ak47 disassembly

[securitytard]

thanks for the info I was having trouble with the gas tube

[ThunderRyke]

How did i get here from Bitch make me a sandwich??

[xCCxLa2]

Actually I do it less than 30 secs))

[MLGgamer50]

@xCCxLa2 the highest ak 47 disassemble is 58 seconds

[xCCxLa2]

@MLGgamer50 search on youtube "Сборка и разборка АК-47 за 11 сек!" If only I do it in 58 seconds, my teacher will kill me)

[stevher]

Great Video, Thanx !!!

[Che762x39]

Great instructions.

The manual in Russian did not make sense. Why would I need vodka to clean a rifle?

[LangTu1Doi]

Thanks buddy... I was having a hard time putting the whole thing back together until I watched this video.

[xZedsEmpire]

Thanks for the great video!

[NUMBERoneCANIAC]

My history teacher had her russian boyfriend come in and talk to us about when he lived in the USSR. He said at 14 years old he could take it apart in 15 seconds. Is that even possible?

[Asssassssuuka]

@NUMBERoneCANIAC watch?v=7gKG1j9VS_k

[xCCxLa2]

@NUMBERoneCANIAC Yes) it's true) I do assebly and disassembly in 28-30 sec, and it is only 9-10 seconds only for disassembly

[edwinalmonti]

THANK YOU!

[maybeso08]

damn it suks the stock cant come off

[deathmagnet78]

@maybeso08 the stock can come off, it just takes a screwdriver.

[KyleP133]

So easy a poorly educated, poorly fed, Russian peasant can do it blindfolded!

[curiousmarksman7]

Thank you for posting this video. I just bought my first AK and am learning how to disassemble it. It's nice to not just have crappy instructions, but quality instructional videos on youtube.

[Stealingmonwh11]

Thanks for the help bro this was great because the Manual sucks.

[Sennanchie]

I just wanted to say thank you for making this video. I am in the learning process of taking apart my AK and found your basic "tutorial" quite helpful. I know it's simple stuff, but when one is new to something it's always good to have a bit of a guide to help out.

[TheyxSeexMexTrollin]

I had a question, and was wondering if anybody has experience in swapping ak stocks. Will ak47 furniture fit my saiga 12? Thanks.

[antzel392]

you are right russian guy

[theTNoutdoorsman98]

thanks that helped alot

[ICantWaitForSkyrim]

this wasr 10 must have been machined to accept high capacity magazines.

[slightlyoutofreach01]

@ICantWaitForSkyrim You're joking...?

[ICantWaitForSkyrim]

@slightlyoutofreach01 What do you mean? A wasr 10 is a rifle made only to accept low cap mags. It has to be machined to accept a magazine greater than 10 rounds. Are you just being sarcastic? Poor attempt at humor my friend...

[slightlyoutofreach01]

@ICantWaitForSkyrim Sorry, I thought you were the one attempting to be sarcastic, because everything you've said here is completely false. All AK-style magazines are structurally identical, and there is no difference between low and high capacity magazines when it comes to how they lock into the rifle. I own a WASR-10, and it accepts everything from 10rd magazines all the way up to 75rd drum magazines with no problem and no machining.

[ICantWaitForSkyrim]

@slightlyoutofreach01 You can do some research and see that a wasr 10 rifle is made to only accept low cap mags, unless machined to accept anything beyond 10 rounds. I'm not doubting that there are wasr 10s that take high cap mags but factory original rifles only accept singlestack low cap mags, although they are frequently modified. I honestly just looked this up halfway through my message to make sure I'm not just bullshitting you.

[TheVacura]

does it bother anyone else that there are tons of comments in what looks like russian? or hebrew maybe?

[davedavedaveannoy1]

@TheVacura They are praising one of their nation's greatest accomplishments, its made by a national hero, and its provided fantastic defense for five decades and is admired the world over for its simplicity, reliability, firepower, and longevity. Americans patriots love their M16, Israelies love their UZI, Germans love their Glocks, the Belgians love their FN weapons, and the Russians love their AKs. Its only natural that they would frequent these videos. Why should that bother you?

[keres993]

@TheVacura Hebrew and Russian are two VERY different languages. They visually look completely different in almost every way...

