Upgraded G&G GR-16 A3 AEG Review

[NITECOREPD]

even in stock form this gun is so fuckin beast

[tashi11253]

nice review, could you fit a magpul 9 inch hand guard to the front instead of the ordinary handguard?

[airsoftrocky]

@tashi11253 my first guess would say yes, but I think it really depends on the delta ring, the magpul stuff can only run with a certain d-ring, i think called a "mil-spec" delta ring

[tashi11253]

@airsoftrocky  how long is the ordinary handguard?

[airsoftrocky]

@tashi11253 not sure but it is normal "m16" length, whatever that is.

[OneWithGuns93]

Can I use a 9.6v 3800 mAh battery on the gun with stock internals or am I going to need to upgrade some before I can use that much mAh?

[airsoftrocky]

@OneWithGuns93 you should be fine for awhile with stock internals... eventually you want to upgrade

[benky96]

can you change the stock and if so what kind

[airsoftrocky]

@benky96 if you want to put an adjustable stock on it you'd have to buy a buffer tube as well... it's a fairly easy install

[badboyw1]

where did you buy the hand grip rail. i need one because i need a bipod. its so accurate i decided to use it as a sniper/assault weapon.do you also know where i can buy a snier style scope or aleast a mid/long range scope.

[kokopelliman66]

where did you buy the gun?

[airsoftrocky]

@kokopelliman66 please read the description people... EVIKE.COM

[jsbroadcasts]

press 6 repeatedly to get a seizure

[biohazardrush]

if i put a 120m spring in my G&G gun do i need a torque upgrade and piston? or will it be fine. PLEASE REPLY

[airsoftrocky]

@biohazardrush it will be fine but will have increased wear and tear so upgrades are always encouraged

[tithoking1]

Good job really good gun and video!

[xLycosax]

DKASDKASDKASDK

[Q0A9]

Very good Video but in your Next softgun Video pleas Show how it shoot's

[TeamNAID]

Hey man. I've heard many times that there is some wobble with the magazine. Did you buy any extra mags for the gun? If so, what kind did you get, and did they still wobble?

[airsoftrocky]

@TeamNAID yeah they do have a bit of wobble in the mag. However that didn't really phase me too much... it wasn't enough to give away my position, but i've heard the best technique is to wrap ur mags with tape... that'll do the trick... thanks for the comment

[TheCrazyTman]

You got a little bit wrong. The plastic is nylon fiber. Like the real deal.

[airsoftrocky]

@TheCrazyTman did you see the annotation?

[TheCrazyTman]

@airsoftrocky annotation. im just saying the thing has the same plastic as the real m16

[airsoftrocky]

@TheCrazyTman yeah

[anthonybigdawgs]

what is the maximum range you can shoot somebody at without aiming your gun up in the air over your targets head.

[airsoftrocky]

@anthonybigdawgs i'd say about 200 ft or so... maybe more

[TheZandy20]

im sorry but your review was not that good. You said u have a gr16 gearbox . Does that mean that u have blowback or forward assist. Please make that clear because all that u talked about was your rail and things u put on the gun. Nice gun tho :)

[airsoftrocky]

@TheZandy20 i actually covered the gun completely and what i meant is an m4/m16 gearbox

[sgtshoeman]

mag wobble seems to be on every g&g cuz my g&g gr16 r4 commando has a wobble in the mag well

[derfuher00]

try puting electical tape around the top of the mag ( about 2 inch below the top) keep putting tape around it untill it fits good into the mag well

[gmfr34k]

Where did you bought the underhandguard rail?? reply pls

[maika0staretza]

hey is that 509 mm lengh the original lengh? cuz i put a 509 ,6.04 on my m4 and it don't work that well

[airsoftrocky]

@maika0staretza 509mm is the original length, and the reason it didn't work so well is that, that length is only for m16, for it to work on an m4 ud need to add a suppressor

[blindMAN219]

@maika0staretza the original length of M4's is 363mm, a lot shorter than M16's

[StormHornet56]

Hello!

I just ordered a new m16 a3 from airsplat, and i was wondering if i could send you the link and you could send me a few back on compatible batteries.

