplan of the Nitro and the boxes better than my Ranger. However Im a bit scared that the Nitro wont handle rough water like my Ranger. Though the Nitro is definitely heavy enough. Someone send me a message that has rode in both and let me know what you think.
hellyeah2299 11 months ago
i had a ranger and sold it and decided to try the z-8, the worst mistake i ever made in my life, the ride in the z-8 will absolutely jar your teeth out in rough water.
bigbassbert 11 months ago
Lol i just got this boat 3 weeks ago its sick I love it!!
bassinflorida 11 months ago
i got it and it coated cheap in bass pro shops
datguy414 1 year ago
50k for a new here in canada
canadiantowman 1 year ago
@AAav8or 621vs my damn DREAM boat it's the best of both worlds but for now I'll enjoy my old skeeter thats paid for!!!
jekyllhyderacing 1 year ago
there this guy burnt his boat
cjj822000 1 year ago
I couldnt even offord the gass to drive it
pyxiefrog124 1 year ago
bass pro shop usually runs some pretty decent specials, otherwise youre better off trying to just find a pretty good used one for a lot less. just make sure its in good shape though, not needing a bunch of work, check the bottom for cracks or chips, also the sides, also look inside EVERY compartment of the boat and look for cracking, peeling, or chips, this may be signs of problems or accidents, damage, etc. should start easily too. also inspect the trailer and tires/axles and the crank.
rcrocker02 2 years ago
can the nitro boats go in rivers because the nitro boats look small and id like to know if they can survive in current
pp2211 2 years ago
theyll do pretty good in rivers, they can handle almost any conditions, theyre tough and versatile.
rcrocker02 2 years ago
I couldnt even pay for the gas I'll stick with a jon boat
pyxiefrog124 2 years ago
Thats not ture if the boat cost 39k used.... and 40k new i'd pay 40k new.... nothing holds it value except maybe realestate, in a good market
MrBuckeyeater 2 years ago 4
Comment removed
rangerbass519 2 years ago
There's only one type of desgin nitro does have that ranger, triton and all of the other boats don't have and that is the Center Dual Console desgin.
HighJacker99 2 years ago
Comment removed
rangerbass519 2 years ago
u do have a point that is why i went with the z521
HighJacker99 2 years ago
50g that is a little over priced you think?lol
topwaterpros 2 years ago
Comment removed
rangerbass519 2 years ago
nitro is a great boat but the hulls r shit, i tell ya i know i guy who went on 2 foot rollers with his and cracked the hull, then he went to a ranger, i tell ya the hulls r not made for rouph water
fortaaron 2 years ago
u guys have to be kiding me! seriously u have to know that nitro is one of the cheapest made over priced boats on the market! can u say mass produced! corner cutting son of guns
dupobasscat 2 years ago
Lund? they don't even make bass boats!
rangerbass519 2 years ago
eh i have seen bass cat's out do these thing by over 60 mph bass cats are power bass boats bassicly they rock!
SkyHawk024 2 years ago
lol this guy dosnt know how to take care of a boat look at that waterline thats just horible
WheatThins1 2 years ago
Piece of junk buy a ranger.
rangerbass519 2 years ago
Amen Man
rangerbass519 2 years ago
LOL he carries an extra trolling motor, he also uses the 101 ft. lb. thrust trolling motor not the 82 ft. lb. one those are like $1500 and he has 2 but its not like it matters to him he gets paid to use them and really how many people carry like 40 rods in their boat at one time, I can see 15-20 but 40 is just extra weight
xSPORTSMAN1993x 2 years ago
kvd, is the tiger woods of fishing I got to meet him at the battle on the boreder at lake amsistad texas, he is the coolest guy to talk too,
work hard fish harder kris
krismoore1984 2 years ago
How about if you just put on a pain of jeans, a t shirt and get in your 14 foot Alumacraft with a 15 hrs. and go have a good time fishing and enjoying nature instead of dressing like a clown and being a yuppie goof ball.
NBaimf 2 years ago
Sorry but I have a better time in my ranger then I did in my 14 ft alumacraft. But to each is own.
rangerbass519 2 years ago
5ft waves? my arse
non the less best fisherman
unitaper 3 years ago
Bela bassboats, tenho uma fabricada no brasil , esta a anos luz da nitro.
mpilia 4 years ago