[Schaffer1988]

Thank you that was very helpful

[qqwerty90]

Пахорукие поросята, даже правильно разобрать не сумели

[pyr0maan0]

@qqwerty90 это реплика denix, ее правильно нельзя разобрать.

[Xey1989]

Я плакал, когда увидел, что флажок можно подымать щипцами)))

[3100701]

@Xey1989 i cried too

[rcjunky53654]

I got a ak and a sks but I just got the sks a day befor we were going go shooting and the ak a day after so I have inlet shot the sks

[SwaffyX]

HOLY CRAP that bar under the barrel is a cleaning rod. I'm so stupid. [Well, not anymore.]

[VER10AAM35]

Thanks man, all I had to do was dissasemble he last peice.

[millstanger]

how difficult is it to take off the foregrip?

[lipas111111]

после отсоеденения магазина нужно зделать контрольный спуск а после извлечения шомпола - пенал

[yayfowaffles]

u forgot to take off the sight :P

[kingbigdawg9]

gun smith for the fire control??????????? ITS EASY AS SHIT

[vineeja]

much easier than the M16

[ChainGuN2]

This is why the AK47 is considered one of the best rifles ever, and why I love it so much. So simply and easy to disassemble and reassemble.

[Maht25]

i wish i could find that bullpup conversion kit because i'd use this video as a reference to make my AK one serious piece of hardware.

[xld3000]

@77blitzwing buy a galil then.

[mexanik052]

вобще то сначала отделяют магазин, а потом снимают с предохранителя! И к тому же щелчок и поднятие предохранителя в верхнее положение осуществляется после установки крышки ствольной коробки!

[mexanik052]

вобще то сначала отделяют магазин, а потом снимают с предохранителя!

[yamahabansheerider]

peace cup with AK47 loving it LOL

[genio0417]

its funny how the at the bigging of the video theres a cup behind the gun... funny how the cup has a peace sign yet u have a gun right infront of it

[chakodewatts]

Thznks for tha video very very helpful !!!

[Patriot1790]

Nice video my friend!

[KLove3232]

when doing this i realied i didnt have a cleaning rod but the one on my mosin fit it perfectly!!! gotta love the russians

[25Moncrief]

i put my reciever back on but it wont lock into place

[cdawgtv2]

@MrWinchester1995

It's illegal you'll have to get a semiautomatic ak47 rifle.

[Thiscrapsannoying]

haha nice peace cup! ^_^

[MrWinchester1995]

where can i buy a fully auto AK-47 in canada?

[47Akguy]

@MrWinchester1995 I dont know if this is a good answer the oly thing I can tell you is talk to the Canadian Police or Government thats all I can tell you.

[zip0v]

Very nice video.

[AkelA984]

Hehh so simple a child could do it... Great video, btw... AK FTW

[killeor59]

go to Playstation home if u want to fieldstrip it yourself

[IMDARKFIRE007]

@killeor59 ROFLMAO......i had the SAME thought bout the playstation home field strip of the AK. man i can NOT get the gold AK.....that shits HARD lol.

[londonpunk66]

woah woah ive been dealing with guns fora while whats that gas chamber? does it have any purpose or funtions?

[waurbenyeger]

@londonpunk66

When the round is fired the gas exiting the barrel goes up through the chamber, pushes a piston back and reloads a new round. Opposed to the 'blow back' style which uses the energy from the cartridge to push back the bolt and load a new round.

[skype7891]

Is that a preban? That wasr doesn't look like a POS lol

[BALJIT147]

sssoooo beautiful...

[thepoopstinks1]

ok now i have a question but it may sound stupid so be warned do u have to take off the muzzle brake in order to shoot your ak 47 because i seen some people shoot without it or does it stay there?because i really dont know much bout guns or rifles but i just turned 18 and baught a ak47 similiar to this

[skype7891]

@thepoopstinks1 You can start by going back to high school and learning the English language.

[thepoopstinks1]

@skype7891 wow what makes you think i dont know english if i know how to write it and speak it and that was my first language moron

[3flipnick14]

Its funny i disasembled my dads AK-47 all by myself the first time and i got all of it off except for the gas tube lol that just shows how simple this gun really is and how easy int is to strip and reassemble.