[r2323r23]

@StormHornet56 depends if it has a full stock. like all m16 a3 do. it will take a large type battery and id highly reccomend all battery because they have the cheapest prices by far. large connector. but if you want you can buy nunchuck or small type and just buy a adaptor small to large

[StormHornet56]

hello! u just ordered a new airsoft gun from airsplat. I was wondering if I could send you a link and you could send me back some links of batteries and chargers. I work with real guns, not airsoft guns, so this isnt my point of expertise.

[airsoftown18]

hey bro great video i am subscribing! and all around how much was the gun overall with the upgrades and accesories

[superguyperson]

does it come with a battery? and what is the bore dimensions of the stock barrel?

[airsoftrocky]

@superguyperson no it does not come with a battery but I would recommend a large type 8.4v or 9.6v.

Bore Dimensions are: 6.03 510mm barrel

[superguyperson]

@airsoftrocky thanks alot!

[Chawwwwwley]

@airsoftrocky actually the stock bore is 6.04 which is so much better than a 6.03 because there is almost no change in accuracy, and you don't need to do as much work on it

[The12345minione]

I was thinking of buying the G&G gr16 m4 carbine full metal and i was wondering if it is a reliable gun and do you recommend it.

[SuperDwang]

how accurate is ur 509mm tightbore? Im about to slap one on my ICS M4 CARBINE xD so i would like to know if possible =)

[Calbrazil2007]

@SuperDwang I'm about to do the same to my ICS M4 as well, I'm installing a 509mm 6.03mm Madbull Ver. II barrel in it. So in a few days, I tell you how it turns out.

[SuperDwang]

@Calbrazil2007 cool thank you. im about to do mine as well. also to my AUG A3 JG :)

[MishimaZero]

which one do u think is better? KWA m16 or G&G blow back m16 ???

[airsoftrocky]

@MishimaZero kwa m16

[liveitonce66]

good stuff, well explained....im getting a custom m16 soon much like yours. gonna love it!

[airsoftrocky]

@liveitonce66 thanks for the comment

[ColumbusAirsoft]

its not "maw" its mili-amps but yes if you say MaH as a word rather than the acronym sure it would sound like "maw"

[airsoftrocky]

@ColumbusAirsoft i know its mili-amps per hour and its basically to make the phrase shorter.

[TheFamous9]

im pretty sure thats not an acog

[airsoftrocky]

@TheFamous9 its not sorry thats along time ago when i was just getting into airsoft

[bernsan443]

can m4 magazines work in this rifle

[airsoftrocky]

@bernsan443 yes... havn't had a problem with any m4 mags fitting in this one

[ColumbusAirsoft]

@bernsan443 for future reference... m16 and m4 mags are exactly the same build... the only variation you would see is length.

[DOZER671]

how does it work for you in CQC environments?

[airsoftrocky]

@DOZER671 it its quite cumbersome in CQC but you can still manage its just a bit more difficult than your standard m4

[goaliemaster33]

can you give me a link to the rail on the bottom?

[Favre1013]

Is it easy to upgrade the mechbox for a beginner? Shimming, greasing etc.....

[airsoftrocky]

@Favre1013 it is not reccommended, nor easy to upgrade as a begginer, take it to a tech, or learn in depth the gun you want to upgrade

[clonebandit]

how do you remove the forgripe on this gun? it is so hard if you have any tipe or tricks please tell me

[airsoftrocky]

@clonebandit i have to agree it is very difficult, just takes a while, keep plugging and you'll get it off

[xxkrazyairsoftguyxx]

Do you know what the rail is called, or who makes it, and how much money does it cost I have been looking for one for a while.

[snipingownsu]

this is a very helpful review :)

im getting the GR16 A2 (pro line not sportline) but same thing ;)

[airsoftrocky]

@snipingownsu thank you very much!

[TeamWarhawk]

where did you buy the rail for the handguard?

-John ~ Team Warhawk

[airsoftrocky]

@TeamWarhawk everything was bought from evike.com

[jordandotking]

Hey i have the same gun as you, i also have a grenade launcher. I dont want to spend loads on a front conversion. Where did you get the long under ris/ras rail from?

[airsoftrocky]

@jordandotking i got everything from evike.com

[elitekillful]

where did you buy the rail under the handguard and what is the brand?

[airsoftrocky]

@elitekillful im not sure the brand and i bought everything off of evike.com

[orlandofanofsoccer]

hey do you need a rail to put a red dot on it?