[petrolero666]

a fucking easy

[Streetisourocean]

wow...lol

[lostboys111]

i said it funny i know..

[masterjarred32]

i have nothing against the mentally challenged, but, are you perchance, a retard?

[toastiest1]

hello, I live in the US, and I need to know how I could get hold of this weapon, where to buy it, or any information on this gun. anything helps. please reply or I wont get any info. thank you.

[DethStench]

You can find it in a gun store or a gun show.

[Transporter1022]

i can field strip mine in about 6 seconds

[eseloks505]

will that all fit in a forwheeler /atv wheels???

[weewoodeal]

lol 3:32 of instructions and yer ready to go.. so simple

[willdog3]

ok, to all the retards on youtube, not all AK47's are fully automatic. the selector only has 2 modes, meaning its semi auto.

anyways, this is the best weapon ever made for its time, and is still a good cheap modern weapon. im getting one evry soon now. hopefully before christmas. thanks for the vid.

[Scrimblin]

Вообще то цель этого видео показать как правильно разбирать АК, а не сделать это за 8-9 сек!

[CptWiggles1]

@Scrimblin, Я согласен!!

[sEkyndaNt]

Разбор + сбор - секунд за 25-30. руки у него точно из одного места

[sEkyndaNt]

АХАХАХАХАХАХ, пиздец лох)

мы в школе АК за 8-9 секунд разбираем, а он 3 минуты с хуем мучался

[WestMidlandAirsoft]

airsoft gun?

[willdog3]

stfu!

[cekais3r]

Very nice vid, very clear to understand and simple. A few questions though, where did you get the rifle? is it a semi auto or full auto? is it legal in WI? Any help is appreciated, thanks.

[5965665]

I'll try to help you out redguard. It's semi auto, as indicated by the selector.  WI as I understand is a no-ban state, meaning they have not had their freedoms taken from them and don't suffer under an assault weapons ban. They do not enjoy Concealed handgun permits, which is a shame and needs to be addressed. Where he got it? No idea.

[cabelo020]

Counter-Strike :)

[momo1tm]

lol peace sign on the cup :D

[garykglo]

ЕБАНУТЫЙ АМЕРИКОС РУКИ БЛЯДЬ ИЗ ЖОПЫ РАСТУТ,НЕ МОЖЕШЬ СРАТЬ НЕ МУЧАЙ СВОЮ ЁБАНУЮ АМЕРИКОСОВСКУЮ ЗАДНИЦУ

[nopi265]

Thanks alot.

[nikola1994g]

I do it for 30 seconds)

[micpep]

NIce! Very clear!

[russelusha]

хули пинал даже неоткрутил

[SpiroHrvoje1989]

I find you can do away with the needle nose pliers when you want to lift up on the gas tube lever. I find the cleaning rod's recepticle for patches fits over the tab nicely and you can just use leverage to rotate it to the upright position.

[MKBhunter]

idk... nice vid? since u kno so much about guns...lol idk im bored so i watched it

[TheSwordOfLight1980]

I love the positive cheerful commentary.

[cedricalien]

I want an AK

[lucky0810982]

it is not complete procedure!!!

[Transporter1022]

Thats why its called a "field strip". Disassembling the gun only to the extent for necesary cleaning.

[sumosami]

This is not AK47 this is AKM

[mypreciouz]

pure nerd porn i love it :)

[makarukha]

при отведении затвора назад его не надо сопровождать медленно в исходное положение, а отпускать надо резко, чтобы не было захвата нескольких патронов!!!

[m6dm90]

in russia can you own an fully automatic akm or one of the new variants as a civilian

[israelll]

Is it normal to have a wide gap in the foregrip?

[Timisso1337]

That an impressive looking ak, it looks very high quality. How much did this one cost? would you recommend this model?

[misterh775]

to answer ur ? yes i have one and i recommend this model Romanian models r far the best next to the original Russian models and the price r in the range of $600+ to $700+ or cheaper.

[Timisso1337]

Thank you for the information. I should really consider picking one up just to be familiar with the platform considering its one of the most common assault rifles in the world.

[adamkings21]

Nice Video! It helped me alot! Question though, I have a WASR AK-47, I'm trying to buy some aftermarket parts and running into trouble knowing if it's milled or stamped? It's made by Century Arms, Romanian. Please let me know! Thanks a lot!