[airsoftrocky]

@orlandofanofsoccer yes you do... otherwise it won't mount to anything. any standard 20mm will fit red dots/scopes etc.

[BWeManX]

@LEGEND8081 To take off the carrying handle you just unscrew the two side screws. The screws don't actually "come off", just the tips. The screws just loosen a joint on the bottom that allows you to slide the handle right off. It's pretty convenient, actually...less small parts to lose.

[LEGEND8081]

hey can u take off the handle and replace it with a red dot and can u put a gernade launcher, laser, without the rail im a newb

[airsoftrocky]

you can do both :) both are a fairly easy process

[LEGEND8081]

o so i dont need a rail

[airsoftrocky]

@LEGEND8081 nope not to mount an m203 you can mount that directly onto your barrel

[abigbowlmovemnt]

what brand red dot sight is that? the last one

[airsoftrocky]

@abigbowlmovemnt UTG/ Leapers, and the other one i have is a 4 reticle reflex sight with 3 brightness per color settings

[Naruto726]

this gun shoots 405fps with .25g BB's and an m130 spring?

[mqm93]

@Naruto726 yes mate mine shoots 410fps 0.25 with m130 :D:D

its like 340 with 0.3

[Naruto726]

k thanks, is it really accurate with the .25g BB's?

[mqm93]

@Naruto726 have you seen airsoft rockys accuracy test bud if not check it out. what a did was after my m130 i added an 650mm 6.03 tight bore with a silencer. A was shootin coke cans from 130 feet :O:O.

[Naruto726]

alright thanks, i was planning on getting an m130 spring and 435mm 6.01mm tightbore for my m4 and cover it with a silencer

[mqm93]

@Naruto726 nice mate will be very accurate but remember 2 use the best bbs or they will get stuck in your barrel.Are you keeping the full stock with you 435mm barrel ?

[Naruto726]

Lol sorry, I don't really understand your question.

[whysogrim]

At an airsoft field with a FPS limit of 400 FPS, is that with .2 gram bbs or any.

[airsoftrocky]

usuallly regulated fields have 400 w/ .2 but i can get into a field that dont really care with 410 w/ .25g bb's

[airsofter4god]

not an acog

[airsoftrocky]

i understand that now... didn't know that when i made the vid... however looks a little bit similar to one...

[alexmd94]

vary nice gun dude. oh and make sure you do a review when you dont have to worry about waking some one up. it sounded kinda creapy.i might get a gr 16 in a while when i get the money.

[airsoftrocky]

thanks again! and ya i have a new gun now... subscribe and check out my channel for the latest vids

[DeAthZReApEr760]

May I know which spring is better to get? A Madbull M130, Guarder SP130, Echo1 M130, G&G M130, or Systema M130? I need an advice, I am going to buy the spring soon but can't decide which is better to get because they all have different FPS. Please reply back ASAP. Thanks

[airsoftrocky]

mine i believe has a systema m130 in this video.. but all do the job.. id stick to systema or g&g

[DeAthZReApEr760]

@airsoftrocky : Okay thanks. I might get systema

[deathuntert]

For some reason I cant figure out how to open up the gun to get to the gearbox, instead of the pin that I can just push out to get to it (like my other guns) there is that screw there that doesn't seem to come out, can you help me? aha

[airsoftrocky]

hmm.. oh the rear pin. what you have to do if u want to remove JUST the gb is get a small flat blade screw driver and unscrew either side while holding the other side so it doesnt turn. lemme know if this helps... send me a pm if you have anymore problems

[deathuntert]

Thanks, I'll try that

[MistroJoe]

You should stick duct tape on your mag, that's what i did my gr 16's mag well, it was wobbling with a jg hi cap, fixed it., plus it kinda looks cool, or that could just be me being a bit weird. lol

[airsoftrocky]

@MistroJoe Thanks!

[freyziibubble]

No worries, glad I could help, (on my sisters account)

[smackheadshot]

Did you say pictionary rail?! I think you actually meant to say picatinny rail...

[airsoftrocky]

@smackheadshot ya haha... thanks for the correction

[pokrmastr29]

Hey airsoftrocky, Do you know what this gun would chrono at with everything stock using .25g?? Any answer you can give would be appreciated. Thanks

[airsoftrocky]

id say around 330-340 fps somewhere around there, with a 9.6v battery and stock gun

[kulbren]

would u recommend a AGM M16A3 with a M135 tappered ELEMENT spring along with metal springguide and pistol and gears.. u know.. all the stuff that would support it, would u reccomend it?

[airsoftrocky]

no i would never reccomend a china made gun, weather your willing to upgrade it or not, it always ends up costing more than getting higher quality parts. DON'T GO WITH CHINA MADE GUNS!!! Try Japan or Taiwaneese made guns they have decent quality control and are better in the long run

[Blackpeaoplerule]

these reviews bore me to hell

[airsoftrocky]

then don't watch them

[Thepigylord]

Hes an idiot... i mean look at his name

[14GiorgioS]

can the plastic A2 contain that rail on the forgrip?

where did you buy that from (the bottom rail)?

[MikeRizzolo]

where did you get the CA gearset im thinking about upgrading my gr16 and did you upgrade everything by yourself?

[airsoftrocky]

airsoft extreme, and yes I upgraded it all by myself, along with many more guns

[raccoonmatinginyour]

Whoah all those accessories must've cost close to the gun's price, lol. I just ordered the other day I believe the same gun, V16-a2? m16a4? It's by G&G too anyway as an m16 model.

[airsoftrocky]

no not really, id say for the scope/flashlights and mounts, maybe $100 max! but ya those are good guns! anything g&g is very reliable

[worldtour31]

with the mag thing you can just put tape so it doesnt rattle. and you could also put it near the top so that when you put it in it isnt that visible

[c4rn4g302]

do you know if the gun has the usmc engraving on the lower reciever no matter what reatailer you buy from?

[airsoftrocky]

i am almost positive this is there latest model which should have the usmc, before placing the order just ask the comp. before you order it.

[5959512]

My gun is gr 16 carbine, I just bought a systema magnum motor and sp 120 guader spring. will the stock gears hold up and if so could I get away with an sp130 spring

[airsoftrocky]

unfortunately, i would def upgrading the stock gears, as well as the stock piston, to run both the new motor and m120 or m130 springs, id reccoment a poly carb piston and reinforced high torque gears.

[HurtsWhenYouLaugh]

Can you put one of those rails on the top part of the for-grip?

[airsoftrocky]

you could if you wanted to, but i personally would get a full ris/ras if you were going to do that, and the top rail would look kind of foolish, in my opinion

[HurtsWhenYouLaugh]

Thanks for writing back.

[tnels95]

lol you sound like christian bale batman I AM BATMAN

[airsoftrocky]

hahaha thanks!

[ScaleyGuns]

NICE, hey does ur gun have feeding problems?

[airsoftrocky]

well it really depends on waht mags you use, but with the standard G&G high cap there are none so far!

[minghanliu]

where did u buy your bottom rails?

[BAYCITYAIRSOFT]

Its not ABS plastic its Nylon Fiber plastic

[airsoftrocky]

I'm sorry, I'll have to correct that! Thanks for the comment

[HorsesOny]

where did you buy this, and did it come with the marine body??? please write back

[xXDrummer96Xx]

ummm good review but id say its a little more then a "starting gun"

[airsoftrocky]

well yes, but just the base gun is a very good build, with good internals without breaking the bank, but also good for experienced players to upgrade, etc...

Thanks for the comment!

[melgd23]

i just ordered the r4 commando version with crane stock and rails and i hope its as nice as that well shorter but ya nice vid 5 stars

[airsoftrocky]

thanks for the comment, the r4 is very nice, i was concidering the r4 for awhile but decided this was a better value, but now that i think about it the r4 will look alot more clean and able to accompany a wide range of accs.

Thanks for watching

[melgd23]

yathats why i ordered it

[airsoftrocky]

cool, when u get it i'll be waiting to see a review im curious to how it preforms and looks

[melgd23]

ok i first want to screw around with it but in like 2-3 weeks the review should be up

[airsoftrocky]

ok cool! thanks

[melgd23]

ya but at the earliest itll be monday cuz thats when its coming.

[BIPTrooper]

nice replacement for your previous airsoft. How accurate is it and how far of a target can you get?  Nice review

[airsoftrocky]

yep thanks! and this thing is very accurate, i havn't totally measured the distance but i would say around 200 or so feet! but that is def a rough estimate! with the tight bore i bet i could hit targets all the way out to 250 ft or so