[hunterman875]

Question: does it function well? I hear a lot of bad things about Century Arms International, unfortunately. I just bought a Bulgarian AK-74 from them, but it won't be here for another couple weeks. What's your experience with the WASR?

[Spetsnazovets]

If only US importers could make a deal with IzhMash company to legally import AK-74, AK-10X and AK-107/108 all you american guys and girls would have a chance to own a genuine quality AK and not a foreign license (and unfortunately quiet often not so) produced copy. ATM you people are restricted to Romanian, Bolgarian and other kinds of copies that proven themselves to be highly inferior to even crude 1960s era AKMs from Russia that don't fail regardless of apparent crudeness of manufacture.

[hunterman875]

@Spetsnazovets True that, man. Still, though, I hear tons of good things as far as the reliability of our AKs. Still, they never compare to the real thing. But we get a lot of both good quality and bad quality AKs from various countries.

Regardless, I agree. It's a damn shame.

[Spetsnazovets]

There is only so much that can go wrong with such a simple device as a tried and tested AK. The weapon itself haven't changed. Changes happened in manufacturing, precision, materials, but the mechanism has stayed true to the AK-47. Except for the AK-107/108 which feature balanced action.

[hunterman875]

@Spetsnazovets Yeah, I think that's my favorite thing about them. They are crafted to such perfect simplicity. Even if different chambers, the gun itself is virtually the same. I have an AK 74, and the majority of the parts are interchangable with other AK parts. Obviously not all of them due to the many variants these days, but much of the parts are the same. It's very cool.

[Salamanderkill]

@Spetsnazovets Knock offs maybe, but the fact stands that this isnt like buying a cheap knockoff handbag made to look like a designer handbag. There are a few million (i'll be a tad conservative) people ready to measure, quantify, and report if there are "sloppy" designs out there.

[jiraiyajacob]

Its not bad, but I've yet to encounter a firearm as easy to strip as the AR-15. One pin and it falls apart for you.

[devicevox]

The AR-15 has a LOT more to strip than the AK. Do you possibly mean another weapon?

[weewoodeal]

lol hahaha ar15 easy they have so many parts inside

[nurmen1983]

In Army I dissassemble AK-47 for 7 seconds

[DaringWhitehawk]

How do I remove the stock to my Type-56?

[Airsoftrisupetteri]

It's copy of AK 47 so at same way

[jonystar5]

can you disassemble the rest of the gun?

[redguard]

yes. that would be a detail strip though. i do not recommend you doing it yourself. bring it to a gun smith. :)

[weerd2normal]

@redguard detail stripes are fun tho, then you put it back together and then you realize you didnt put the barrle back on securely.

[shishiromura]

@jonystar5 its not hard man, just look up the ak47nut he has close up on how to disassemble the bolt plus there are other people for the rest.

[KostyaMedvedev]

я в 13 лет лучше разбирал....

а че он щипцами флажок поднимал?

а про курок он и правду забыл 2 раза..

[KostyaMedvedev]

а не..1 раз

[trooperx666]

wow the ak47 is a really simple gun

[TheCrazyFinn]

Explains the popularity...

[drummerxp]

which is amazing considering it has such a simple design and it still never jams and has very nice fire power, and on top of all that, its easy enough for a child to use

[2g3b]

is there a way to take the foregrip off

[smilie120]

Look's really new and stiff :3

[iGOTCHOPPERS1]

i was looking for the way to remove my handguards (other than that i know the ins and outs of my Romanian WASR10). i unlatched the gas tube lever and im making sure that little piece isnt obstructing it to come out but it still wont come off... it wiggles slightly and i tried putting a little pressure on it but still no luck. im good with firearms and can dissasemble my AK in a few seconds (minus this part) so what the fuuuck

[iGOTCHOPPERS1]

ooooh the gun needs to be fully disassembled first, i feel stupid. i love how i answered my own question in less then 60 seconds though haha

[maximalist100]

Забыл оба контрольных спуска и затвор при перезарядке надо не сопровождать, а просто отпускать, чтоб снизитть до минимума риск осечки.

[Chiverra]

you've no idea how this helped me.... thank you dude

[AFOr3st]

Haha, XxILoveMyAK47xX here too!

Read comments of this dullard at "VSS Vintorez sniper rifle" (watch?v=10t5s7ViyO4). He allways says that romanian shitly weapons are better than russian. LOL.

[marxkarl44]

thats really easy.. is that really all? i have a chinese ak 47 that is in really good condition..

[XxILoveMyAK47xX]

It's not hard to disassemble and reassemble an AK,no need to make videos on how to do it,a child can do it and they do

[617Ghost]

Excellent video - the AK is a great weapon. Ordered my 2nd and 3rd last week.

PS: Romanian WASR-10s are often poorly assembled by Century Arms, and are probably the lowest of the low in US AK's. They used to sell for $250 - now can be found for $600-700! Do not pay over $400 for one of these. Beyond $400 - look elsewhere, namely Bulgarian, Polish or Yugoslavian. Arsenal (US based Bulgarian manufacturer) is excellent.

[mikevanross69]

I bought mine today its a Yugo made by Century Arms. Took it out to the range and it is a great gun.

[USMCxxZypern]

Damit I spent 400$ like 3 years ago for a WASR-10 are you sure they suck...in fact how the hell can an AK-47 suck?

[cookie58663]

I paid $560 3 years back for my GP it came with the accessories and 7 40rd mags and a 75rd drum with a AK74 type muzzle and no problems like mag wobble.

[Baabalaba]

I have a soviet issue AK for $550 and i thank you so much for helping me to reassemble it after taking mine apart to clean

[whodank]

At this current time, how much should i be paying for a Romanian? Went to a gunshow today and they were like 650 bucks, and looked pretty shitty.

[dremelinskov]

I dont' know where you went for that gunshow, but don't go back. A Russian-Made AK (Top of the line) Goes for around $550 to $600.

[whodank]

Yeh they are price gouging like hell. I have a Sig 556, so im not too worried about getting one. I just have near 3k rounds of 7.62 that need to be shot up, and the sks is a little slow for that.

[hybridatsun350]

Where are you finding Russian made AK's for $550? You must be mistaken.

[sglemus]

Thanks for the vid I'm lookin at buying an AK47

[Masterpower155]

very good instructional video .. thanks

[VikingoFromhell]

The most beutifull weapon

(L)

[jg54hitman]

In Bulgarian Army we do this for 8 seconds

[JerkbagProductions]

Nice, simple video. None of that 'gangsta' nonsense you see in some other videos. Thanks for this!

[ltcgyt]

The AK47 it's acclaimed to be probably the most simple rifle to use and mantain, but I find the FN FAL being even easier to field strip, or maybe that's because the FAL used to be my service weapon when I was in the army. Anyway, seeing this video the FAL is at least as rugged and simple to use as the AK47. Yet some people find the FAL to be complicated or "expensive", maybe the never actually even held one on their hands.

[VikingoFromhell]

The FAL rules

:)

[angelproductionz]

my m8ts dad can do this blindfolded

[Humanplyr1]

Nice, very very nice.

Wonder is there's one for the 22.Styer and it's big brother, the Minimi?

[guitarheroclanklol]

good video i've been looking for a vid about ak 47 dissembly.

[firekitty44]

dear god thank you for that, i was so lost

[AK410]

I love the subtle mug in the beginning:P

Thanks for the vid!

[9701237]

my vagina is SO sore right now!! lol my bf just got done f*cking me! 9

[redguard]

with an AK47? if not what relevance does it have with this video? lol. get well soon

[AK410]

LOL that beats random

[JerkbagProductions]

Ha, ha, ha.

[jjherrera3]

Awesome video; was lots of help!

[metalicmario]

I have a romanian ak and i was wondering what this one part was for. if holding the rifle like you are about to fire i would be on the left. its on the exterior of the reciever. it is held in by 3 pins. it looks almost like it could be used as a bottle opener. i was wondering what its for and can it be removed?

thanks

[theboneman1977]

it for mounting a scope.why anybody would ever put a scope on an ak i will never know

[chickenpotpie2008]

holy crap that looks so easy a caveman can do it!!

[moorsalin3]

cool, ak 47 i nice and simple